Logo
 
MoreBeer!
Stainless Steel Weldless Thermowell - 100 mm
FE880

Stainless Steel Weldless Thermowell - 100 mm

$25.95
Returns
60 day no hassle return policy. Details
Lowest Price Guarantee
This item has M.A.P. pricing so you can be confident you won’t find it for less.  Learn More.
Description

Weldless Thermowell from Ss Brewing Technologies. The universal design allows for easy installation on most vessels (including Speidel!). A must have upgrade for your existing Brew Bucket. It is constructed from 304 stainless steel, and approximately. 6 inches in overall length, with the inner thermowell portion being almost 4 of those inches.  The thermowell fits into a 17mm punched/drilled hole.

Drop Ship: This product will ship directly from the supplier. Delivery may take 1–4 weeks depending on the vendor. Blichmann products are typically shipped in under a week.
 
Shipping Limitation: This item does not qualify for free shipping.
 
 
Item # FE880
Weight 0.05 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Why did you choose this?
MoreFlavor Store
Uh... I wanted a thermowell?
Phillip G on Oct 27, 2022
Because I need it and I know Ss stuff is quality.
Andrew J B on Nov 2, 2021
Uh... I wanted a thermowell?
Phillip G on Oct 27, 2022
installing into lids of Snapple bottles for keezer temperature control
Gary G on Jan 22, 2022
Because I need it and I know Ss stuff is quality.
Andrew J B on Nov 2, 2021
Replacing dial thermometer on my mash tun with a thermowell and digital thermometer.
Stephen S on Aug 17, 2021
Adding to kettle to use with temp controller probe
Brandon M on Apr 22, 2021
I've been wanting to add this thermowell to my 7gal SS Brew Bucket for a long time.
Michael D on Jul 24, 2020
repair
Tim M on Feb 20, 2020
To replace the weldless thermometer my 7 gallon fermenter so I can use a temperature probe/controller for fermenting.
Kevin B on Dec 9, 2019
It's what I need
Todd W on Nov 23, 2019
I have 3.5 gal ss brew bucket
James F on Nov 17, 2018
monitor / control temp of HLT
harry p on Sep 27, 2018
Adding to Speidel for better temp control
Peter Jackson on Apr 5, 2018
installing into lids of Snapple bottles for keezer temperature control
Gary G on Jan 22, 2022
Replacing dial thermometer on my mash tun with a thermowell and digital thermometer.
Stephen S on Aug 17, 2021
I have the SS Brewtech 7 gallon fermenter and just recently purchased an InkBird Wifi ITC-308. Will the probe from the InkBird fit the SS Thermowell? And which thermowell do I get. The 100mm, 200mm, or 300mm. Not sure what the differences are. Lastly, since the thermowell tube is not very long, I suspect that it cannot be placed in the lid of the fermenter. So where is the best place to drill the hole. Any suggestions would be appreciated. Thanks in advance
David Fullen on Feb 16, 2021
BEST ANSWER: Yes, the probe from the Inkbird Wifi ITC-308 fits perfectly inside this thermowell. The 100 mm length is suggested for the SS Brewtech 7 gallon Brew Bucket, which places the tip of the thermowell nearly exactly at the center of the volume.

You can drill and install your thermowell in any location you want, but if you want to replicate the BME drill the center of the thermowell port 4.5" up from the point where the cone meets the body aligned on center with the ball valve.

I found that if you want to brew smaller batches (say 3.5 gallons or less), then locate the thermowell port slightly lower based on the smallest volume of liquid you plan to ferment at one time. Measure twice, cut once, and Bob's your Uncle!
Thermowell | Weldless Threaded
Thermowell | Weldless Threaded
I need to replace the o-rings. What size o-ring will fit this Thermowell? Thank you.
FromLV L on Nov 29, 2019
BEST ANSWER: Hello Ann, we carry the replacement o-rings. They are 16mm x 1.8 mm N90 O-rings.
FTSs / Thermowell O-Ring Replacement 4 pcs  / 16mm x 1.8 mm N90 O-rings
FTSs / Thermowell O-Ring Replacement 4 pcs / 16mm x 1.8 mm N90 O-rings
I just received my order of your temp and flow control box, along with an SS Weldless thermowell.
I can only get the Ranco temp probe about 1/2" into the thermowell. It seems like the tolerance is so close that if I lightly sanded the probe it would work, but I don't want to ruin it? Any advice would be greatly appreciated!
JohnHlavka on Jan 21, 2019
Thermowell | Weldless Threaded
Thermowell | Weldless Threaded
Temp and Float Control Box - Original
Temp and Float Control Box - Original
BEST ANSWER: Hi John - Please contact us at 1-800-600-0033 or info@moreflavor.com for assistance.
Reviews

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Rated 5 out of 5
replacement part worked fine
replacement part worked fine
February 11, 2020
Purchased
over 4 years ago
Rated 5 out of 5
Thermowell
This is a simple thermowell with good sealing gaskets. I drilled a hole in the side of my 30 L Speidel fermenter and mounted it there. Works great, removes easily for cleaning and sanitation.
May 23, 2019
Purchased
over 6 years ago
Rated 5 out of 5
Thermowell
Easy install and works great
December 24, 2018
Purchased
over 5 years ago