Logo
 

 

MoreBeer!
  1. Home
  2. BEER
  3. Draft
  4. Draft Beer Dispensing Equipment
  5. Taps, Faucets & Handles
  6. Beer Shanks
Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar
D1245A
Beer Faucet Shank | 4
Beer Faucet Shank | 4
Beer Faucet Shank | 4
Beer Faucet Shank | 4
Beer Faucet Shank | 4
Beer Faucet Shank | 4
 

Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar

THIS ITEM IS ON BACKORDER
Item currently out of stock
Description
Serious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel. 
 
This shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3/4".

Dimensions:

  • 5-1/4" - Total Length (Tip to Tip)
  • 4-1/4" - Shank Length (Without Nut & Nipple)
  • 3" - Thread Length
  • 2-3/4" - Pass Through Length

 

Customers Also Purchased

Perlick Faucet - 630SS Stainless Steel
$64.99

Drip Tray - 6 in. Wall Mount (Economy)
$24.49

Faucet Handle | Beer Tap Handle | Black Cylindrical Plastic
$4.99

Beer Faucet Wrench | Draft System Faucet & Shank Tool
$3.99

Hose Clamp | 1/4" to 5/8" OD Tubing Clamp | Stainless Steel
$1.69

Flare Fitting Set - 1/4 in. Nut & 5/16 in. Barb
$4.99

CMBecker Ball Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
$7.29

Perlick Faucet - 650SS Stainless Steel (With Flow Control)
$89.99

Intertap® Stainless Steel Beer Faucet | Forward Sealing
$39.99

Self Closing Faucet Spring | Intertap® | NukaTap®
$2.79

Stout Spout | Stainless Steel | Intertap® | NukaTap®
$14.49

Growler Filling Spout | Intertap® | NukaTap®
$6.59

Gas Manifold - 5/16 in. (Brass)
From $32.99 to $76.99

Gas Manifold - 1/4 in. (Aluminum)
From $26.49 to $54.99

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread
$4.79

Draft Beer Faucet Brush and Plug (Intertap/NukaTap/Perlick Compatible) - 2 Pack
$7.69

Perlick Faucet - 690SS Stainless Steel (Flow Control w/ Push-Back Creamer)
$104.99

NukaTap® Stainless Steel Beer Faucet | Forward Sealing
$40.49

Drip Tray - 15.7 in. Wall Mount
$65.99

NukaTap® Stainless Steel Beer Faucet | Matte Black Finish | Stealth Bomber Edition | Forward Sealing
$40.49

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 13 answers
Why did you choose this?
MoreFlavor Store
Gift
Buffy J on Dec 18, 2022
Fits the faucet and my needs
Stephen S on Feb 24, 2022
Gift
Buffy J on Dec 18, 2022
More beer
Matthew B on Mar 30, 2022
Fits the faucet and my needs
Stephen S on Feb 24, 2022
Because that's what my husband said he wanted
JULIANA D on Dec 14, 2021
setting up a new keezer with 2 more taps
John P on Dec 4, 2021
Because 5 inches was too long
James Brian M on Nov 2, 2021
Seems like it will workk
Timothy G on Oct 18, 2021
need/want stainless
Michael P on May 7, 2021
To replace a chrome faucet for cider
chris m on May 7, 2021
Great Price on a good product
Bryan & Jenna K on Mar 13, 2021
Very sturdy and corrosion resistant.
John M on Oct 10, 2020
To use with intertap faucet for self closing
Jon M on Sep 3, 2020
Replacement
Eric on Sep 1, 2020
Fit.
David Fontaine on Aug 26, 2020
Adding more taps to the keezer, can you dig it?
Kuumba S on Jul 27, 2020
because it's stainless
George S on Apr 3, 2020
Stainless and Length
Chris N on Mar 31, 2020
price /quality
Bradley J D on Mar 10, 2020
Best price out there.
Ryan V on Jan 31, 2020
trying it out...
Marc M on Dec 5, 2019
Always go with Stainless
Luis E Perales M on Nov 7, 2019
It fits/Stainless Steel
Marcus Mayer on Oct 17, 2019
WANTED ALL STAINLESS
Wade S on Jul 29, 2019
liked the removable barb plus stainless
Vernon L on Jun 17, 2019
Excellent reviews. Wanted high quality.
Rick W on May 7, 2019
Stainless. No brass touching my brew.
Eric M on Mar 21, 2019
recommended
John M on Jan 10, 2019
4 in is better than nuttin
MJ L on Nov 17, 2018
Stainless
David B on Sep 20, 2018
stainless and long enough for fridge door
MICHAEL R on Aug 21, 2018
304 stainless steel
Stuart C on Jun 28, 2018
I needed the length for my draft setup, plus I like the SS
Tim H on Jun 12, 2018
Ordered same before
Ron B on May 1, 2018
Quality
Kenneth K on Mar 26, 2018
building a keezer
Valued C on Mar 23, 2018
Bought 3 Perliss taps
Doug C on Mar 5, 2018
to install my new Perlick SS Faucet
Travis B on Feb 17, 2018
Recommended by keezer build guide
Chris K on Jan 19, 2018
More beer
Matthew B on Mar 30, 2022
Because that's what my husband said he wanted
JULIANA D on Dec 14, 2021
Are these shanks compatible with the Perlick Faucet - 650SS Stainless Steel?
Eustaquio A on Oct 17, 2018
Does this work with intertap faucet?
Jangho C on Jun 20, 2018
BEST ANSWER: Yes, this shank will work with Intertap faucets.
I ordered a shank and states may contain lead. Any concern here?
David M on Oct 18, 2019
BEST ANSWER: Hi David, for information about lead and lead compounds please review the information provided on the following site https://www.p65warnings.ca.gov/fact-sheets/lead-and-lead-compounds.
Does this shank work with Perlick 650SS Flow Control tap?
Jeff B on Apr 19, 2019
BEST ANSWER: Hi Jeff - These appear to be compatible, but we sometimes run into issues with intertap shanks and flow control faucets.
Is this compatible with Nukatap with self closing springs?
Roger F on Apr 20, 2022
BEST ANSWER: Yes, I have the exact same setup with self closing springs and no issues. I also have the nukatap flow control with self closing springs (they are not the same springs that fit the standard nukatap faucets.) and both work with this same shank.
Do I need a nukatap shank or will it work with any?
JORGE R on Apr 1, 2022
Beer Faucet Shank | 4
Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar
NukaTap® Stainless Steel Beer Faucet | Flow Control | Forward Sealing
NukaTap® Stainless Steel Beer Faucet | Flow Control | Forward Sealing
Beer Faucet Shank | Stainless | 4
Beer Faucet Shank | Stainless | 4" | 8 mm Duotight Adapter | Intertap® | NukaTap®
BEST ANSWER: I believe it's fine with any shank but make sure you have a shank washer, otherwise it will leak. Don't rely on it sealing on the plastic flow control part.
Can I change the shank tailpiece from 1/4"to a 3/8" so it matches up with the 3/8" SS coil MoreBeer sells?
Eric W on Oct 1, 2020
Beer Faucet Shank | 4
Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar
Stainless Draft Coil
Stainless Draft Coil
BEST ANSWER: Yes. We sell a 3/8" tailpiece separately as part number D1737.
Are these shanks compatible with the Intertap self closing springs?
Sam S on Jul 20, 2018
BEST ANSWER: Hello Sam - Yes, D1212 will be compatible. However, these springs are not to be used with flow control faucets.
Reviews
Powered by Emplifi
4.8 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
2
0
0
0
Rated 5 out of 5
Work Great
Love the back nut so you can use connection of your choice. Have move to this shank for all my draft systems.
December 8, 2020
Purchased
 over 4 years ago
Rated 5 out of 5
Excellent after years of use
Excellent tap shanks at a fair price. I now have five and would stick with these if I expanded our tap system.
November 25, 2020
Purchased
 over 4 years ago
Rated 5 out of 5
High quality
Bought all new shanks for a kegerator build. These are high quality and I am very happy with the purchase.
six new shanks
six new shanks
July 26, 2020
Purchased
 over 5 years ago
Rated 5 out of 5
Works Great
Exactly what I was looking for
April 22, 2020
Purchased
 over 5 years ago
Rated 4 out of 5
Qhality
The length I needed for kegerator wall. Top quality materials.
April 13, 2020
Purchased
 over 5 years ago
Rated 5 out of 5
All the pieces in one place!
Everything you need to get liquid to tap. Great package. Huge time saver (don't need to search for all the parts).
March 23, 2020
Purchased
 over 5 years ago
Rated 5 out of 5
Excellent
Works great. Use a 7/8” hole saw
March 11, 2020
Purchased
 over 5 years ago
Rated 5 out of 5
Only the best
just the best . That’s it
June 6, 2019
Purchased
 over 5 years ago
Rated 5 out of 5
Perfect.
A great compliment to the Perlick 630 Stainless Steel faucets I purchased. My keezer project turned out perfectly.
May 18, 2018
Purchased
 over 7 years ago
Rated 5 out of 5
Great product go stainless steel
February 24, 2018
Purchased
 over 7 years ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...