BrewBuilt CoolStix™ Complete Kit for Fermonsters and PET Carboys

BrewBuilt CoolStix™ Complete Kit for Fermonsters and PET Carboys

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

Keep your fermentation temperature in check with the BrewBuilt CoolStix™ for Fermonster and PET carboys! Temperature control is one the most important aspects of a healthy, happy fermentation. When your fermenting beer gets too hot, the yeast will likely impart off-flavors that can easily overwhelm the taste of your finished beer. The CoolStix™ is a revolutionary cooling solution for carboys. It is easy to clean, easy to setup, and cools quickly and efficiently.

The BrewBuilt CoolStix™ uses a submersible pump to circulate cooling solution and a digital temperature controller to regulate flow. When the controller's temperature probe detects that your fermentation temp is getting too hot, it will power on the submersible pump to run ice water or glycol through the CoolStix™. Once the temperature stabilizes, the controller will shut off the pump and stop circulation.

This kit includes all the necessary hardware to set up and start using the CoolStix™ with a Fermonster or PET Carboy. It features a custom designed 3-hole silicone stopper (#10), specifically sized to fit the Carboy Carboy CoolStix™, a thermowell, and an airlock (airlock not included).

You will also need a cold water source to provide the cooling solution. For maintaining ale temperatures, a cooler or bucket of ice water is sufficient in most cases. For maintaining lagering temperatures or cold crashing, we recommend the Icemaster 100 Glycol Chiller.

Kit Includes:

  • Carboy CoolStix™
  • 2x Fitting Assemblies That Include:
    • 2x Push-In Fittings with 1/4" FPT
    • 2x Male Quick Disconnects with 1/4" MPT
    • 2x Female Quick Disconnects with 3/8" Barbs
  • Submersible Pump (800 GPH)
  • Digital Temperature Controller
  • Thermowell
  • 2x 5 ft. lengths of 3/8" ID silicone tubing
  • #10 Stopper (3-hole)

CoolStix™ Specs:

  • Diameter - 1/2"
  • Overall Length - 25½"
  • Bottom of CoolStix to Lower Assembly - 22"
  • Width from CoolStix to Barb - 5½"
  • Made from 304 Stainless Steel
California Recipients: See Proposition 65 Information
Item # GLY5100P2
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 1LBS

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 4 answers
I would like to purchase the cool stix kit but do not need the inkbird. Can u take it out of the kit?
Jeff Marsland on Jul 8, 2019
BEST ANSWER: Hi Jeff - Thank you for your interest in our products. Unfortunately, the Inkbird cannot be removed from the kit. Apologies.
Can this cool beer to lagering temp?
Jonathan Vermillion on Jul 13, 2019
BEST ANSWER: Hi Jonathan - The Coolstix includes the Inkbird temp controller which can control temperatures of -58° F through 210° F. So as long as you have a glycol chiller or can keep the ice water cool enough (32-40F) over a long period of time, lagering can be achieved.
Will this work on the new Fermzilla?
Ken Davenport on Aug 25, 2019
BEST ANSWER: Hello Ken - Thank you for coming to us with your inquiry. While GLY5100P2 would likely work, the usable length of cooling rod may be longer than the actual fermentation vessel of FE110 FermZilla. We would recommend the GLY5200P Universal CoolStick for this application. If you plan on purchasing the FE115 13.2 G FermZilla then GLY5100P2 may be the better fit. If you have any questions please feel free to reach out to info@moreflavor.com.

There are no reviews for this item. Write Review