Logo
 
MoreBeer!
  1. Home
  2. BEER
  3. Beer Bottling & Kegging
  4. Kegging Homebrew
  5. Corny Kegs & Homebrew Kegs
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
B283
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
 

KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L

Quantity Price
1+ $10.99
2+ $10.45
4+ $9.90
8+ $9.35
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description
  • Oxebar Mono is a lightweight 2-gallon keg with high oxygen barrier properties compared to standard PET plastic
  • Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go
  • Lighter than traditional glass growlers. Easier and safer to transport
  • Made from Nylon impregnated PET for superior oxygen barrier
  • Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used
  • Lower total oxygen pickup compared to a standard corny keg lid seal

This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg.

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months.

Dimensions:

  • Diameter: 6.1" (155 mm)
  • Height: 20.5" (520 mm)
  • Pressure Rating: 58 psi (4 BAR)
  • Temperature Rating: 113°F (45°C)

KegLand Part Number: KL22347

Item # B283
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.34 LBS
Customers Also Purchased

Pluto | Beverage Gun | Hand Held Beer Faucet | Stainless | Black Nylon
$14.99

Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
$2.49

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve
$3.49

Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Red Plastic
$7.99

Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight
$17.29

Carbonation Cap Tee Fitting | Ball Lock Quick Disconnect (QD) Cap Tee
$3.99

KegLand Core 360 Mini CO2 Regulator | Interchangeable Gas Outlet | Swappable Pressure Gauge | SodaStream Compatible
$79.99

Duotight Compatible | Hand Held Beer Faucet | Cobra Tap | Picnic Tap | Black Plastic
$5.99

Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Yellow Plastic
$7.99

Ball Lock Line Cleaning Kit w/ Mini Party Pump
$12.99

EVABarrier Beer Line Assembly - Ball Lock Quick Disconnect (QD)
$17.99

Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow
$1.99

Duotight Flow Control Ball Lock Quick Disconnect (QD) | Beverage Out | Adjustable flow rate | 8 mm Duotight
$14.99

KegLand Oxebar Mono PET Keg | Ball Lock Adapter Tapping Head
$19.99

Replacement PCO38 Tapping Head
$6.99

Replacement Silicone Elbow for PCO38 Tapping Head
$1.99

PCO1881 Pressure Relief Valve Cap
$3.99

Red PRV 1881 Cap Combo (35 psi)
$10.99

Duotight Ball Lock QD Gas In | Quick Disconnect Gas In Push-In Fitting
From $7.99 to $7.99

Duotight Ball Lock QD Beverage Out | Quick Disconnect Bev Out Push-In Fitting
From $7.99 to $7.99

KegLand Deluxe Sodastream Cylinder Adapter w/ Pin Adjustment | CGA320 Male Thread x TR21-4 Female Thread | KL24662
$29.99

Duotight BlowTie 2 | Complete Kit | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight | Duotight Ball Lock Quick Disconnect (QD)
$25.99

Rigid Plastic Joiner for Duotight Fittings - 8 mm
From $0.89 to $3.99

KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 1 Gallon | 4L
$8.99

You Might Also Need
Community Q&A
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 33 answers
Why did you choose this?
MoreFlavor Store
Looking for an inexpensive way to keg smaller batches and take them to friends' houses. Heard a espisode on Brulosophy and seemed like the right fit for me..
Paul K on Mar 2, 2023
light weight keg for parties, AND kombucha on tap
Graham H on Mar 1, 2023
Looking for an inexpensive way to keg smaller batches and take them to friends' houses. Heard a espisode on Brulosophy and seemed like the right fit for me..
Paul K on Mar 2, 2023
I have 8 now. I think I'd like & more
Tom m on Mar 2, 2023
light weight keg for parties, AND kombucha on tap
Graham H on Mar 1, 2023
Great for soda for the kids
Daniel J Teare on Feb 25, 2023
Need another one. They are wonderful.
Shaun J on Feb 24, 2023
Easier size for me to work with
Tom m on Feb 13, 2023
liked the first one
Daryl T on Feb 11, 2023
I can sure use these for small batch brewing of beers and wines
Keshwan N on Feb 11, 2023
Almost impossible to find the Kegland ones or any other alternatives in Canada and it's a very good solution for taking homebrew to parties or events without having to worry about bottles.
Andrew M on Feb 7, 2023
Looks like good kegging option
stephen w on Jan 31, 2023
David Heath
Colin L on Jan 18, 2023
David Heath
Colin L on Jan 18, 2023
beer storage, please get the PCO38 full set in soon.
Rob C P on Jan 5, 2023
My dad wants it
Sara Marie P on Dec 10, 2022
Looking for an easy way to transport some craft beer on holidays
Freddy Miguel Calero Veloz on Dec 5, 2022
Want something to travel with
Aaron F on Nov 27, 2022
CURIOUS ABOUT PET BOTTLES FOR MEAD TO PARTIES
SCOTT M on Oct 27, 2022
I like to be an early adopter
Matthew C on Oct 19, 2022
Trying it out
Brian P on Oct 11, 2022
for the little excess beer I ferment
Luis Trujillo Section 9 on Sep 27, 2022
I have 8 now. I think I'd like & more
Tom m on Mar 2, 2023
Great for soda for the kids
Daniel J Teare on Feb 25, 2023
Will you be getting the 5 Liter Oxebar in?
James Freese on Dec 7, 2023
I will want to only tap one of these at a time. The others I would fill and want to cap and pressurize under CO2. No liquid out nor PRV. Is there an adapter that screws on for gas in only?
DAVID J INGHAM on May 8, 2023
BEST ANSWER: If you really just want to store it, then put 1/4 cup of sugar and put the original cap back on. It’ll keep for 6 months. Or put 3 carb caps and only push in gas. Don’t try soda caps as a cheap alternative to the carb caps. Even with Teflon tape, they won’t hold. There is no adapter, just carb caps.
Could you force carbonate your Homebrew with this?
Mark Trahan on Jul 19, 2023
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
KegLand Oxebar Mono PET Keg | Ball Lock Adapter Tapping Head
KegLand Oxebar Mono PET Keg | Ball Lock Adapter Tapping Head
BEST ANSWER: I will add an extra comment that's needed per my experience, and needs to be addressed by kegland. I own three of these now, and they all leak when they are first assembled. always use plumbers tape to seal threads. IMO the only way to get it right the first time is shear luck of not over or under tightening. Once I used plumbers tape all leaks were fixed. So, yes it can be forced carbed but make sure it passes a a leak test prior to filling kegs
What CO2 gear do you need to go with this?
Steve Wilson on Apr 4, 2023
BEST ANSWER: Normal Cornelius kegging equipment-
CO2 tank, regulator, ball lock connectors, gas hose.

You also need the Oxebar adapter kit, which screws on the Oxebar, and includes the gas and liquid ball lock valves, dip tube and pressure release valve.
What would be the best way to carbonate in these kegs?
Damian Eby on Apr 26, 2023
BEST ANSWER: An easy way that I do it is to fill it with cold crashed beer leaving a small amout of head space and screw on a Ball Lock Adapter Tapping Head with the dip tube attached. Before yout tighten the tapping head, squeeze out all of the air to reduce you chance of oxidation. Then with the tapping head tightened, apply gas and carbonate the same way you would a corny keg. Pay careful attention to ensure that the cap is tight enough that there are no leaks. I have eight of these bottles and a few of them need a lot of torque before they stop leaking ans wasting my gas.
Does a regular 38mm growler cap fit on this keg?
Andrew Rae on Nov 28, 2022
Reviews
Powered by TurnTo
4.0 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
3
1
0
Rated 5 out of 5
Works great for me
Fits in my small fridge so no need to get a separate fridge. I generally just do my IPA's in it. I have two, ferment in one and then close transfer to the other for serving. Very cost effective and easier to handle than regular kegs.
December 1, 2023
Purchased
 1 year ago
Rated 2 out of 5
Wait For Leaking Problems to be Corrected
I've been brewing for over 40 years and I thought these would make a nice travel set up for picnics, camping and other event. Nothing but leaks. I went though 6 16g CO2 cartridges to push 2 gallons of beer. Tried everything to tighten, but still leaking. I'll do a bathtub test when I get home from this trip. But for now I have 2 gal of un carbonated beer. Until Kegland addresses this issue I would not recommend.
September 29, 2023
Rated 5 out of 5
Oxebar Beer Kegs For Homebrewing
The Oxebar Pet mini keg by Kegland really is the best and most cost effective. Small lightweight portable kegging system available. Easy to use and well made from high quality materials, It's definitely worth checking out.
August 28, 2023
Rated 5 out of 5
Affordable Keg
Works great, light, easy to store, affordable, skinny so you can fit several in a small space.
April 10, 2023
Purchased
 1 year ago
Rated 5 out of 5
Great product
I got 6 of these and works very well for what I wanted them for .
March 5, 2023
Purchased
 1 year ago
Rated 3 out of 5
A VERY NICE SOLUTION BUT
This is a very nice and affordable solution to keg you beer and take it with you. the only downside I find is that the wall of the bottle feels too thin and sometimes I feel afraid to brake it. otherwise is a good solution.
December 19, 2022
Purchased
 1 year ago
Rated 5 out of 5
Distorted bottle
Yea looking at the bottle Man you over heated it.
o more then 88F - 94FR on the solutions
Love more beer buy all the time but bought the kit from competitor just want set it straight on the bottle warpage
love these bottles
November 28, 2022
Rated 3 out of 5
Great way to start kegging/sharing.
I bought 4 (8L) kegs, and 4 of the "heads".. I have poured through 2 at this point.
Initial thoughts were:

Really "plastic" smell when opening. Did not seem to affect the beer. This seemed to dissipate after the first use.

Really fiddly heads that took a while to get them straight to not leak. Please check for leaks before leaving them alone.. Maybe gaskets would help? I don't like trying to over-tighten plastic.

I used them. I like:
The format/size. These fit great in small places, an be used sideways(with a check valve).

I can fit 3 inside the pancho keg cooler with a sodastream CO2 tank, so some selection to bring with is nice.

The price(maybe), at least I'm not out a ton if I leave them somewhere etc..

I dislike:
I don't always get as good a connection with the ball-lock connectors which seemed to result in "hammering" until I adjusted the connector or held it tight through the pour.

when cleaning them, do not try to empty if full by just turning them upside down, they collapse, and seems like that might be bad long-term. Live and learn I suppose (See picture)

The "feet" seem really dinged up. I don't feel I abused them. I do have concrete floors in my basement, but it goes beyond scratches into "dents" which again, seem like will be a wearing point over time. and it almost looks like where it dented there may be some separation between layers?

I don't feel comfortable cleaning as hot as stainless, fortunately Liquid PBW exists now.

I'm neutral on:
Not being able to get my hands inside to clean. This is somewhat offset by the ability to see the insides. I run a lot of standard sixtel kegs, so not too big a deal, as my normal keg-washer should work.

Over all, I think they are going to cost more than used stainless kegs, less than brand new ones. This depends on how long they last I suppose. Again, the format seems nice, and they are pretty portable, and with the flexible dip tube, can be loaded on their sides..

As an aside, I bought the "starter" kits. The individual bottle price seems to have gone down, while the tapping heads went up a little. This may make them a better long-term price if the kegs cost less.

As a second aside, after my initial review, MoreBeer reached out, Top notch customer support. I will continue to buy from them as the first stop(after my LHBS of course).
Creased after turning bottle that was full of cleaning solution upside down.
I didn't think I was too hard on them. This was a single use.
November 26, 2022
Rated 4 out of 5
Great concept, check for leaks!
Perfect fit in my keezer adding a 5th vessel. My first beverage is a G&T, kept at 30psi. I ended up with a leak. I really had to crank down on everything to get a leak free seal. They should provide gaskets for the 4 sealing points.
November 3, 2022
Purchased
 1 year ago
Rated 3 out of 5
Pretty cool, could be better
I was super stoked to find this product, I assumed it had a regular soda thread and I could use the carp cap tee for a cheaper setup, but it is a much larger size cap so you must purchase the 3 way ball lock/prv/dip tube setup for these to work.

I was excited to see this up and started with a pbw wash. When filling the bottle, the “feet” at the bottom quickly buckled under the weight of water and are somewhat indented. This was a pretty big bummer. The plastic is very thin, about as thick as a regular 2L bottle, possibly thinner?

I washed it and filled it back up with StarSan and then pressurized the bottle hoping the frets indentations would pop back out but they did not fully reform. There are still a bit of small dents, and I’m afraid after a few uses one of these dents will crack and start to leak.

So far though, no problem, I purged the keg, and attempted one last time to reform the feet with 30psi of pressure, sadly it did not help.

All and all, I’m stoked to have a cheap keg I can catch extra beer in or bring to the bbq, I wish the plastic was a bit thicker, or the bottoms feet were reinforced somehow.

Last thing to note, with the shape the feet make at the bottom, the filter at the end of the dip tube cannot get every last drop out. To fully get all the StarSan out of the purged bottle, I had to flip it upside down, and release the last couple oz through the PRV.
Size comparison
Dented feet
Dip tube can’t reach 100% or beer
User submitted image
Dented feet
October 14, 2022
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...