Food Processing Equipment

These disposable muslin bags are a time saver! When you're done steeping, just toss them in the composter. At this price you can afford to keep a few extra on hand!   Note: These bags are better suited for grains and whole hops due to the looser weave. If using pellet hops, try our tighter mesh, reusable nylon bags.   5 in. x 15 in. Disposable Muslin

Read more less

Add hops or other boil additions while retaining most of the vegetal matter Leads to clearer beer and less transfer issues due to clogging Made from food-grade nylon that can be washed and sanitized between uses Drawstring keeps the bag closed and can be tied off to your kettle handle Holds approximately 2 oz of pellet hops after they swell up Reusable small Nylon Mesh Bags are an indispensable part of any brew day. These food-grade nylon bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation. Nylong bags are often times used to add pellet hops to the boil or as a dry hop in the fermenter. Retains the vast majority of the hop material, making for clearer beer and easier transfers. Can also be used to add smaller amounts of other adjuncts to the boil or fermenter, such as orange peel, oak, spices, etc. This small 6 x 8 inch nylon mesh bag will hold up to 2  oz of pellet hops after they swell up. Features a handy drawstring to keep the bag closed and tie it off to your kettle handle, spoon or mash paddle. Bag size is 6 in. x 8 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Reusable Nylon Mesh Bags are an indispensable part of any brew day.   These food-grade nylon mesh bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.   Used to add pellet hops to the boil or as a dry hop in the fermenter. Retains the vast majority of the hop material, making for clearer beer and easier transfers. Can also be used to add smaller amounts of other adjuncts to the boil or fermenter, such as orange peel, oak, spices, etc. 8 x 15 inch bag will hold up to 2 oz of whole hops or 4 oz of pellet hops after they swell up. Features a handy drawstring to keep the bag closed and tie it off to your kettle handle, spoon or mash paddle.   Measures 8 in x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

You love making beer. You give careful attention to each step in the brewing process. That’s why having a simple yet elegant way to complete one of those steps is indispensable. This fine mesh bag makes adding hops to your brew, and then removing them again, a breeze! The ultra-fine mesh fabric keeps most of the hop material from entering your fermenter. Great for additions of pellet hops during the boil! It also works well for dry hopping in the keg, with pellet or whole hops.   Note: Dry hopping with pellets in a keg using this bag will throw a little matter into your beer, but it settles out pretty quickly and we have had good luck with this procedure.    Perfect size for 1-4 ounces of pellets or 1-2 ounces of whole hops. Can also hold specialty grains Reusable Easy to clean Great price Bag size is 9 in. x 12 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Extra-large bag perfect for holding grain when using the BIAB or Brew-in-a-Bag brewing method Also works very well for pressing small volumes of grapes or fruit to extract juices Made from food-grade nylon that can be washed and sanitized between uses Drawstring keeps the bag closed and the contents contained Huge BIAB bag (29" x 29") Reusable Nylon Mesh Bags are an indispensable part of any brew day. These food-grade nylon mesh bags are more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation. The ideal Brew-in-a-Bag Bag. This huge mesh bag is made from sturdy, food-grade nylon and features a handy drawstring to help keep the contents contained. Also works extremely well for pressing small volumes of fruit solids for winemaking: just put the fruit in the bag and tie it closed, press the fruit, and remove the bag with the solids still inside—easy! This bag is made of nylon, and measures 29 in x 29 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

This 24-inch stainless mash paddle is the perfect size for most 5-gallon batch applications, and is well-suited for use with the BrewZilla, DigiBoil, Grainfather or Braumeister brewing units. Slotted paddle face gives you less resistance while stirring in extract or breaking up dough balls. Features a hole located at the handle end so you can hang up the paddle when not in use. 24" overall length, paddle is 4.5" long Paddle tapers from 2.5" to 1.5" wide 1/4" hanging hole 304 stainless steel construction   Kegland Part Number: KL03810

Read more less

1 gallon glass jug that works well for small batch fermentations of beer, mead, wine and More! Clear glass allows you to monitor fermentation activity as it happens Accepts 38mm screw cap or can be used with a #6 stopper and airlock Great for splitting 5 gallons of wort into small batches to perform yeast experiments A handy 1 gallon glass jug that is perfect for a small batch of wine!  Our 1 gallon glass jar works great for holding small amounts of wine or mead for aging, small batch fermentation, overflow storage and fermentation experiments. Some Suggested Uses: Use to store excess wine when you press off and have more than you expected. Ferment small batches of mead, sake, fruit wine or anything else that strikes your fancy! Perform yeast experiments - split a batch of beer into five 1 gal batches and ferment them with different yeast strains Uses a #6 stopper. Please Note: DOES NOT INCLUDE LID

Read more less

A great bag for larger brew in a bag recipes or just a large amount of steeping grains or whole cone hops. Made from nylon and comes with a drawstring. Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic, they're nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry, the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Great for smaller kettles to do Brew in a Bag recipes or just for steeping grains. Made from nylon this bag comes with a drawstring and measures 15 in. x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130& DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07245

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Perfect for Brew in a Bag, this large 32 x 22 in bag will fit pots up to 21.5 in. The bag comes with a draw string to sinch down on the rim of your kettle. Made from polyester. Can also be used for whole hops in hoppy beers.   Kegland Part Number: KL01298

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Semi-Automatic Precision: Delivers a consistent, professional-grade seal in just 3 seconds, eliminating manual lever variability and operator error. Universal Versatility: An adjustable platform fits standard 202 cans (12–16 oz) and can be adapted for 32 oz Crowlers or tin-plated food cans. Durable & Safe Design: Built with rust-resistant 304 stainless steel and a low-voltage 24V DC motor for maximum safety in wet environments. Compact Efficiency: A space-saving benchtop unit designed for easy one-person operation, making it ideal for homebrewers and nano-breweries alike. Superior Freshness: Provides an airtight, 100% light-proof seal to prevent oxidation and keep your beverage carbonated longer than traditional bottling. Power supply sold seprately. See below under You Might Also Need. The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. The Cannular Pro guarantees a perfect, repeatable seal by automating the seaming process. By eliminating the manual lever, it removes operator variability and ensures consistent pressure for every can. Key Features Semi-Auto Precision: Effortless operation that delivers a uniform, professional-grade seam every time. Universal Compatibility: Designed for all standard 202 cans, including 12 oz, 16 oz, 330 ml, and 500 ml sizes. Adjustable Platform: Features a built-in adjustable table to accommodate various can heights—no additional spacers required. Customizable Pressure: Easily fine-tune the platform height to ensure the ideal amount of sealing pressure for any batch. The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminum cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon). The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.   Power: As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans.   Why Cans? So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!   Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Splash guard not included Max Can Height: 7.75" (197mm) Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order. Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and you can expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. KegLand Part Number: KL15769

Read more less

24" long stainless steel spoon, great for stirring boiling liquids, mixing in hops, etc.  Features a wide stamped handle, and a hang hole at the end.

Read more less

Power supply for the Cannular Pro Semi Auto Can Seamer or MaltZilla Grain Mill. One end is an Anderson plug, which connects to the socket located on the back of the unit. The other end is a 110V plug to use with a standard power outlet. Kegland Part number: KL17336

Read more less

A great bag for brew in a bag recipes or just steeping grains. Made from nylon this bag comes with a drawstring and measures 18 in x 20 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Reusable Nylon Mesh Bags are an indispensable part of any brew day.   These food-grade nylon mesh bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.   Perfect for adding large amounts of whole hops to your boil, or to contain your malt in Mini-Mash brewing. Can easily hold 5 lb of milled grain. Note that this bag DOES NOT have a drawstring.   Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.

Read more less

Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price. Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!   Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted Handles on Kettle Body Kettle Lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for Extract Brewing!

Read more less

Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind Can accommodate kettles up to 20" Diameter or 250 lbs. (175 when using leg extensions) Leg Extensions are expected to be available in Late November.  

Read more less

Classicly styled hardwood mash paddle for stirring large amounts of grain.  This paddle features a "T" handle for better maneuverability.  They are made in the USA from white birch. 36 inches long. 

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel Approximate Internal Dimensions 13.75" tall 13.75" wide. This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

A great and inexpensive way to stir your grain when doughing-in. Will help prevent doughballs from forming. Made from a durable plastic material that will not scratch plastic mash tuns such as coolers. These are 28" in length, a perfect size for smaller mash tuns.  See items below for additional sizes.

Read more less

Glass carboy fermenter made from thick, high-quality, lead-free glass Perfect for fermenting beer, wine, cider, mead, and more! Clear glass allows you to monitor fermentation activity as it happens Smooth neck finish compatible with carboy hood or #7 stopper 6.5-gallon size offers plenty of headspace for vigorous fermentations If you are drawn to traditional brewing or you enjoy a simple setup, you will want to have a glass carboy for fermenting or aging your homebrew. The large 6.5 gallon size of this carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. They are made of thick, high-quality, lead-free glass which is impervious to oxygen. They do not scratch, which makes them easy to keep clean, and they're transparent so you can see what’s going on inside. This carboy will provide you with an enjoyable brewing experience for years to come. Dimensions: Height: 22.75" Width: 12.5"

Read more less

This digital thermometer is great for taking quick reads of your mash temp or strike water while it heats up. Features auto shut off to conserve battery life and folds up for easy storage. Reads in both °F/°C. Temperature displays within seconds of submerging the provce in liquid Measuring range: -58°F to 572°F (-50°C to 300°C) Automatic shut off after prolonged inactivity Folds for easy storage Requires one AAA battery (not included)

Read more less

Floating glass thermometer is great for mashing, monitoring wort temperature for yeast pitching, and of course, making cheese. The sealed glass housing can float in liquid, making it easy to monitor the temperature.   8" long, 0-220 degrees Fahrenheit range.    

Read more less

Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Canning beer can be a messy business. Keep your workspace clean with this splash guard! In order to have the lowest amount of dissolved oxygen in your canned beer, you need to place the lid on top of a nice layer of foam. The problem is, once the can starts spinning, all the excess foam gets thrown off in every direction. Add this splash guard to your seamer and contain the canning chaos! This unit is specifically made for the Cannular Pro model (CAN110). For the manual Cannular model splash guard, see CAN105. Kegland Part number: KL16728

Read more less

Perfect for fermenting small batches of beer, kombucha, wine, cider, mead, and more! Clear glass allows you to monitor fermentation activity as it happens Includes S-shaped airlock and airlock grommet This fermenter kit is great for those small one gallon batches. Whether you enjoy brewing small batches or want to test things on a small scale this is a great glass fermenter.  This is also a great fermentation setup for making homemade kombucha! Includes: Glass 1 gallon jar Screw top lid with hole and airlock grommet S-Shaped airlock

Read more less

The blades fold down allowing for easy insertion into a barrel or even a glass carboy. Ideal for mixing, stirring wine and works great as a degasser. As soon as you turn your drill on the blades expand to create a powerful stirring action. We do not recommend using in a carboy that is topped full because the stirrer displaces too much liquid and also creates a vortex that will send wine out the top. In these cases a hollow racking cane works exceptionally well. Works with 3/8" or larger drills. Stirrer is around 2' long.

Read more less

This therm features a 2" face, 9" long probe, and an adjustable kettle clip that displays the face at a convenient angle for hands-free viewing. 0-220° F range (-15 - 110° C). Calibration screw behind the face for adjusting temperature to a known standard.

Read more less