Robobrew / BrewZilla V3 All Grain Brewing System With Pump - 35L/9.25G

Robobrew / BrewZilla V3 All Grain Brewing System With Pump - 35L/9.25G

On Sale!
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the Robobrew is a complete turn key solution. The Robobrew is an all-in-one electric brewery that has built in elements for heating and boiling, programmable mash schedule and delayed start, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere. 

Automatic Step Mashing!
One of the coolest features of the Robobrew is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the "S1-S6" button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the Robobrew will sound an alarm and hold the last set temperature.

The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the Robobrew ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.

The built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included Robobrew stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.  

What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the Robobrew is the ultimate value. The cost is half of the next comparable system with programmable mash steps and nearly the same as buying converted coolers and a kettle. We've brewed on all the systems and we can truly say the Robobrew is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. We would choose the Robobrew model with the pump because the pump portion is really easy to use, increases efficiency, and eliminates temperature differences in the mash. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2' of silicone tubing for the sparge.    

Note: The manual references an element for a different market.  This unit comes with two heating elements for a total of 1,500 watts.

  • Features:

    • Stainless steel construction
    • 9 gallon total capacity with a finished beer output of 5-6 gallons
    • Digital temperature controller
    • Automatic step mashing with 6 programmable stages
    • 110V power and plug
    • Dual heating elements for total control (1000 watts and 500 watts)
    • Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
    • Immersion wort chiller included
    • Stainless steel malt pipe/basket
    • Stamped in volume markers
    • Glass lid
    • Magnetic drive pump for recirculation
    • Recirculation arm
    • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
    • 32.75 in H (with recirculation arm) x 12.5 in D
    • Recommended max. grain bill - 18 lbs
    • Recommended min. grain bill - 8 lbs

      You will Need:
    • 2' of H985 1/2" ID Silicone tubing for sparging and draining.
    • To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508). 
Item # AG475A
Shipping Eligible for Free Shipping Program
Availability California - Out Of Stock
Pennsylvania - In Stock
Weight 30LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 22 questions Browse 22 questions and 105 answers
Why did you choose this?
MoreFlavor Store
Value and loads of features. Perfect for 5 gallon batches.
Dave S on Jul 16, 2019
Great price and switching to all grain brewing.
Blake Smith on Jul 4, 2019
Value and loads of features. Perfect for 5 gallon batches.
Dave S on Jul 16, 2019
Had to have it, its gonna make me the beer king in my town lol
John L on Jul 15, 2019
Great price and switching to all grain brewing.
Blake Smith on Jul 4, 2019
A brewmaster friend of mine recommended this to me as I wanted to dive deeper into home brewing
Phillip S on Jun 28, 2019
Wanted it
BRIAN M on Jun 24, 2019
Compared to Grainfather. Extra cost of Grainfather didnt seem to be enough for the few features.
Ray De S on Jun 18, 2019
Referred by brother
Erika M on Jun 14, 2019
It looks like a major upgrade from our current "system"
Alexander K on Jun 12, 2019
Best features after looking at all comparable systems on the market
Terek W on Jun 3, 2019
i like the product
Jim H on May 31, 2019
Price & space savings
Robert W on May 7, 2019
Great Reviews and All Grain Brewing
Ronaldo G on May 2, 2019
Please hold delivery for 10 days as I will be away. Thanks
john f on Apr 13, 2019
Better value than other all in one systems
Dave T on Apr 12, 2019
Was looking for an econimcal all in one all grain system. Reviews on this system were mostly positive.
John W on Apr 8, 2019
Wanting to start all grain brewing.
Jeff Briggs on Apr 8, 2019
I want to brew beer in the comfort of my own home and try new flavors
Marvin B on Apr 8, 2019
Better than stove top
Jason P on Apr 8, 2019
Easy way to start all grain brewing
Michael S H on Mar 29, 2019
I want to brew more with less time investment. I hope to use the Robobrew to automate a lot of the otherwise time-consuming steps of brew day
Darrell B on Mar 18, 2019
After watching videos and reading reviews, I believe this system is a good fit for me.
Raymond Van N on Mar 11, 2019
was also looking for the Spark promo since the unit wasn't available when I tried to order earlier
Steve H on Feb 23, 2019
Getting back into all-grain brewing, BIAB is my preference. Seems like the perfect system for home and brew-ins with friends.
Michael W on Feb 23, 2019
After reading reviews and the price point this system will help me move to the next level in home brewing
JOHN P on Feb 13, 2019
Had been researching all grain brewing and this one was one I wanted
Walls P on Jan 29, 2019
grainfather died, trying a new system.
Heather B on Jan 29, 2019
Switching to all grain
Justin S on Jan 26, 2019
convenience of use
Charles C on Jan 26, 2019
I picked this product because its electric and I'm tired of spending money on propane. Also, bought this for accurate mash temps.
William Aaron P on Jan 12, 2019
Small footprint, Better features (larger grain bill, recirculation pump/pipe, etc) then M&B,
David S on Jan 10, 2019
Good reviews... eazer brew day
rick b on Dec 18, 2018
This can hold larger amount of grain
MJ L on Dec 14, 2018
Get out of garage in the winter to brew inside
mike Kinsey on Dec 14, 2018
May be a better deal than grainfather connect
Karin J on Dec 14, 2018
I researched a number of BIAB/electric kettle options and this was on top of everyone's list.
John M on Dec 10, 2018
Can't use propane in Condo complex
Joseph P on Nov 17, 2018
Looking to switch from a gravity, propane system. This seems like the best and easiest way
Mel I on Nov 17, 2018
Ease of Brewing and temp control
Kevin B on Nov 17, 2018
mechanical to full grain brewing
Wes B on Nov 17, 2018
Brad O on Nov 17, 2018
Looking to do some indoor electric brewing now that the weather is getting colder.
Matthew C on Oct 31, 2018
Gift for my son
Tammy N on Sep 27, 2018
Easiest way to get into all grain brewing.
James S on Sep 21, 2018
More automated indoor brewing. Step Mashing.
Robert T on Sep 17, 2018
Easy all in one system
Darren R on Aug 22, 2018
All in one brewing and cheaper than grainfather
Zach b on Aug 14, 2018
You tube video and the simplicity compared to my many tank and valves I currently employ
Valued C on Aug 7, 2018
seemed to be best value
Jim A on Aug 7, 2018
To brew consistently.
Steve T on Aug 1, 2018
William M on Jul 30, 2018
Had to have it, its gonna make me the beer king in my town lol
John L on Jul 15, 2019
A brewmaster friend of mine recommended this to me as I wanted to dive deeper into home brewing
Phillip S on Jun 28, 2019
what is the expected ship date?
Jon Untiedt on Mar 2, 2018
BEST ANSWER: Right now we are expecting them late May.
Are you guys going to offer the 240 volt version in the future? Its heating/boiling capabilities are way better using a total of 2400 watts (1900+500). That is the model that I want!!
Tim Turvill on Mar 2, 2018
BEST ANSWER: We are definitely looking into it. Thank you for your input!
To sparge do you need to heat secondary water and pour over the raised grains?
Kenneth A on Feb 26, 2018
BEST ANSWER: Yes, that's exactly what you do. I own the version 2 and it's quite easy
How does it keep the trub out of the drain?
Kenneth A on Feb 26, 2018
BEST ANSWER: There's a removeable screen/false bottom that you put in first before the grain basket that keeps everything out of the drain as well as the recirculation pump. Very easy to clean at the end of brewing as well.
Is the pump accessible?
Isaac Ramsey on Mar 5, 2018
The Australian version is 220v and provides higher wattage capability. Is a 220v version available? Special order maybe?
Allen Logan on Feb 25, 2018
BEST ANSWER: Unfortunately we do not carry the 220v version.
Do you sell the 220V power version?
Marco Barra on Feb 23, 2018
BEST ANSWER: Unfortunately, we do not carry that version.
Is this the version 3.1 with the Brewzilla interface?
Paul Adair on Apr 6, 2019
BEST ANSWER: Hi Paul - The product referenced in this question is the 3.0 version. The 3.1's will be available in a few months.
would this be good for biab?
Phillip Johnston on Aug 25, 2018
BEST ANSWER: It replaces the need for a BIAB. The inside cylinder is the "Bag." Go ahead, you won't regret this purchse.
Is there any kind of Flow control on the pump or is it just on/off?
William J Leeper on Apr 2, 2018
BEST ANSWER: Flow control is in the valve on the tube on the side.
What is the height of the kettle when measured from the top of the false bottom to the rim?
ANDREW EVANS on Apr 21, 2018
BEST ANSWER: From inside the kettle the distance from the false bottom to the rim is 16 inches.
My Robobrew only gets as high as 212 degrees, anyone else have that issue?
Chris Padilla on Apr 18, 2019
BEST ANSWER: This is not uncommon, in fact it is the norm. Water boils at 212 and will never get any hotter than that. Once it hits 212 it turns to steam and boils off. The water that is left behind has yet to reach 212. The only way to increase the temp would be to pressurize the unit to retain the steam, not a good idea. If you want your unit to boil harder, you need to insulate it to retain more of the heat that escapes through the sides of the kettle. You can do this by purchasing the insulating jacket that is designed for the purpose, or as I did, go to Lowes/Home Depot and buy a small package of thin foam insulation and wrapping the unit with several layers. I used 4. The retained heat will convert more of your wort to steam and it will boil faster. The temp may even go higher than 212 a bit as the wort will contain a bit more steam as it boils off.
Does this need to be vented for steam if used in the basement?
Steve Seithel on Feb 11, 2019
BEST ANSWER: Probably a good idea to vent if indoors. No danger like propane but it wii boil off almost a gallon of water vapor per hour. This will cause a large increase in humidity and could cause mold issues if not vented.
Where are these made/manufactured?
Ryan A. Brewer on Aug 9, 2018
BEST ANSWER: I think they come out of Australia.
Anyone knows the box size from Robobrew v3?
Aimbere Moura on Jan 29, 2019
BEST ANSWER: Hi Aimbere - By "box size" would you be referring to the controller module?
Can you whirlpool with the included pump?
Jay Penneau on Jun 15, 2018
BEST ANSWER: Probably. You would have to hold the silicone tub by hand to keep it pointed the right direction. Or rig a clamp of some sort.
Does this come with the silicone tubing for the recirculation arm or does it need to be purchased as an add on? Online reviews in user groups says its included, but here it says it needs to be purchased as an add on. Thanks
brian terwilliger on Feb 26, 2018
BEST ANSWER: This does not include the tubing.

You will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).
What is boil off rate? 1 gallon per 60 or 90 minutes like the mash and boil?
Craig neuberger on Apr 10, 2018
BEST ANSWER: Depending on batch size its around 1/2 gallon per 60 mins
Hello, I have the v3 and looking for the gasket that is located where the pipe fits into the female camlock. Does anyone know I can buy one? Thank you LJ
LJ on Apr 2, 2018
BEST ANSWER: I believe this is what your looking for.
Replacement O-Ring for Robobrew / BrewZilla / DigiBoil Ball Valve
Replacement O-Ring for Robobrew / BrewZilla / DigiBoil Ball Valve
Do I order the Distillation Lid for the robobrew?
Michael Corey on Mar 28, 2018
BEST ANSWER: Yes, however we do not carry the Distillation Lid.
Is there a warranty?
Isaac Ramsey on Mar 5, 2018
BEST ANSWER: Yes, there is a one year wear and tear warranty on the product.

4.4 / 5.0
41 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Excellent brewing system. Excellent service, mine was damaged in shipping and they sent me a new one right away no questions asked with a label to ship the damaged one back
Loving my robobrew. So much easier than current system and getting way better efficiency
Loving my robobrew. So much easier than current system and getting way better efficiency
June 29, 2019
1 month ago
Great system
I was hesitant to get into all grain brewing. With the heat down here in Florida I didn't want to use a gas system. I'm totally satisfied with this electric system. It's well designed and made. It's easy to use And my first batch turned out better than any of my 26 extract batches.
June 24, 2019
1 month ago
Great Brewing System
I bought this when I transitioned over to all grain brewing. This system is great.
Can do step mashing without much effort

programmable so you are ready to brew when you get home from work or wake up.

Circulating pump great for keeping an even temp and transferring the beer to the carboy

Price you basically get a grain father minus the counter flow chiller and the fancy wifi controller

Chiller: Most people don't like this chiller while it is not the best it does do the job and for the price you really can't complain. I run ice water through the chiller, the first 5 gallons of the hottest water I save for cleaning later. After that I continuously recirculate ice water and am able to cool in 30-40 min.

The controller location is awkward and forces you to bend down constantly to see the temp or work on a counter making it difficult to pull out the malt pipe.

Heat up time, I got the 110V version because I couldn't get 220V in my brew room without a lot of work. I new this would be a problem going in so I bought the neoprene sleeve to help
June 4, 2019
3 months ago
great system
very compact system works very well. first unit had controller issues more beer replaced it no hassle at all got new one back in less than a week. new one appears to be made a little heavier as far as electrical part are concerned. very happy with new unit and customer service is second to none.
May 31, 2019
1 year ago
Game Changer
I purchased this robobrew so I could do all-grain with less equipment, and to experiment more with different recipes. It's a huge game changer from my gravity system because I can set it to warm the mash water before I get off work and then start brewing ASAP. The first beer I made in the RoboBrew was a Scotch Ale with a 17 lbs grain bill. I had an efficiency of 90% using this system (which I think is great).
I'm already thinking about buying another on to double my experimentation rate.
Boil with the hop spider
May 7, 2019
3 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
May 8, 2019
Tyler W Staff
love this thing
I'm a relatively novice brewer. I've been doing BIAB and bought this due to needing a larger kettle. What a great system. It's easy to use, simple to set up and has everything needed.
May 3, 2019
3 months ago
great product for price
I have waited to review this, brewed about 7 batches with it so far. I did not have the insulated jacket or sight glass when i bought it. Both of those I have gotten and highly recommend with this. The insulated jacket makes a world of difference. i have made and IPA, A Black IPA and a Stout, with those grain bills i have only had two issues with the pump plugging up. It was a easy fix with shutting off the pump, attaching tubing to the spout and blowing into the pump. the other brews had less complicated bills. The black IPA called for adding hops to the mash and i think that was the problem there. otherwise just be careful after you lift the grain basket to drain, mine wasnt properly hooked in and fell back in. I think the manufactures should add a sight tube to the the next version, or offer a bundle with that included.
March 29, 2019
1 year ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
April 1, 2019
Tyler W Staff
Robobrew great way to move to all grain. Great price.
Had my first All Grain experience with the Robobrew! I got this because i wanted to be able to brew indoors and not have to use propane. The electric heater takes some time to heat up, but you can set it on a timer to heat up whenever you want to start brewing. (Set up the night before to be hot when you wake up). First batch had a stuck sparge, but i got around it. I had to constantly stir my mash to get it to drain. This then caused grain to get through the false bottom, causing a clogged pump. I got around these roadblocks and my beer came out great!! I later had to unclog and clean my pump. My second experience brewing on it was 2 weeks later and it was a much smoother experience. This machine is great but seems to be overshadowed by the more than the double the price grainfather. For the price i highly recommend this machine. My only complaint is that its hard to find videos, or directions on how to use this machine, which is why my first brew on it was a pain in the @$$. At the end of the day I made really good beer on it, and my second brew experience on it was a breeze.
User submitted image
Added Mar 8, 2019
March 8, 2019
5 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
March 11, 2019
Tyler W Staff
Great Brewing System
Love it, a great one pot brewing system that allows me to tightly control brewing temperature
February 9, 2019
7 months ago
3 brews in and it has performed flawlessly
February 2, 2019
6 months ago