High Temp Silicone Tubing (1/2 in. ID) - By the Foot

High Temp Silicone Tubing (1/2 in. ID) - By the Foot

In Stock
60 day no hassle return policy. Details

Translucent, food-grade tubing temperature rated to 500F.
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps listed above, but we do not recommend it with a impeller pump or for use with household water pressure. 1/2" ID * 3/4" OD * Will burst at 30 PSI at 70F.

1/2" ID
3/4" OD
30 PSI Burst at 70F

Quantity ordered will be shipped as a single uncut length. Maximum length available is 100 ft.

Item # H985
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.25 LBS
QuantityBy the Foot
Inner Diameter1/2 in.
FunctionHigh Temperature
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

4.9 / 5.0
100 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great tubing
The tubing was perfect, with thick walls that you can more or less see the color of your wort. I especially like the pressure rating (30 PSI). I would highly recommend this product to every brewer, especially those that use pumps during their brew-day.
November 28, 2016
1/2 inch silicone tubing
Great product never kinks, easy to clean,
and More Beer must be taken lessons from Amazon play book,
they're shipping it is absolutely stellar
November 14, 2015
Great high temp tubing
This is excellent high temp tubing. I have never extracted any off flavors from the hose, even transferring boiling wort to my plate chiller. The hose is soft and flexible even after exposure to high temps on repeated brews. The flip side to that is that the hose can collapse or pinch if you try to route it at too steep of an angle.
June 1, 2015
Growler fills!
In addition to all the other uses mentioned by other reviewers, this tubing fits snugly over your standard "picnic faucet". Get and extra 10" and and start filling growlers of homebrew from the bottom up to minimize foaming and help prevent carbonation loss.
May 31, 2015
Response from MoreFlavor
Sorry, you'll want the 3/8" tubing to fit over you faucet.
December 14, 2017
Response from MoreFlavor
Sorry, you'll want the 3/8" tubing to fit over you faucet.
December 22, 2017
Works great!
This works great! I fabricated a Brutus like system and use this hose as my transfer lines with my pumps.
May 30, 2015
use this for all hot liquid transfer. it's easy to work with and easy to clean, doesn't kink when bent.
May 28, 2015
Excellent tubing
I like to use this kind of tubing on the outflow side of any transfer. I've had it collapse on me a few times if I use it on the inflow side of a pump. It doesn't kink, though, which is nice. It's also great for high temperature and it's easy to clean.
May 28, 2015
Excellent tubing
I built my whole 3 tier system using this hosing, and I absolutely love it. Doesn't stay kinked, easy to clean, transports boiling wort no problem. Can't think of a down side yet. I have used my lines at least 5 brews so far.
May 28, 2015
Use it!
You should use this when dealing with hot liquids as it is food grade safe.
May 27, 2015
best their is
I converted to kettles and they work great for transferring hot liquor, recirculating mash, and overall use with my pump. Durable, easy to clean and maintain, great tubing for all your brew day's work.
May 27, 2015