Logo
 

 

MoreBeer!
  1. Home
  2. BEER
  3. Beer Bottling & Kegging
  4. Kegging Homebrew
  5. Flared Keg Fittings
Flare Fitting Set - 1/4 in. Nut & 5/16 in. Barb
KEG640

Flare Fitting Set - 1/4 in. Nut & 5/16 in. Barb

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached.

Stainless Steel barb with a chrome plated Brass nut.

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
 
Item # KEG640
Shipping Eligible for Free Shipping Program
Availability West - In Stock
East - In Stock
Weight 0.18 LBS
Customers Also Purchased

Hose Clamp | 1/4" to 5/8" OD Tubing Clamp | Stainless Steel
$1.49

Flare Fitting - 1/4 in. Swivel Nut
$1.99

Flare Fitting - Washer
$0.49

Flare Fitting - 1/4 in. MFL x 5/16 in. Barb
$3.99

Flare Fitting - 1/4 in. MFL x 1/4 in. Barb
$3.49

CMBecker Ball Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
$7.29

CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
$7.29

KegLand Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Flared
$16.99

CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
$7.99

Sanke to Flare Adapter - 1/4" Male Flare
$7.39

Torpedo Keg Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Flared
$19.99

Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Flared
$21.99

KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Flared
$5.99

KegLand Ball Lock Quick Disconnect (QD) | Gas In | Flared
$5.99

Stepless Hose Clamp - 5/8 in. OD Tubing (20 Pack)
$9.99

CMBecker Ball Lock Quick Disconnect (QD) | Built-In Check Valve | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
$14.99

KOMOS® Gas Manifold | Aluminum | 1/4 in. Flare
From $24.99 to $34.99

KOMOS® | Stainless Flare Fitting Set | 1/4 in. Swivel Nut & Barb
$3.99

Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 9 answers
Why did you choose this?
MoreFlavor Store
I can use the same tubing for closed transfers and for purging kegs with fermentation CO2 just switch the qd from bev to gas6
Clifton L on Jan 28, 2023
So the regulator will match my other 5/16 fittings and tubing
Jason W on Jan 3, 2023
I can use the same tubing for closed transfers and for purging kegs with fermentation CO2 just switch the qd from bev to gas6
Clifton L on Jan 28, 2023
always making new tubing lines
Stephen S on Jan 3, 2023
So the regulator will match my other 5/16 fittings and tubing
Jason W on Jan 3, 2023
I'm building an oxygen free transfer system.
Rod W on Dec 31, 2022
Zachary Marin, Customer Service Representative, recommended this product
David W H on Dec 7, 2022
I need it
Mario O on Nov 18, 2022
Because I need it.
Bill F on Sep 28, 2022
Because it looked neat !!!! what is it for ??
Krestan Wyckoff S on Sep 26, 2022
I need it for my jockey box
Tom O on Sep 21, 2022
I only need 1 more
Todd B on Sep 9, 2022
quick connect
Doug S on Jul 19, 2022
need fittings
William K on Jun 14, 2022
Need meters
James b on May 17, 2022
They seem to wear out over time
Daniel B on May 3, 2022
Pressure transfer
John H on Mar 8, 2022
Using it for closed transfers
Patrick B on Mar 8, 2022
Cause beer
gabriel d on Feb 25, 2022
connection possibilities
Walter S on Jan 22, 2022
i need it
Robert B on Jan 4, 2022
Need easier takedown and setup of bottling lines. Also cost effective.
Martin J E on Dec 23, 2021
Thats what I need for the ball lock valves I ordered.
Arild S on Nov 24, 2021
1/4" barb did not fit my 5/16" line so i went to the flare setup instead
Joseph B on Nov 2, 2021
For gas connection
Harold H on Oct 28, 2021
Adding to my new kegerator!
Matthew on Oct 8, 2021
I need it
Ivan L on Sep 4, 2021
Always good to have on hand. I already have plenty of 1/4" barbs, but need more for the gas tubing.
Zach R on Aug 21, 2021
need two more
Dan on Jun 3, 2021
Need them
Dallas E on May 25, 2021
dispense and filter beer
Mike L on May 6, 2021
To make a Fermonster pressure kit
Scott O on Apr 28, 2021
Converting my lines to flare connections
phillip r on Mar 16, 2021
I need flare fittings
Patrick G on Mar 16, 2021
Need for adapting freon tank for gasoline storage
Garrett L on Feb 9, 2021
replacements
ed s on Feb 3, 2021
Insert Gas line check valves on 4 lines
Mike D on Dec 29, 2020
Building new flare hoses
Will K on Dec 28, 2020
I need it to make a gas line. The previous ones I ordered were good quality.
Mitch M on Dec 3, 2020
Transfer to keg
Ross Sigworth on Oct 13, 2020
used it before
Marty K on Oct 11, 2020
To use with 5/16 ID ultra barrier tubing.
Brandon W on Oct 9, 2020
replace plastic adapters
Eric T on Aug 19, 2020
to connect hose to connector
james w van d on Jul 28, 2020
Converting gas line
James Clark on Jul 9, 2020
Needed them to adapt my pin lock keg connections to 5/16" hose for Kegerator.
Michael M on Jun 18, 2020
To match 5/16 barb to not need clamp
Robert W on May 22, 2020
Spare
Kenneth M on May 18, 2020
required for gas tubing
Greg M on May 15, 2020
gas lines red tube
David K on May 2, 2020
Have 5/16 tubing
David H on Apr 25, 2020
Spares to have on hand.
Donald K on Apr 20, 2020
always making new tubing lines
Stephen S on Jan 3, 2023
I'm building an oxygen free transfer system.
Rod W on Dec 31, 2022
Do I need to purchase a flare fitting washer with this set?
Doc Farmer on Feb 26, 2018
1/4
1/4" Nut & 5/16 Barb
Flare Fitting - Washer
Flare Fitting - Washer
BEST ANSWER: Only if you are connecting metal to metal - such as a male flare on a manifold or regulator. If you are using it to connect to a beer or gas ball lock quick disconnect, then those disconnects have a bit of plastic built in, and you don't need to use the nylon flare washer.
Does this work with the stainless steel quick disconnect I just bought here at More Beer? Thx.
Chris T on Feb 2, 2022
BEST ANSWER: If you are referring to the Torpedo Ball Lock Quick Disconnect, or similar item, yes it works.
For the barb used in this set, does the recommended tubing size of 5/16" refer to the ID or OD of the tube? Which item# would you recommend for the tubing?
Dinakar Jayarajan on Dec 28, 2020
BEST ANSWER: It refers to a 5/16" inner diameter. There are a variety of options that will work all with their respective advantages. You can find them all on our website typing "5/16" into the search bar. The antimicrobial tubing is my favorite for a home kegerator.
Here comes a dumb one so brace yourself... can I (or should I) silver solder a stainless steel pipe onto this?
Eric H on Apr 27, 2019
BEST ANSWER: Hi Eric - I'm not sure what the exact application would be to solder a SS pipe onto the flare fitting. Would it be possible to explain a bit further?
Will your Flare Fitting - 1/4 in. Swivel Nut (Stainless Steel) work with the 5/16 barb this setup comes with?
Jason W on Jul 27, 2018
1/4
1/4" Nut & 5/16 Barb
Flare Fitting - 1/4 in. Swivel Nut Stainless Steel
Flare Fitting - 1/4 in. Swivel Nut Stainless Steel
BEST ANSWER: Hi Jason - Surprisingly, these will NOT fit together. KEG601 is designed for a 1/4" barb.
Reviews
Powered by Emplifi
4.9 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
1
0
0
0
Rated 5 out of 5
It does exactly what you were expected to do no problems here
December 28, 2021
Purchased
 over 2 years ago
Rated 5 out of 5
worked as needed on gas ball lock connector
May 20, 2021
Purchased
 over 3 years ago
Rated 5 out of 5
Works great
Does what is need for it to do
June 21, 2019
Purchased
 over 5 years ago
Rated 5 out of 5
Good product
Works as intended. Will buy again.
April 23, 2018
Purchased
 over 6 years ago
Rated 4 out of 5
Works fine , needs just the right torque.
March 4, 2018
Purchased
 over 6 years ago
Rated 5 out of 5
time and effort saver!
In the past I used the barbed gas/beverage ball lock connects for my kegs. I recently switched to threaded (flared). Using these (item # KEG640) as the female end on the gas tubing makes it so much faster and easier when filling a keg. I can hook the beverage ball lock connect to the gas tube to purge the keg so much easier now! I highly recommend!
May 5, 2014
Rated 5 out of 5
works great for my keg setup
No leaks. No problems.
June 13, 2013
Rated 5 out of 5
Nice for gas tubing
Versatile and leak free. These are great!
May 6, 2013
Rated 5 out of 5
No more cutting tubing
Like a poor man's quick disconnect. These works great when you want to unscrew your tube from a ball lock versus removing a clamp and cutting the tubing. Easy to install and clean, too. My whole system is using these now.
May 2, 2013
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...