The Mini Easy Siphon - 3/8 in.

• Starts siphon with a single stroke
• Made from BPA-free acrylic plastic
• Includes anti-sediment tip
• Easy to dissasemble for cleaning and drying
• 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers
• Mini Easy Siphon will reduce loss when racking from small vessels

The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers.

To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet.

Comes with 3/8" cane and 15" racking tube. 5/16" or 3/8" ID tubing must be purchased separately.

Maximum Temperature: 140°F (60°C)

Instructions: 

1. Sanitize and rinse your Easy-Siphon. 
2. Get the inner tube gasket and the outer tube wet. 
3. Attach the curved siphon to a hose. 
4. Submerge the end of Easy-Siphon into your container. 
5. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. 
6. Pull the inner tube up about 7" until the liquid fills the tube. 
7. Pump the inner tube down and siphon will begin. 
8. Pull out inner tube and sanitize Easy-Siphon for storage. 

This product is not resistant to high levels of alcohol. Do not sanitize with alcohol.

Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.