DEAL OF THE DAY MoreBeer!® Tap Handle for Recipe Kits
New Products Updated Weekly. See what's new in homebrewing.
Detecting your location...
$1 - $50

The FermWrap™ Heater | Fermentation Heater | 40 watts | 115V

    Description

    Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat.

    • Use alone or simply plug into the 110V heatnig plug on most popular temp controllers
    • Provides gentle, even heating with 40 watts spread over almost two square feet

    Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve.

    With 40 watts of heat spread over almost two square feet, it provides gentle, even heating.
    For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it.
    Specs:
    • 40 watts
    • 115V
    • 11" H x 25" W
    Item does not include carboy as pictured.
    Kegland Part number: KL0625

    The FermWrap™ Heater | Fermentation Heater | 40 watts | 115V

      Product form

      SKU: FE650

      $32.99

      Calculating shipping time...
      Shipping
      Free Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat.

        • Use alone or simply plug into the 110V heatnig plug on most popular temp controllers
        • Provides gentle, even heating with 40 watts spread over almost two square feet

        Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve.

        With 40 watts of heat spread over almost two square feet, it provides gentle, even heating.
        For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it.
        Specs:
        • 40 watts
        • 115V
        • 11" H x 25" W
        Item does not include carboy as pictured.
        Kegland Part number: KL0625
        Documents
        FE650
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.

        You Might Also Need

        Single Outlet GFCI Adapter
        Single Outlet GFCI Adapter
        $15.99
        Cool Brewing Fermentation Cooler Bag
        Cool Brewing Fermentation Cooler Bag
        $64.99
        Hood Thermowell For Smooth Neck Carboys - 15 in.
        Hood Thermowell For Smooth Neck Carboys - 15 in.
        $29.99
        Inkbird Digital Temperature Controller
        Inkbird Digital Temperature Controller
        $44.99
        #10 Silicone Stopper Thermowell
        #10 Silicone Stopper Thermowell
        $27.49
        Brewmaster #6.5 Stopper Thermowell
        Brewmaster #6.5 Stopper Thermowell
        $27.49

        Login

        Forgot your password?

        Don't have an account yet?
        Create account