Logo
 

 

MoreBeer!
Stainless Full Coupler - 1/2 in.
H631

Stainless Full Coupler - 1/2 in.

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects.

  • Length is approximately 1.5"
  • Max pressure rating of 150 psi.
Item # H631
Shipping Eligible for Free Shipping Program
Availability In Stock
Weight 0.18 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Weld less connection for sight glass
Kase L on Dec 5, 2022
Might help me install my bazooka screen
Jay F on May 26, 2021
Weld less connection for sight glass
Kase L on Dec 5, 2022
its hard to find
Kevin P on Mar 10, 2022
Might help me install my bazooka screen
Jay F on May 26, 2021
Was short 2
Kevin M on May 13, 2021
prefer stainless
Vernon L on May 4, 2021
Make a thermal well
anton g on Jan 8, 2021
Welding it into my boil kettle
Robert L on Oct 28, 2020
Building Homebrew All Grain Keg Brewing
Steven H on Aug 4, 2020
Need parts for to connect on Ice chest and then connect to FTS Immersion cooler
Chris H on Jun 23, 2020
Needed to sinc between spout and torpedo
Doug C on May 22, 2020
To add ports to my kettles
Dimitri K on May 21, 2020
To add a strainer to brew kettle
Buzz on May 2, 2020
to add elbow barb to bulkhead in HLT
Joshua R on Mar 13, 2020
Mash Tun Build
Ian O on Feb 12, 2020
Need for brew system I'm buikding
Antonio C on Feb 12, 2020
Because it is mis-spelt
Charles C on Jan 3, 2020
Brewery Build
Brett C on Dec 3, 2019
Mash tun build
Nicole T on Aug 29, 2019
Will connect to the "kettle tube screen" in my mash tun.
Joel S on Jul 22, 2019
Interface to my keg washer pump, and used with a CPC adapter
Gregory R on Jun 14, 2019
Building Mash Tun
Joe H on May 30, 2019
Rework brew pot
John W on Apr 12, 2019
switching from boil kettle to keggle
Keith H on Mar 14, 2019
Adapt fittings to kettle
Dimitri K on Feb 4, 2019
Fittings for new pump
James van E on Nov 30, 2018
Setting up a connection between my grainfather CFC and the grainfather recirc arm for single-stream cleaning / sanitizing
David C on Oct 18, 2018
For a kettle thermometer setup
Barry S on Oct 5, 2018
making my own whirlpool arm that hands in pot from side
stuart s on Jul 30, 2018
Helping a friend with a new brew set up this is for disconnects
Rob G on Jun 26, 2018
always a good thing to have around for your brewery
Timothy K H on May 25, 2018
its hard to find
Kevin P on Mar 10, 2022
Was short 2
Kevin M on May 13, 2021
Reviews

4.8 / 5.0
29 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
3
1
0
0
Rated 3 out of 5
Sloppy threads
The threads were not as clean or tight as one would expect
January 21, 2021
Purchased
over 3 years ago
Rated 5 out of 5
Review
Very good quality and useful as a connection.
December 4, 2018
Purchased
over 5 years ago
Rated 5 out of 5
It was exactly what I ordered.
February 22, 2018
Purchased
over 6 years ago
Rated 5 out of 5
Nice quality stainless
It's a decent quality stainless fitting, no problems.
May 27, 2015
Rated 5 out of 5
Solid, Great quality
I purchased this coupler to connect my pick up tube in my keggle. I used a 1/2" close nipple to connect the 1/2" ball valve to the keg there was enough thread inside the keg to screw on the coupler for the connection between the 1/2" compression fitting for the dip tube.
May 18, 2015
Rated 4 out of 5
High quality piece.
I purchased this coupler with a chugger pump and ball valve. Works great, but I wish it did have a wrench point on it to help tighten it down when using it.
May 12, 2015
Rated 5 out of 5
AS promised, Quality stainless products
MoreBeer delivers Quality Stainless items. I used this for the inside of by boil kettle, connecting a hop filter to a three piece valve.
May 11, 2015
Rated 5 out of 5
Awesome product.
Had my local welder install this into a kettle - works great.
May 8, 2015
Rated 4 out of 5
No problem
Use it for many of my connections without leak or problem
May 8, 2015
Rated 5 out of 5
Great Price and product.
Very Nice coupler, used it to connect a stainless screen to the mash tun.
May 21, 2014