XpressFill XF260 | Volume Filler | 2 Spout

XpressFill XF260 | Volume Filler | 2 Spout

Optional Accessories  
60 day no hassle return policy. Details
Lowest Price Guarantee
This item has M.A.P. pricing so you can be confident you won’t find it for less.  Learn More.

  • Eliminate oxidation in your bottling process with the XF260 volume-based filling system
  • Wine is pulled from your barrel or storage tank by the built-in self-priming pump
  • Filling volume is programmed and stops automatically with an accuracy within +/- 1.5mL
  • Optional gas flush system
  • Made to order in the United States

Help eliminate oxidation in your bottling process by using XpressFill volume-based filling system!

Gravity-based systems usually involve wine being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. XpresFill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles.

To use, place two bottles under the filling spouts, push the gas button (optional at addtional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the wine from your barrel or stainless storage tank, distributes 750ml of wine to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. Realistically with bottle movement (and talking and drinking!) expect to fill about 200 bottles per hour with the 2 spout and 400 bottles per hour with the 4 spout. There is also a manual mode allowing you to top up bottles or fill odd size bottles (connect tubing and fill magnums for example.)

You my have seen this system for sale before as the Vigneron. XpressFill purchased Vigneron and redesigned the unit to be driven by a digital controller. The result is a unit that works much better. MoreWine! has tested the unit and we are happy with the performance.

The XpressFill is a a volume based system that fills each bottle with a set volume of wine (usually 750ml per bottle.) The fill is accurate to within +/- 1.5ml. However, bottles themselves can vary in volume by a couple percent and when you are filling by volume this can result in different fill heights, especially if you fill into the bottle neck, where differences are exaggerated by the small diameter of the neck. Fill heights will therefore vary from bottle to bottle but differences are usually 1/2" or less.

The two spout filler features a 3/8" inlet.

Further protect your wine from oxidation when using an Xpress Fill by adding the Gas Flush option to your filler. Push the gas flush button for as long as you like prior to each fill cycle. Inert gas will be forced into the bottle displacing most air, greatly reducing oxidation during the bottling process. You will need to supply an Argon or Nitrogen tank, regulator, and section of 1/4 in. tubing to connect an inert gas source to the machine.


Drop Ship: This product will ship directly from the supplier. Delivery may take 1–4 weeks depending on the vendor. Blichmann products are typically shipped in under a week.
Shipping Limitation: This item does not qualify for free shipping.
Item # XF260
Weight 25 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Used it previously
David W on May 5, 2021
Used it previously
David W on May 5, 2021
Have one that works great
Steve P on Apr 16, 2020
Have one that works great
Steve P on Apr 16, 2020

There are no reviews for this item. Write Review