Tapcooler Nanocanner™ Can Holder Attachment for 202 End Cans

Tapcooler Nanocanner™ Can Holder Attachment for 202 End Cans

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details
Lowest Price Guarantee
This item has M.A.P. pricing so you can be confident you won’t find it for less.  Learn More.

The Tapcooler revolutionized counter pressure filling your bottles, and now they've done the same thing for cans! Introducing the Tapcooler Nanocanner™. If you already have a Tapcooler Bottle Filler, you can get started filling cans with this Nanocanner™ can attachment. Simply purchase this with the magnetic bracket mount, and you'll be on your way to canning the way the pros do.

Only works with standard 202 end cans! You will also need cans and a can sealer.
Nanocanner™ Swivel, Seal, and Hold Can Attachment
The Nanocanner™ features an easy to use can attachment that not only seals the can, but also holds it in place so you can fill hands free! Simply lift the can into the attachment until it hits the seal, then move the swivel lock from right to left and you're all set. Now you can start filling!
Additional Products to Get Started
The Nanocanner™ can attachment is designed to be mounted to something, and cannot be used by itself. We sell a magnetic bracket mount that works great, and can be setup on almost any magnetic surface, like your kegerator. You can also design and build your own mount, and use the 4 included screws that come with the can attachment.

You will also want to get the following items for the complete Nanocanner™ setup (assuming you already have the Tapcooler bottle filler):

  • Beer Valve Keg Connector
  • Ball Lock CO2 Adapter
  • Pressure Relief Valve Drain Tube


Item # KEG893
Shipping Eligible for Free Shipping Program
Availability California - Out Of Stock
Pennsylvania - In Stock
Weight 0.51 LBS

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Only inexpensive option for can counter pressure . Filing but the break often.
Ed v on Jan 25, 2023
Only inexpensive option for can counter pressure . Filing but the break often.
Ed v on Jan 25, 2023
Looking for a way to remove 1 step in my canning process
David M Mitchell J on Jun 1, 2022
Looking for a way to remove 1 step in my canning process
David M Mitchell J on Jun 1, 2022

1.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 1 out of 5
Does not last…not even remotely.
It worked out of the box but starts to lose reliability by the third canning run. It stops being able to hold a seal as well. On the first canning run, 95% of cans seal the first time and hold their seal through filling. By the third run, about 5% will hold pressure. Lots of spraying foam and wasted beer. My impression is that this has not been tested for its longevity yet, but that short term testing suggests a good product. Not the case. This should cost $5.99 and be replaced after every other use.
May 24, 2022
Rated 1 out of 5
This thing needs work, Tapcooler!
I like the idea, but this thing needs some revision. It doesn't seal cans like the bottle filler does. There are small vent holes in the top that let foam run in, but there is no way to get the accumulated beer out of. I had it soaking in a dish of water and that did nothing to get it out. I sent an email to Tapcooler about the issue roughly 3 weeks ago and have not heard a peep back. Overall, you are better off just filling from a faucet like a pint glass.. and avoid this overpriced piece until there's some changes made -- like being able to fully dissemble the whole thing to clean out.
This shows the beer that weeped into the vent holes while filling cans and I cannot get it out.
The setup I have with the magnet mount and extension on the front of my keezer
March 18, 2022
over 2 years ago
Rated 1 out of 5
Broken after 5 canning days
First of all, this thing just never really sealed correctly. No matter what I tried it seemed that there was always some kind of leak at the top allowing co2 and/or foam to leak. And since I am sure it will come up, I was using 202 ends. I also purchased the overflow tube which worked about 50% of the time as it never actually seated inside the PRV. Finally today as I was finishing up a 16 can filling run, the tab broke clean off as I was releasing a can. This thing is made of plastic, not metal as it looks like and is not built well designed. Even if they offered a replacement, I would still look for another solution.
User submitted image
Added Dec 10, 2021
December 10, 2021
Response from MoreFlavor
We are so sorry to hear about your bad experience with the can holder. You are still within our return policy and warranty window for a damaged product. Please go to our website, scroll to the bottom of the page, and use the Return an Item form and we will set you up. Cheers!
December 16, 2021
Malcolm lieban