Logo
 

 

MoreBeer!
  1. Home
  2. BEER
  3. Beer Brewing Equipment
  4. Fermenting Equipment
  5. Fermenters & Accessories
  6. Plastic Carboys & Buckets
FerMonster Carboy - Lid With Hole
FE253
FerMonster Carboy - Lid With Hole
FerMonster Carboy - Lid With Hole
FerMonster Carboy - Lid With Hole
 

FerMonster Carboy - Lid With Hole

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid.

Does not include o-ring.

Item # FE253
Shipping Eligible for Free Shipping Program
Availability In Stock
Weight 0.12 LBS
Customers Also Purchased

Plastic Spigot For Bucket
$3.99

Replacement Washer for Spigot
$0.99

Airlock - 3 Piece
$2.99

Airlock For Fermentation - S-Shaped
$2.49

Universal Rubber Stopper - Size #10 (With Hole)
$3.69

FerMonster Carboy - 6 gal.
$34.99

FerMonster Carboy - 7 gal.
$35.99

FerMonster Carboy - Replacement Lid O-Ring
$2.99

FerMonster Carboy - Solid Lid
$4.99

FerMonster 6 Gallon Ported Carboy (Spigot Not Included)
$35.99

Fermonster Carboy - 6 gal. With Spigot
$39.99

FerMonster Carboy With Spigot - 7 gal.
$39.99

Two Hole #10 Brewmaster Silicone Stopper
$4.99

#10 Silicone Stopper Thermowell
$24.99

FerMonster Lid Opener
$3.99

Rubber Stopper - #10 With Hole
$3.39

Fermonster Carboy - 3 gal.
$23.99

Fermonster 1 Gallon Carboy
$16.49

FerMonster 3 Gallon Ported Carboy With Spigot
$28.99

FerMonster 1 Gallon Ported Carboy With Spigot
$19.99

The Fermonster/Carboy Carrier
$14.99

BrewBuilt® CoolStix™ Stopper for Fermonster & PET Carboys
$7.99

MonsterMesh Strainer for FermMonster Carboys
$6.99

MiniMesh Strainer for Vintage Shop PET Carboys & FerMonsters
$6.99

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Why did you choose this?
MoreFlavor Store
for my new fermenter
Jason B on Mar 2, 2023
It fits the Fermonster 7 gallon fermentor.
Tom B on Oct 31, 2022
for my new fermenter
Jason B on Mar 2, 2023
Extras
Leo Martinez I on Nov 22, 2022
It fits the Fermonster 7 gallon fermentor.
Tom B on Oct 31, 2022
Spare
Mark A W on Sep 15, 2022
I have been using this with Universal Rubber Stopper and works very well for wines
Sally K on Sep 1, 2022
just in case of failure
Terry W on Aug 27, 2022
Can't ferment without a lid.
Calvin N on Aug 12, 2022
recommended by another user
Rebecca M on Aug 1, 2022
Because they always break so I ordered a spare
Paul S on Jul 29, 2022
It is the one that I need.
William Rogers, Jr. on Jun 11, 2022
I need it
Tim Y on May 6, 2022
Replacement
Susanne F on Jan 10, 2022
Always good to have spares.
Aaron L on Nov 22, 2021
Want to use an airlock
David S on Oct 21, 2021
Must use with #10 for secondary fermenter
Michael S on Jul 23, 2021
safety redundance
Greg B on Jul 22, 2021
Helps to have a spare
Shawn M on Apr 23, 2021
BACK UP
FRANK M on Apr 22, 2021
Replacement parts
Nick G on Mar 9, 2021
Need it, should be standard
Louis H on Mar 5, 2021
Cant ferment without it
TomR on Feb 8, 2021
need to seal it, correct?
john b on Jan 25, 2021
To ferment with FerMonster instead of heavier glass carboy
Richard L on Dec 9, 2020
Back up if the one I am using breaks
Robert L on Oct 28, 2020
just in case
Frank V on Sep 24, 2020
Spare Lid
Ray W on Sep 9, 2020
It goes with the 7 gallon carboy
Theresa Jan E on Sep 9, 2020
Temp Twister
Greg H on Aug 11, 2020
Cause i need it
Daniel P on May 13, 2020
extra.
Lucas C on May 1, 2020
To add an airlock
Reed Harrison L on Feb 25, 2020
lids break need to replace
KYLE K on Dec 3, 2019
To have Spare part on hand
Gary Nalavany M on Oct 22, 2019
Online video
jeremy g on Oct 7, 2019
fermenter part
Jason C. Higgins on May 13, 2019
gift
CATherine c f on Dec 17, 2018
need to insert an air-lock
Kevin J. B on Oct 10, 2018
Backup spare
GARY N on Oct 10, 2018
Works
Steven E on Aug 22, 2018
I wanted an extra lid
Andrew St. M on Aug 18, 2018
Spare parts
Justin D. K on Jul 19, 2018
2 previous ones cracked. Do not over tighten! They're fragile
Jonas L on Jul 10, 2018
Replacement Cap
David D on Jun 11, 2018
B/C my other one was messed up
Seth H on Feb 20, 2018
Extras
Leo Martinez I on Nov 22, 2022
Spare
Mark A W on Sep 15, 2022
Can you drill a hole into this lid for a universal coolstix?
Blake U on Oct 14, 2022
BEST ANSWER: It is sturdy enough to drill a hole. I bought it because I cracked the lid on my fermenter by screwing it down to tightly so be careful not to screw it down to hard.
Does this lid work with the fermonster 1 gallon carboy also?
Nimar A on Jun 8, 2018
BEST ANSWER: Yes, these are standard lids for all FerMonster fermenters.
Reviews
Powered by Emplifi
3.6 / 5.0
16 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
5
1
1
3
Rated 3 out of 5
Not made to spec
The stopper fits nicely but all of theses lids don't fit exactly and the O-ring doesn't fit the groove.
July 30, 2023
Purchased
 over 3 years ago
Rated 4 out of 5
Improvement but not perfect.
Mostly it’s pretty good, but I have several critiques.
1. I was disappointed that it did not include an O-ring. The description on the website should make this clear.
2. It seemed to be even harder (i.e. nearly impossible) than with the original lid to get an O-ring to seat into the groove. Is the diameter of the groove just slightly smaller, maybe by a fourth of a millimeter? It would be good if an O-ring were included and were already seated, as evidence that it is possible to seat one.
3. There is now a small lip around the center hole, which seems like a good improvement. It sealed against the stopper easily and was airtight. In the original lid, in a couple of cases, I found that there was a small gap between lid and stopper, apparently due to the hole not being perfectly circular, and I was able to correct it with some fine sandpaper. The gap allowed CO2 to escape without bubbling through the airlock.
4. One of my original lids developed a small crack in the top, just above one of the vertical ribs, which is the reason I ordered a replacement. It does not appear that this area has been strengthened or reinforced.
So, overall, I’d say it is an improvement, but would benefit from further improvement.
March 21, 2022
Purchased
 over 2 years ago
Rated 5 out of 5
Always nice to have a spare.
December 13, 2021
Purchased
 over 3 years ago
Rated 5 out of 5
Need Several Without Hole
the carboy needs to be maybe 3mm thicker as there is tendency to buckle. Must exercise extra care. The Spigot does what I expect it to. Overall design could be more balanced especially the blo molding of carboy.
August 19, 2021
Purchased
 over 3 years ago
Rated 4 out of 5
Always have spares
If you overtighten (and you will), you will get hairline cracks on the top perimeter. You should always have a couple spares lying around.
July 4, 2021
Purchased
 over 4 years ago
Rated 5 out of 5
Fits well...perfect fast delivery
October 26, 2020
Purchased
 over 4 years ago
Rated 1 out of 5
Fatal design/manufacturing flaw
The lid is paper thin almost exactly at the place where most pressure would be - at the curve of the bend. I did not even use it and it cracked first time I was putting it on. I did not over tighten it even. See attached picture as to where it cracked. If this design flaw is not fixed - I do not think Fermonster is a viable product. (not counting issues with getting the O-ring to stay/snap).
July 10, 2019
Response from MoreFlavor
We're very sorry the lid cracked! Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Also, we know those o-rings can be a pain to seat. We have our video, "Installing gasket on the Fermonster Lid, to help with that. Cheers!
July 11, 2019
Graciela H
Rated 5 out of 5
Bought a new one to replace my old one that lasted for about 2-3 years
March 15, 2019
Purchased
 over 5 years ago
Rated 1 out of 5
Lids cracking all the time
I love the fermonster but the lids keep cracking, so I have to keep ordering replacements. I'm on my 4th replacement now. I'm not overtightening. Fermonster is a great fermenter but the lids suck. Sounds like I'm not the only one having this issue.
February 23, 2019
Purchased
 over 6 years ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. If you need any additional assistance please reach out to us at 1-800-600-0033 or info@moreflavor.com, Cheers!
February 25, 2019
Tyler W Staff
Rated 4 out of 5
O-ring falls out
The accompanying o-ring doesn’t fit securely inside the lid. Was able to get it to stay in there with a little keg lube, but wouldn’t stay in otherwise.
January 21, 2019
Purchased
 over 6 years ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...