New Products Check out what's hot & new
BECOME A VIP Join the VIP text list
Detecting your location...
FREE FERMZILLA with every BrewZilla Gen 4.1 Dads & Grads · Ends in 7 days · No code needed
Shop the Bundle
$101 - $200

The Ultimate Sparge Arm

    Description

    MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!


    To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
     

    Features

    • 100% stainless and silicone construction
    • Two adjustment knobs make it extremely universal
    • Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
    • Included check ball will prevent back flow
    • Can adjust from the top of your kettle to 12-13 inches down into your kettle
    • A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
    • Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
    • Can be mounted on a lip that is up to 7/8" wide
    • Has a 1/2" FPT ball valve

    The Ultimate Sparge Arm

      Product form

      SKU: BE950

      $149.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including 1, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!


        To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
         

        Features

        • 100% stainless and silicone construction
        • Two adjustment knobs make it extremely universal
        • Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
        • Included check ball will prevent back flow
        • Can adjust from the top of your kettle to 12-13 inches down into your kettle
        • A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
        • Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
        • Can be mounted on a lip that is up to 7/8" wide
        • Has a 1/2" FPT ball valve
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 3.5 lb

        You Might Also Need

        Stainless Steel Quick Disconnect (QD) - Male QD x 1/2 in. MPT
        Stainless Steel Quick Disconnect (QD) - Male QD x 1/2 in. MPT
        $10.12
        Stainless Steel Quick Disconnect (QD) - Female QD x 1/2 in. Barb
        Stainless Steel Quick Disconnect (QD) - Female QD x 1/2 in. Barb
        $14.24
        Stainless Barb - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
        Stainless Barb - 1/2 in. MPT x 5/8 in. Barb (3/8 in. ID)
        $4.28
        The Ultimate Sparge Arm | Replacement Stopper Bumper
        The Ultimate Sparge Arm | Replacement Stopper Bumper
        $4.39

        Login

        Forgot your password?

        Don't have an account yet?
        Create account