Logo
 

 

MoreBeer!
Weldless Whirlpool Arm (Stainless)
WL305

Weldless Whirlpool Arm (Stainless)

THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

Want clearer wort? Quicker chilling times? Higher hop utilization during flameout? Achieve all this and more by upgrading your system with the new Weldless Whirlpool Arm by Fermentap! 
 
Designed to be installed underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. It also gives a much higher chilling efficiency when using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions! 
 
  • Made of 100% stainless steel 
  • It features a 1/2" Full Port ball valve and a 1/2" barb. 
  • The inner barbed elbow is 3/8". 
  • Features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connecting any brewing accessory you might want! 
NOTE: You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this. 
 

Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.

 

 

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Why did you choose this?
MoreFlavor Store
I wanted it
Jakob H on Feb 22, 2022
Installing into 2 new kettles. Great price and fully assembled
Jonathan W on Jan 6, 2021
I wanted it
Jakob H on Feb 22, 2022
side bar
JASON H on Feb 5, 2022
Installing into 2 new kettles. Great price and fully assembled
Jonathan W on Jan 6, 2021
Need it to complete set uo
Nicholas J on Dec 22, 2020
I need it and was a better deal than just the valse.
william h on Oct 28, 2020
Converting standard kettle into brew kettle using a pump.
Randy S on Apr 10, 2020
clarify wort
Thomas W on Jan 24, 2020
I wanted to add a whirlpool port to my kettle
Jeffrey P on Dec 27, 2019
I need it to whirlpool
Joseph G on Dec 27, 2019
Setup a whirlpool in my digiboil
joshuah57 on Nov 21, 2019
need it
William F on Jul 17, 2019
it was an all in one solution instead of piecing together
Todd on May 10, 2019
because I want to whirlpool using the new pump I just ordered
Aaron S on Apr 16, 2019
Because I can't weld SS
Jeff m on Apr 1, 2019
best deal for this assemble configuation
Brandan P on Sep 17, 2018
Been wanting to add a whirlpool arm since I bought a pump
Chad L on Aug 30, 2018
need a whirlpool arm for the kettle
Joseph A M on Aug 20, 2018
accelerated chilling and trub collection
Toby G on Apr 4, 2018
USE IN MY MASH POT
JIM T on Mar 22, 2018
side bar
JASON H on Feb 5, 2022
Need it to complete set uo
Nicholas J on Dec 22, 2020
Will this whirlpool a 1bbl batch? Or is it too small?
Joe K on Dec 25, 2020
BEST ANSWER: I would think it would be too small. I use it for 5 gal batches and would rate it adequate. you will need at least 1/2 id pipe throughout to properly whirlpool 15 gal.
Reviews

4.5 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
3
1
0
0
Rated 5 out of 5
Must have
Great addition to any brew/mash kettle!
User submitted image
Added Nov 15, 2020
November 15, 2020
Purchased
over 4 years ago
Rated 5 out of 5
Works great! Easy to install.
February 2, 2018
Purchased
over 6 years ago
Rated 4 out of 5
Great product
Creates a nice whirlpool. Installation is tricky, because the instructions do not say where exactly to install on the kettle, but the morebeer staff is very professional and prompt with emails. I'd like to see some sort of whirlpool device/arm that doesn't require drilling.
May 22, 2015
Rated 5 out of 5
Awesome
I tapped a hole in my 20 gallon Blichmann kettle, attached this unit and sets up a great whirlpool, even using 15 gallon batches
May 8, 2015
Rated 5 out of 5
Great addition to any kettle
I have just ordered by second one for my upgraded system and love this thing. Do need some real tools to get the 1" hole in kettle. I have had no issues with cleaning this piece and very little extra time has been required just recurc PBW thru system as always and give some time.
Great addition to any boil keg.
March 23, 2015
Rated 4 out of 5
Needs Full Bore Fittings
Quality is there just needs full bore fittings.
May 11, 2014
Rated 4 out of 5
Awesome product and price
This is a great product. I added it to our keggle for whirlpool and recirculating for cooling. Easy install. Quality fit and finish.
May 6, 2014
Response from MoreFlavor
I am considering purchasing this, however, I am concerned about cleaning requirements. Have you guys noticed sediment build-up in the pipe threads? Is this one of those things that has to be taken completely apart at the end of each brew day and cleaned with a toothbrush, or will running some hot PBW through it with the recirc pump do the trick? Adding another 15 minutes to my cleanup to disassemble, clean, dry, re-tape and re-assemble is not appealing to me...
December 14, 2017
Ryan Gibson
Response from MoreFlavor
I am considering purchasing this, however, I am concerned about cleaning requirements. Have you guys noticed sediment build-up in the pipe threads? Is this one of those things that has to be taken completely apart at the end of each brew day and cleaned with a toothbrush, or will running some hot PBW through it with the recirc pump do the trick? Adding another 15 minutes to my cleanup to disassemble, clean, dry, re-tape and re-assemble is not appealing to me...
December 22, 2017
Ryan Gibson
Rated 5 out of 5
Installation in Blichmann BoilerMaker
Home-brew heaven.

Used a Greenlee 730BB-1 Standard Round Knockout Punch Unit, 1-Inch, to punch a clean round hole in Blichmann BoilerMaker 10 Gal. Easy.

(I will likely get additional use out of this modestly expensive tool as 1 inch diameter holes are useful, e.g., my transfer tubes OD are
December 18, 2013
Rated 5 out of 5
Works great!
I agree with the earlier comment about the tools needed. All that said, I installed one on my 15 gallon heavy duty boil kettle, the installation went well and the unit performs great when coupled to a march pump. You need some manly tools to tighten it so it doesn't drip, but overall I would give it 5 stars.
September 27, 2013
Rated 3 out of 5
Great product, install not for all.
This weldless whirlpool fitting is a really nice product. For all the components that are built into it, it's a great value. The whirlpool, once installed, works very well. The biggest draw back is the need for the 1" hole to be drilled. The recommended step bit for drilling this out will cost you $45 to $80 depending on the quality of bit you buy. On top of that, your typical cordless drill may not be able to handle that size bit. Do you research first, if you don't own the tools, it may be cheaper to find somebody to weld a fitting for you. Cheers!
May 1, 2013
Response from MoreFlavor
The question not answered is... did the tool survive to fight another day, or was it spent?
December 14, 2017
Boonie
Response from MoreFlavor
I have drilled several holes into my kettle using a $8 step bit from harbor freight, worked great and cheap!
December 14, 2017
Wade O
Response from MoreFlavor
I bought a Heavy Duty Titanium Step Drill Bit, 7/16 to 1-1/8-Inch by 1/16-Inch Increments from Amazon for $10.50 (free Prime shipping) and have drilled 5 holes so far with it.
December 14, 2017
Steve
Response from MoreFlavor
The question not answered is... did the tool survive to fight another day, or was it spent?
December 22, 2017
Boonie
Response from MoreFlavor
I have drilled several holes into my kettle using a $8 step bit from harbor freight, worked great and cheap!
December 22, 2017
Wade O
Response from MoreFlavor
I bought a Heavy Duty Titanium Step Drill Bit, 7/16 to 1-1/8-Inch by 1/16-Inch Increments from Amazon for $10.50 (free Prime shipping) and have drilled 5 holes so far with it.
December 22, 2017
Steve