Logo
 
MoreBeer!
Distillation Lid for 65L BrewZilla / DigiBoil
DS127

Distillation Lid for 65L BrewZilla / DigiBoil

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Used to adapt your 65L BrewZilla or DigiBoil into a still. Allows for a copper still top (DS120 or DS130) to fit on the lid.

Lid gasket included. Made from 304 stainless steel. Measures 16.25" in diameter.

The lid gasket has two distinct sides, one that is rounded and one that is completely flat. When installing the gasket the flat side should be facing up. Use one hand to stretch the gasket around the lid and the other to push the gasket into the channel.

Kegland Part number: KL10962

Item # DS127
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 2 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 17 answers
Why did you choose this?
MoreFlavor Store
i need it for distilling
Anthony Kandal on Mar 23, 2022
Because I drink
Mike F on Jan 22, 2022
i need it for distilling
Anthony Kandal on Mar 23, 2022
To use as pot still
Mark R on Feb 18, 2022
Because I drink
Mike F on Jan 22, 2022
Want to start distilling.
Valued C on Jan 3, 2022
I want the distillation add on for my 65L DigiBoil kettle.
CLAY D on Dec 30, 2021
want stainless lid for Digiboik
John Y on Dec 24, 2021
To have an extra
Jerry D on Dec 4, 2021
Gift
Jen Nate R on Dec 4, 2021
Perfect for my brewing and distilling
douglas p on Feb 10, 2021
Because I have to 65L DigiBoil
Daniel P B on Dec 4, 2020
to start running flavour extracts
Joseph M on Aug 18, 2020
To distill brew water.
Philip B on Aug 17, 2020
To use as pot still
Mark R on Feb 18, 2022
Want to start distilling.
Valued C on Jan 3, 2022
This may sound like a stupid question, but how did you get the gasket to stay on? I’ve had this lid for 6 months and haven’t used it once since the gasket pops off if I look at it funny.
Joshua Turner on Feb 20, 2022
BEST ANSWER: If you put one side on and then press it in with both thumbs and then slide your thumbs around the entire perimeter of lid. It helps if someone can keep pressures on the place you start from. When it's on, if you clamp the lid onto the brewzilla and leave it clamped for a couple of days that helps keep it in place. Also if you have any keg lubricant or lube for o-rings, that usually helps keep it in place.
What size weldless bulkhead fits the center hole 1.5 or 2 inch?
Curran McCalley on Oct 4, 2020
BEST ANSWER: Hi Curran, so its metric and I have one of the small stills fitted, the shaft is 4.5cm and the screw ring outer diameter is 6cm. I think the 1.5" would be close. Niall
Reviews

3.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
1
1
Rated 1 out of 5
Does not seal
Seal does not stay on no matter what I do. Read the issue in another review and thought that they were just crazy. Thought I finally got it, but noticed there was no activity in the airlock, peeked inside and the gasket was hanging halfway in the beer. Sealed as good as I could with tape. Would work fine for just a lid, but it’s not gonna seal anything. Morebeer sent me a replacement gasket. I might try it, but was soo frustrated with the first one, not sure I can go through that again
May 15, 2022
Purchased
2 months ago
Rated 2 out of 5
Lid leaks, poor seal for still use.
The lid is made with very thin gauge SS and flimsy. The 4 clamps aren’t tight enough to seal lid for use as still. I wonder if 8 clamps would be better. Anyway I used old school backwoods hack, plumbers putty and bricks to tighten and seal the lid down. I was expecting this to happen and luckily I was prepared for emergency fix. However I really like the electric kettle.
Looks pretty good but lid is rather flimsy and with only 4 clamp downs, it leaks badly.
I had to use plumber putty around the lid as well as bricks for “ballast” to provide tight seal.
Bricks and plumbers putty required to seal lid to DigiBoil 67L kettle
March 18, 2022
Purchased
4 months ago
Rated 5 out of 5
Works as advertised
Works as advertised would recommend to others
November 26, 2021
Purchased
7 months ago
Rated 5 out of 5
Exactly what I ordered
I haven’t used this item yet but it arrived quickly and exactly as described
December 12, 2020
Purchased
1 year ago