Logo
 
Sale & Clearance
Deal Of The Day
Robobrew V3 All Grain Brewing System With Pump - 35L/9.25G
AG475A
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the Robobrew is a complete turn key solution. The Robobrew is an all-in-one electric brewery that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere. 

The built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included Robobrew stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.  

What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the Robobrew is the ultimate value. The cost is half of the next comparable system and nearly the same as buying converted coolers and a kettle. We've brewed on all the systems and we can truly say the Robobrew is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. We would choose the Robobrew model with the pump because the pump portion is really easy to use, increases efficiency, and eliminates temperature differences in the mash. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2' of silicone tubing for the sparge.    

Note: The manual references an element for a different market.  This unit comes with two heating elements for a total of 1,500 watts.

  • Features:

    • Stainless steel construction
    • 9 gallon total capacity with a finished beer output of 5-6 gallons
    • Digital temperature controller
    • 110v power and plug
    • Dual heating elements for total control (1000 watts and 500 watts)
    • Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
    • Immersion wort chiller included
    • Stainless steel malt pipe/basket
    • Stamped in volume markers
    • Glass lid
    • Magnetic drive pump for recirculation
    • Recirculation arm
    • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
    • 32.75 in H (with recirculation arm) x 12.5 in D
    • Recommended max. grain bill - 18 lbs
    • Recommended min. grain bill - 8 lbs

      You will Need:
    • 2' of H985 1/2" ID Silicone tubing for sparging and draining.
    • To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508). 
Item # AG475A
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 30LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 19 questions Browse 19 questions and 76 answers
Why did you choose this?
MoreFlavor Store
More automated indoor brewing. Step Mashing.
Robert T on Sep 17, 2018
All in one brewing and cheaper than grainfather
Zach b on Aug 14, 2018
More automated indoor brewing. Step Mashing.
Robert T on Sep 17, 2018
Easy all in one system
Darren R on Aug 22, 2018
All in one brewing and cheaper than grainfather
Zach b on Aug 14, 2018
You tube video and the simplicity compared to my many tank and valves I currently employ
Valued C on Aug 7, 2018
seemed to be best value
Jim A on Aug 7, 2018
To brew consistently.
Steve T on Aug 1, 2018
Convenience
William M on Jul 30, 2018
It's the bomb.com
Chris B on Jul 30, 2018
to make better beer
darin k on Jul 28, 2018
Good reviews and great price
Kenneth H on Jul 24, 2018
Price
Middlesworth, Chad on Jul 21, 2018
All in one electric brewing. Half the cost of the Grainfather with very similar specs. Great reviews.
JONATHAN C F on Jul 18, 2018
looked like a great product. Reviews convinced me
John m on Jul 14, 2018
Good reviews
Bill Z on Jul 11, 2018
Husband pick it out for his Birthday
Joan S on Jul 2, 2018
Want to do more brewing and generally on line reviews are good
Jeffrey R on Jun 26, 2018
Gift for husband
Celia S on Jun 26, 2018
Had the best reviews
Jerry H on Jun 26, 2018
Looking to simplify brewing and to do all grain indoors year round
Todd S on Jun 26, 2018
needed a way to better increase quality control
Chace T on May 22, 2018
Simplicity of design and use and option for electric indoor brewing when weather is bad
Curtis A on May 22, 2018
Small apartment
David C H on May 1, 2018
Reviews
Theodore K on May 1, 2018
as good as grainfather, but half the price!
Mattox B on Apr 28, 2018
Youtube review and use videos
Carlo E on Apr 25, 2018
Upgrading my equipment - less hassle/space required for storage
Henry E on Apr 24, 2018
Many great reviews and lots of research. Mainly the quality and value you get vs. other systems!
Keith W on Apr 24, 2018
looking for a simpler method than stove top kettles. Also wanting to move up from 1 gallon recipes to 2-3 gallon
mark r on Apr 24, 2018
Great price, good reviews, a chance to enhance my brewing quality
Frank S on Apr 24, 2018
i love beer ..free shiping
mike l on Mar 23, 2018
I watched the Short Circuit Brewers youtube video review.
Clem H on Mar 13, 2018
to perfect small batches
Kenneth Ackerson on Mar 8, 2018
Good equipment for price
Alex L on Feb 27, 2018
Half the price of grainfather
Jason Guthrie on Feb 27, 2018
Stop pump blocking
Larry A on Feb 27, 2018
Was considering this or grainfather. YouTube video and more beer review was the deciding factor with the price.
Michael D on Feb 27, 2018
I've been patiently waiting 6 months for this V3 Robobrew. It looks well-engineered, and I like how the pump and display are internalized into the base. Looking forward to using it at home (and indoors).
Richard Ten Hulzen on Feb 27, 2018
Value and price
Bob Grundy on Feb 24, 2018
great value
Scott J on Feb 22, 2018
Half the price of the GF
Sven M on Feb 20, 2018
good price comparable to models twice the price. makes for an easy brew day
Michael S on Feb 20, 2018
Good youtube reviews
Larry S on Feb 19, 2018
Easy all in one system
Darren R on Aug 22, 2018
You tube video and the simplicity compared to my many tank and valves I currently employ
Valued C on Aug 7, 2018
what is the expected ship date?
Jon Untiedt on Mar 2, 2018
BEST ANSWER: Right now we are expecting them late May.
Hello, when is the estimated arrival date?
alejandro on Mar 4, 2018
BEST ANSWER: This item is out of stock for the moment but we do expect to be back in stock around late May.
Are you guys going to offer the 240 volt version in the future? Its heating/boiling capabilities are way better using a total of 2400 watts (1900+500). That is the model that I want!!
Tim Turvill on Mar 2, 2018
BEST ANSWER: We are definitely looking into it. Thank you for your input!
How does it keep the trub out of the drain?
Kenneth Ackerson on Feb 26, 2018
BEST ANSWER: There's a removeable screen/false bottom that you put in first before the grain basket that keeps everything out of the drain as well as the recirculation pump. Very easy to clean at the end of brewing as well.
To sparge do you need to heat secondary water and pour over the raised grains?
Kenneth Ackerson on Feb 26, 2018
BEST ANSWER: Yes, that's exactly what you do. I own the version 2 and it's quite easy
Is the pump accessible?
Isaac Ramsey on Mar 5, 2018
BEST ANSWER: Yes
The Australian version is 220v and provides higher wattage capability. Is a 220v version available? Special order maybe?
Allen Logan on Feb 25, 2018
BEST ANSWER: Unfortunately we do not carry the 220v version.
Do you sell the 220V power version?
Marco Barra on Feb 23, 2018
BEST ANSWER: Unfortunately, we do not carry that version.
What is the height of the kettle when measured from the top of the false bottom to the rim?
ANDREW EVANS on Apr 21, 2018
BEST ANSWER: From inside the kettle the distance from the false bottom to the rim is 16 inches.
Is there any kind of Flow control on the pump or is it just on/off?
William J Leeper on Apr 2, 2018
BEST ANSWER: The pump on the Robobrew does not have flow control.
would this be good for biab?
Phillip Johnston on Aug 25, 2018
BEST ANSWER: Hi Phillip. The Robobrew V3 actually eliminates the three vessel two burner system. Consequently, I personally don't see a need for biab. My efficiency has been quite high with expected OG and FG coming very, very close to expected. Biab doesn't involve sparging and that seems inefficient to me. See the youtube videos on the product.

Bill
Where are these made/manufactured?
Ryan A. Brewer on Aug 9, 2018
BEST ANSWER: I think they come out of Australia.
Can you whirlpool with the included pump?
Jay Penneau on Jun 15, 2018
BEST ANSWER: Probably. You would have to hold the silicone tub by hand to keep it pointed the right direction. Or rig a clamp of some sort.
Does this come with the silicone tubing for the recirculation arm or does it need to be purchased as an add on? Online reviews in user groups says its included, but here it says it needs to be purchased as an add on. Thanks
brian terwilliger on Feb 26, 2018
BEST ANSWER: This does not include the tubing.

You will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).
What is boil off rate? 1 gallon per 60 or 90 minutes like the mash and boil?
Craig neuberger on Apr 10, 2018
BEST ANSWER: Depending on batch size its around 1/2 gallon per 60 mins
Hello, I have the v3 and looking for the gasket that is located where the pipe fits into the female camlock. Does anyone know I can buy one? Thank you LJ
LJ on Apr 2, 2018
BEST ANSWER: I believe this is what your looking for.
Replacement O-Ring for Robobrew Ball Valve
Replacement O-Ring for Robobrew Ball Valve
Do I order the Distillation Lid for the robobrew?
Michael Corey on Mar 28, 2018
BEST ANSWER: Yes, however we do not carry the Distillation Lid.
Is there a warranty?
Isaac Ramsey on Mar 5, 2018
BEST ANSWER: Yes, there is a one year wear and tear warranty on the product.
Reviews

4.0 / 5.0
25 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
4
5
2
1
One of the best 5 gallon system out there.
Great system. Love the convenience of it.
August 12, 2018
Purchased
1 month ago
Works very well
The grain basket handle is a little odd.
I will buy or make the blanket to insulate it as it loses temp quickly
But, all in all a very easy way to brew whole grain
August 5, 2018
Purchased
1 month ago
Amazing quality of life improvement over my old propane and cooler mash tun. My first one broke down but Morebeer replaces it quickly and without hassle, A+ service. I’ve brewed 25 gallons on the replacement without a hitch.
August 1, 2018
Purchased
4 months ago
Great system!
Great system! Will take a few brews to get used to but pretty easy to set up and use. Cleanup isnt too bad but I do reccomend a hop screen for hops and/or spice additions.
July 31, 2018
Purchased
2 months ago
Solid system, but bad QC.
Ill start by saying that i love the system, and the only downside with the actual system is that the screen is on the bottom, and that the pump is a little weak.

However i bought a brand new system, yet it had a quite large grind mark on the side of it. So it definitely doesnt look great. Still works, but pretty bad of their team to sell something like that. I dont think ill be buying from you again because of that. My friends with grainfathers never had this issue, yet i know quite a few robobrew owners who have had or have heard of this same issue.
Big ol scratch. So much for being a showoff in the brew room.
Big ol scratch. So much for being a showoff in the brew room.
July 28, 2018
Purchased
2 months ago
RoboBrew V3
So far I have used the RB V3 for 2x and each time them pump clogged. I thought the grain be was milled perfectly however I emailed Kegland and they recommended that I try a courser crush. Fingers crossed for next batch.
RoboBrew V3 in action
RoboBrew V3 in action
July 19, 2018
Purchased
2 months ago
Robo what?
I wanted to retire from propane filled days in my garage. I wanted to be done with strike temps. and converted coolers. I wanted a pump to recirculate.So temp controls in an electric all in one was my solution. Out of the box my take is: Why isn't some of this assembled already? Wow these instructions are poor and not even grammatically correct. The directions say to install a part it doesn't come with but on another page it says models made after x date wont come with it. Shouldn't the instructions in units constructed after that date have matching instuctions? OH crud there's a ding in the cylinder and a chunk of foam is missing from the handle on the sparge arm. ARGH!! There's bleeping hole in the water protection cover on one of the element switches. BLEEP!! BLEEP!! BLEEP!! Oh well, I'm not messing with an exchange via mail because that's a giant pain and the situation may not improve if this is indicative of the QC dept. If it works I don't care.
So after my first brew on the "robo" here's my take one step at a time. MASH: You pretty much still want to heat up the water strike temp because the electric heating is slowwwww. It's a little faster with both elements but you can't have the mash pipe/false bottom in with the big element on or it scorches. I also notices at this time that the ON/OFF switch for the large element doesn't really catch well. To the point I was worried if I would be able to turn it on at all. Anyway, Raising to 150+- with just the little element and your grain bill would take about a year maybe longer. Running the pump is imperative and I would advice you keep a thermometer in the top because I witnessed a difference in top to bottom temps of roughly 4 degrees. I will say that the 3 part video you might have caught online about a stuck mash was not a problem for me. It drained fine. SPARGE: HA! if you set up on a counter top you'll be standing on it later unless you're 9 feet tall. This is also a pain in the rear because there's no sight tube. So you've got left the now HOT and dripping wet mash up and out of the way enough to see what kind of volume you're starting with and you're adding sparge water at best guess quality. BOIL: Although it did reach boil (212 degrees) it stuggles to get much higher than that. The end result was between the low temp and the tiny hole in the lid there's very little boil off by comparison to propane boil. So what happened? I missed my OG target of 1.056 and got 1.044 because I had to much volume after the boil. BOOO! Also, the lid clamps stink. I had trouble getting my lid to sit flush and (probably due to low construction standards) when I put all 4 clamps down the dang thing leaked down the side and onto the floor. I spun the lid, clamped again, leaked again, same place. You want the lid on because it's keeping the heat in for the boil. Guess I'll be adding to my next grain bill and sparging less. THE CHILL: connecting the pump and driving it through the chiller was nice. But I'd always used a counterflow and it comes with an immersion, the tubing is different size so I used the counterflow it came with. Mistake. Best to keep 50lbs of ice handy next time or plumb up something else because after chilling it was still to hot to pitch yeast. DOUBLE BOO! To sum up, I'll use it again over my propane set up but I'll be adjusting recipes and my cooling process. Afterall, I was expecting some adjusting to a new system anyway. I'm not real pleased with the shape it was in when it arrived but maybe that's what you're really getting when you step to the grainfather.
July 19, 2018
Purchased
2 months ago
It came with fast shipping and it was a great early birthday present gift for my husband, he was so surprised and loved it, Thankyou again
July 8, 2018
Purchased
2 months ago
Ok but needs improvement
This going to be unfair since I just used it yesterday.
Overall, the system seems to work pretty good. Compact. Easy to clean and set. I was using 2 15g kegs and an 8g megapot for my old setup.
My gripes: Be carefull brewing hoppy beers. We used a bag for an IPA and it still clogged the pump which lead to disassembling to try to flush it out.
The actual material it is made of seems to be cheap. I didn't have the malt pipe just right, so when pulling it out I had to give it a slight twise and then pull leaving the metal scratched and flaking.
The bottom section that contains the chip board and pumped almost completely fell off, very poorly soldered on.
Overall: if you need a compact brewing system this may be the best choice. If you are just wanting to upgrade IE; get a pump or something like, keep your gear and just upgrade it. In hindsight that's what I wish I had done.
July 8, 2018
Poor Quality Control
The first unit I received was incorrectly labeled, with the sticker from the factory on the unit saying it was the version with the pump, which is what I ordered. It was in fact the version without the pump so I had to exchange it.

Now I have the version with the pump and it is completely unreliable. Sometimes the pump doesn't work, though it usually does. During my third brew both heating elements stopped working half way through the boil. Unplugging and resetting the unit got to 500W element back online, but the 1000W element still doesn't work.

Unfortunately this is a $500 cheap POS.
June 30, 2018
Purchased
6 months ago