BrewZilla V3.1 All Grain Brewing System With Pump - 35L/9.25G

BrewZilla V3.1 All Grain Brewing System With Pump - 35L/9.25G

Brewzilla Accessories  
Additional Accessories  
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the BrewZilla is a complete turn key solution. The BrewZilla is an all-in-one electric brewery that has built in elements for heating and boiling, programmable mash schedule and delayed start, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere. 

The V3.1 unit features a redesigned main circuit board with higher quality relays for improved reliability and heat resistance. Improvements between the V3.1 Robobrew and the V3.1 BrewZilla include upgraded rocker switches, bottom handle for easier lifting and pouring, and rubber feet to keep the base of the unit lifted off the ground.

To get the Wort Chiller Connection Kit for free, add the item to your cart along with the BrewZilla and use code ROBOKIT at checkout. 

Automatic Step Mashing & Delayed Start! 
One of the coolest features of the BrewZilla is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the "S1-S6" button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the unit will sound an alarm and hold the last set temperature.

The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the BrewZilla ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.

Great Components
The built in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter.

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it out and tabs at the base so you can set the malt pipe over the kettle to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.  

What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the BrewZilla is the ultimate value. The cost is half of the next comparable system with programmable mash steps and nearly the same as buying converted coolers and a kettle. We've brewed on all the systems and we can truly say the BrewZilla is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2' of silicone tubing for the sparge.

Use the Pump for More Than Just Recirculation!
One of the surprisingly handy features of the BrewZilla is that the recirculation pipe features a female camlock. This allows you to hook up other accessories and use the unit's pump for more than just recirculating wort. With a male camlock and silicone tubing, for example, you can use the internal pump to push wort through a plate chiller or counterflow chiller. Check out our selection of camlock fittings here

Note: The manual references an element for a different market.  This unit comes with two heating elements for a total of 1,500 watts.

  • Features:

    • Stainless steel construction
    • 9 gallon total capacity with a finished beer output of 5-6 gallons
    • Digital temperature controller
    • Automatic step mashing with 6 programmable stages
    • 110V power and plug
    • Dual heating elements for total control (1000 watts and 500 watts)
    • Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
    • Immersion wort chiller included
    • Stainless steel malt pipe/basket
    • Stamped in volume markers
    • Glass lid
    • Magnetic drive pump for recirculation
    • Recirculation arm
    • Bottom handle for easy lifting and pouring
    • Upgraded rocker switches
    • Rubber feet
    • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
    • 32.75 in H (with recirculation arm) x 12.5 in D
    • Recommended max. grain bill - 18 lbs
    • Recommended min. grain bill - 8 lbs

      You will Need:
    • 2' of H985 1/2" ID Silicone tubing for sparging and draining.
    • To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).
California Recipients: See Proposition 65 Information
Item # AG475A2
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 30LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 15 questions Browse 15 questions and 56 answers
Why did you choose this?
MoreFlavor Store
Need an All-in-one electric system for space requirements, this one seems like the best of them.
Erik W on Oct 4, 2019
pricing vs quality vs reviews
Rob Del G on Sep 23, 2019
Need an All-in-one electric system for space requirements, this one seems like the best of them.
Erik W on Oct 4, 2019
This is appears to be an all-in-one system that takes all of the variance out of the process which will enable a homebrewer to really focus on recipes, and ultimately, a more consistent product.
Zachary M on Sep 25, 2019
pricing vs quality vs reviews
Rob Del G on Sep 23, 2019
Mark M on Sep 6, 2019
cheaper than the Grain Father, similar reviews
steve r on Sep 3, 2019
good reviews, still a beginner brewer
Tim C on Aug 28, 2019
For my dads birthday :)
Nina Louise L on Aug 28, 2019
ease of use reviews, 110v electric
Kathleen P on Jul 22, 2019
Price and current reviews
Nicholas S on Jul 19, 2019
Almost as good as the grain father for half the price
Zachary T on Jul 18, 2019
This is appears to be an all-in-one system that takes all of the variance out of the process which will enable a homebrewer to really focus on recipes, and ultimately, a more consistent product.
Zachary M on Sep 25, 2019
Mark M on Sep 6, 2019
To sparge do you need to heat secondary water and pour over the raised grains?
Kenneth A on Feb 26, 2018
BEST ANSWER: Yes, that's exactly what you do. I own the version 2 and it's quite easy
How does it keep the trub out of the drain?
Kenneth A on Feb 26, 2018
BEST ANSWER: There's a removeable screen/false bottom that you put in first before the grain basket that keeps everything out of the drain as well as the recirculation pump. Very easy to clean at the end of brewing as well.
Is the pump accessible?
Isaac Ramsey on Mar 5, 2018
would this be good for biab?
Phillip Johnston on Aug 25, 2018
BEST ANSWER: It replaces the need for a BIAB. The inside cylinder is the "Bag." Go ahead, you won't regret this purchse.
Is there any kind of Flow control on the pump or is it just on/off?
William J Leeper on Apr 2, 2018
BEST ANSWER: Flow control is in the valve on the tube on the side.
What is the height of the kettle when measured from the top of the false bottom to the rim?
ANDREW EVANS on Apr 21, 2018
BEST ANSWER: From inside the kettle the distance from the false bottom to the rim is 16 inches.
My Robobrew only gets as high as 212 degrees, anyone else have that issue?
Chris Padilla on Apr 18, 2019
BEST ANSWER: This is not uncommon, in fact it is the norm. Water boils at 212 and will never get any hotter than that. Once it hits 212 it turns to steam and boils off. The water that is left behind has yet to reach 212. The only way to increase the temp would be to pressurize the unit to retain the steam, not a good idea. If you want your unit to boil harder, you need to insulate it to retain more of the heat that escapes through the sides of the kettle. You can do this by purchasing the insulating jacket that is designed for the purpose, or as I did, go to Lowes/Home Depot and buy a small package of thin foam insulation and wrapping the unit with several layers. I used 4. The retained heat will convert more of your wort to steam and it will boil faster. The temp may even go higher than 212 a bit as the wort will contain a bit more steam as it boils off.
Does this need to be vented for steam if used in the basement?
Steve Seithel on Feb 11, 2019
BEST ANSWER: Probably a good idea to vent if indoors. No danger like propane but it wii boil off almost a gallon of water vapor per hour. This will cause a large increase in humidity and could cause mold issues if not vented.
Anyone knows the box size from Robobrew v3?
Aimbere Moura on Jan 29, 2019
BEST ANSWER: Hi Aimbere - By "box size" would you be referring to the controller module?
Can you whirlpool with the included pump?
Jay Penneau on Jun 15, 2018
BEST ANSWER: Probably. You would have to hold the silicone tub by hand to keep it pointed the right direction. Or rig a clamp of some sort.
Does this come with the silicone tubing for the recirculation arm or does it need to be purchased as an add on? Online reviews in user groups says its included, but here it says it needs to be purchased as an add on. Thanks
brian terwilliger on Feb 26, 2018
BEST ANSWER: This does not include the tubing.

You will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).
What is boil off rate? 1 gallon per 60 or 90 minutes like the mash and boil?
Craig neuberger on Apr 10, 2018
BEST ANSWER: Depending on batch size its around 1/2 gallon per 60 mins
Hello, I have the v3 and looking for the gasket that is located where the pipe fits into the female camlock. Does anyone know I can buy one? Thank you LJ
LJ on Apr 2, 2018
BEST ANSWER: I believe this is what your looking for.
Replacement O-Ring for Robobrew / BrewZilla / DigiBoil Ball Valve
Replacement O-Ring for Robobrew / BrewZilla / DigiBoil Ball Valve
Is there a warranty?
Isaac Ramsey on Mar 5, 2018
BEST ANSWER: Yes, there is a one year wear and tear warranty on the product.

4.5 / 5.0
46 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great value for the money
Having come from an electric kettle and cooler mash tun, I was apprehensive about an all in one system. I’m so glad I chose the RoboBrew. It’s half the price of other all-in-one systems with similar quality and hardware characteristics. The switches are heavy duty and the heating elements do the job. It holds the temperature to within 2 degrees F during the mash and will bring 6 gallons of water mashing temperature fairly quickly with the neoprene jacket.

I found the boil to be perfectly adequate in terms of intensity but it won’t be quite as strong as a propane flame. It won’t affect your brew.

In terms of the onboard computer, it’s pretty basic. It will hold the temperature and change temp after a certain number of minutes. If you like more of a hands on experience, this is the one for you. If you prefer Bluetooth and a more technical experience, then you need to figure out if the extra $500-$600 is worth it. For me, this does exactly what I need.
September 21, 2019
1 month ago
Great product
I own a small nano brewery and we are using this for our pilot system. So far it has exceeded our expectations!
September 14, 2019
1 month ago
Arrived quickly and in perfect condition
Unit came quickly and in perfect shape. It works great. Only one brew in her but I am thrilled.
July 30, 2019
2 months ago
For the Family Brewer
This machine takes out much of the worry and anxiety of all grain brewing. When you have a family distracting you as you brew its nice to have a few things like temperature maintenance automated for you in a calmer indoor setting. I have less vessels less lines to be certain are sanitary and with the pump less jerry-rigged stands with hot wort at eye level or above.

For the most part you have to learn to brew well on your setup so transitioning to this will have its pain points and your heightened concerns about temperature and quarts per pound of grain, etc. but you can adapt to any setup given enough brews.

The setup is convenient enough with electricity that you can boil and then bring water back down to mash in temp. Pump is plenty powerful.
July 26, 2019
3 months ago
Works beyond Expectations
I really like this product and playing with it just a little bit
One can tweak it out and it works exceptionally well
I'm using it to brew extract kits as well as using on grain kits and it works great if you know what to do.
July 24, 2019
3 months ago
Excellent brewing system. Excellent service, mine was damaged in shipping and they sent me a new one right away no questions asked with a label to ship the damaged one back
Loving my robobrew. So much easier than current system and getting way better efficiency
Loving my robobrew. So much easier than current system and getting way better efficiency
June 29, 2019
3 months ago
Great system
I was hesitant to get into all grain brewing. With the heat down here in Florida I didn't want to use a gas system. I'm totally satisfied with this electric system. It's well designed and made. It's easy to use And my first batch turned out better than any of my 26 extract batches.
June 24, 2019
4 months ago
Great Brewing System
I bought this when I transitioned over to all grain brewing. This system is great.
Can do step mashing without much effort

programmable so you are ready to brew when you get home from work or wake up.

Circulating pump great for keeping an even temp and transferring the beer to the carboy

Price you basically get a grain father minus the counter flow chiller and the fancy wifi controller

Chiller: Most people don't like this chiller while it is not the best it does do the job and for the price you really can't complain. I run ice water through the chiller, the first 5 gallons of the hottest water I save for cleaning later. After that I continuously recirculate ice water and am able to cool in 30-40 min.

The controller location is awkward and forces you to bend down constantly to see the temp or work on a counter making it difficult to pull out the malt pipe.

Heat up time, I got the 110V version because I couldn't get 220V in my brew room without a lot of work. I new this would be a problem going in so I bought the neoprene sleeve to help
June 4, 2019
6 months ago
great system
very compact system works very well. first unit had controller issues more beer replaced it no hassle at all got new one back in less than a week. new one appears to be made a little heavier as far as electrical part are concerned. very happy with new unit and customer service is second to none.
May 31, 2019
1 year ago
Game Changer
I purchased this robobrew so I could do all-grain with less equipment, and to experiment more with different recipes. It's a huge game changer from my gravity system because I can set it to warm the mash water before I get off work and then start brewing ASAP. The first beer I made in the RoboBrew was a Scotch Ale with a 17 lbs grain bill. I had an efficiency of 90% using this system (which I think is great).
I'm already thinking about buying another on to double my experimentation rate.
Boil with the hop spider
May 7, 2019
5 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
May 8, 2019
Tyler W Staff