Logo
 

 

MoreBeer!
Nukatap® Counter Pressure Bottle Filler | Oxygen Purge Button | Telescopic Filling Stem | Slide-in-Faucet Design | Adapter for Direct Keg Connection | 8 mm Duotight
KEG915

Nukatap® Counter Pressure Bottle Filler | Oxygen Purge Button | Telescopic Filling Stem | Slide-in-Faucet Design | Adapter for Direct Keg Connection | 8 mm Duotight

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

  • Unbeatable value for a homebrew counter pressure bottle filler!
  • Fill bottles directly from your keg with virtually no CO2 loss
  • Purge oxygen from bottles before filling to preserve the quality of your beer
  • Accessory set included for multiple connection options — no expensive add-on items needed!
  • Duotight connections offer unparalleled customization and adaptability to your specific needs
  • Compatible with forward-sealing faucets — NukaTap, Intertap, Perlick 600-series and others

Running late but don't want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go.

This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle.

Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn't pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition

Includes:

  • All stainless steel counter pressure filler
  • Push-in spout compatible with forward-sealing faucets
  • (2) 8 mm Duotight adapters for filler and NukaTap spout
  • (2) Ball Lock Post Adapters (Red / Yellow)
  • 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

KegLand Part Number: KL21760

 

Item # KEG915
Shipping Eligible for Free Shipping Program
Availability West - In Stock
East - In Stock
Weight 0.93 LBS
Documents

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 27 answers
Why did you choose this?
MoreFlavor Store
Looks easier and bottles better quality beer.
James M on Feb 28, 2023
Because I purchased Nukatap faucets
richard d on Feb 2, 2023
Looks easier and bottles better quality beer.
James M on Feb 28, 2023
This paired with a forward sealing tap seems to be the easiest way to run a counter pressure bottle filler.
Eric R G on Feb 21, 2023
Because I purchased Nukatap faucets
richard d on Feb 2, 2023
accessories included to fit my system
Samuel F on Feb 1, 2023
son requested
Barbara S on Dec 13, 2022
I use DuoTight fittings and Ease of filling bottles
Ron S on Dec 9, 2022
To bottle gifts from the tap. This model includes accessories for the same price.
R E on Dec 7, 2022
Kegs need kegged. Bottles need bottled.
Bradley B on Nov 8, 2022
Exactly what I need for the occasional six pack to friends and family and perfect for bottling to send to competitions
Shuyler E on Oct 14, 2022
stout didn't carbonate in bottles naturally, have to carbonate in keg and then bottle
Daniel W on Sep 29, 2022
Watched the Kegland youtube video and it is exactly what I need
Carl B on Sep 19, 2022
Starting to bottle from kegs
Tom m on Aug 17, 2022
Good deal with all the accessories
DON S on Jul 21, 2022
Quick bottle filling
James T on Jul 14, 2022
I have Nukatap taps, so I assume this will work. Also it comes with the ball lock adapters.
Jason M on Jul 11, 2022
hopefully works better than the northern brewer one....
Logan H on Jun 6, 2022
Reduces foam in fill up and prevents oxidation
Nicolas L on May 31, 2022
one person bottle filling
Michael J on May 23, 2022
For competition
Ryan R on May 5, 2022
You Tube Video
Vincent van J on Apr 26, 2022
Want to make sure beer stays good longer when I fill from the keg.
Tom D on Apr 23, 2022
I have a Nukatap spout
John I on Mar 16, 2022
Price additional accessories
Todd on Mar 14, 2022
Well I once purchased a different one like this one, but this one includes everything that you need.
Kenneth S on Mar 12, 2022
Reviews were good and I need one
John W on Mar 9, 2022
Works seamlessly with my Nukatap faucets, mimics a commercial long tube filler operation, offers good control.
Harlan S Coomes on Mar 2, 2022
Good review from buyers
André P on Jan 31, 2022
Looks like a good bottle filling solution.
Scott R on Jan 27, 2022
Might finally allow me to fill bottles and growlers without too much foam and oxides
Menno van b on Jan 22, 2022
Prevent oxidation
Michael G on Jan 10, 2022
This paired with a forward sealing tap seems to be the easiest way to run a counter pressure bottle filler.
Eric R G on Feb 21, 2023
accessories included to fit my system
Samuel F on Feb 1, 2023
Will this work with Perlick 500 series taps? I know the Tapcooler has optional adapter for them.
Randy P on Apr 11, 2022
Where do I get the replacement spring for the co2 purge button?
Nathan F K on Aug 13, 2023
BEST ANSWER: I have never had to replace it and don’t see it specifically listed on the web site. I suggest giving them a call and letting them know what you need. The sales reps are always able to help and always have a solution anytime I give them a call.
When I attach the gas line it hisses continuously. Is it supposed to do that? I assumed it would only have gas going through it when I pushed the purge button. Just want to make sure mine isn’t defective.
Nicholas G on Jan 14, 2023
BEST ANSWER: It is not supposed to leak around the fitting or through the purge button. 1) If it's leaking around the fitting, ensure you have the correct setup. I use a ball-lock quick connect connected to the red gas fitting that is included in the box. You need to thread the duotite fitting into the filler, then insert the red fitting securely into the duotite fitting for a good seal. You don't want to be inserting/removing the tubing or red fitting in/out of the duotite fitting. 2) If it's leaking through the purge valve, ensure you have the gas line coming off the regulator at a reasonable pressure. you only need a few psi, since it is only purging the bottle. I use about 8-10 psi for good flow. If that doesn't fix it, there may be a piece of foreign material in the purge valve that needs to be removed to allow it to seal.
Is the unit submersible? Could a sanitizing technique be to submerse in Star San after rinsing?
James K on Jul 25, 2022
BEST ANSWER: I recommend disassembling the unit for cleaning after each use. Submerging it in Star San will not clean it effectively. It's quick and easy.
Step 1: Flush beer line and all exterior parts of filler with hot water
Step 2: Unscrew pressure relief valve and remove. Careful! Don't lose the spring!
Step 3: Rinse relief valve assembly and flush body and relief port with hot water
Step 4: Spray relief port, inside of body, and valve parts with Star San
Step 5: Reassemble and push Star San through beer line and don't rinse the line
Stpe 6: Cleaning complete
Is the top - the rubber part which goes over the bottle - big enough for 64oz growlers to seal properly?
Stephen R on Feb 14, 2023
BEST ANSWER: It does not fit on a 64oz screw-top growler. The seal lip contacts the edge of the top of the finish (where the lid seals). The seal is designed to fit tightly on a standard 26mm finish on a beer bottle.

I recommend filling a growler by first using the purge feature by extending the tube into the bottle and purging with CO2. Then my preference is to use a fairly large silicone hose (3/8" - 1/2" I.D.) slipped over the beer tap ( I use Nukataps) and pushed fully into the growler and fill directly from the beer tap, then cap on foam.
What do I need to use this for 12oz beer bottles?
Herman A on May 21, 2023
BEST ANSWER: The Co2 gas telescoping tube works for different size bottles, pull it all the way out to reach the bottom of the size bottle you're using. Connect to your Co2 source and press the button on top to flush oxygen out of the bottle, then start filling with beer. It takes some practice to balance pressure and flow. I put my bottles in a small pitcher to contain a possible spillover and making cleaning up easier.
Would this Work with the Nukatap Counter Pressure Bottle Filler?
Dann F on Sep 1, 2023
Nukatap® Counter Pressure Bottle Filler | Oxygen Purge Button | Telescopic Filling Stem | Slide-in-Faucet Design | Adapter for Direct Keg Connection | 8 mm Duotight
Nukatap® Counter Pressure Bottle Filler | Oxygen Purge Button | Telescopic Filling Stem | Slide-in-Faucet Design | Adapter for Direct Keg Connection | 8 mm Duotight
Tapcooler Beer Valve Keg Connector
Tapcooler Beer Valve Keg Connector
BEST ANSWER: I'm sure you can make it work, but it's probably an easier connection with the tapcooler counterpressure filler. If you already have the nukatap, go with duotight lines/fittings
How do I tell if this will fit my tap? Thx.
Chris T on Feb 2, 2022
BEST ANSWER: I use it with Nukatap forward sealant tap without problems. The set comes with Duotigh fitting that makes easy to connect to those kind of taps
Looks great but there is no manual or any other instructions in the box. Is there a link somewhere for the manual?
Jeff C on Oct 11, 2023
Reviews

4.3 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
1
1
0
Rated 5 out of 5
Compact and simple
Love it. Just keep the PSI under 10 psi or else the PRV will just remain open and it will fill too fast. But it's really awesome to be able to just push this straight into a Nukatap, purge, and fill without needing open the keezer. Love the simplicity of the design.
User submitted image
Added Mar 26, 2023
March 26, 2023
Purchased
1 year ago
Rated 4 out of 5
good bottle filler
good filler but it takes some getting used to takes a lot of force to hold down on some bottles to keep from leaking
December 15, 2022
Purchased
1 year ago
Rated 3 out of 5
It's a decent option for the cost. Pros: In connects and disconnects very easily. It has a good CO2 purge button. Cons: The pressure release valve is finicky, resulting in foam sooner or later. And no independent ability to shut off the liquid flow (you have to shut off at the tap/source). Also, it's size usually won't allow bottle filling by plugging filler directly into tap (requiring more tubing and tube cleaning). Lastly, the telescoping wand isn't long enough for many big bottle (and I suspect the expanding size of the wand causes more foaming). I wish they sold separate screw-on solid wand sizes.

Overall, it's decent. Just not as great (or hassle free) as I hoped n
November 27, 2022
Rated 5 out of 5
Get rid of the siphon and bottle from the keg!
This little handy dandy guy has been useful thus far in my home brew set up. I typically just pour from the tap, but if I’m going out of town and want to bring a case of beer with, I just prepare bottles and pull it right from the tap. A “T” duo-tight fitting, a few ball lock QD’s, some evabarrier 4mm ID line coming from the c02 and going to my counter pressure bottle filler AND the keg itself is all you need, the rest comes with the filler.
November 15, 2022
Purchased
1 year ago
Rated 5 out of 5
Works great for its intended purpose.
Good product. Works great to fill a few bottles. I wouldn’t use for a whole batch.
July 25, 2022
Purchased
over 2 years ago
Rated 5 out of 5
Nice bottle filler
Used to fill bottles from a snake keg to swing top grolsch bottles for giving away and parties.
It works really well but you have to keep quite firm pressure on the top to stop it lifting and spraying beer all over the place.
So, when filling a good amount of bottles you can get hand ache! But its still worth it - nice bottle filler.
June 17, 2022
Purchased
over 2 years ago
Rated 2 out of 5
A little disappointed
I’m a little disappointed. I was hoping to have a solution to quickly fill bottles without having to haul out my full Blichmann beer gun setup. I cannot get this to full without foam for the upper 1/2 of the bottle. I had such high hopes because it seems high quality with more connection options which would cover almost every setup. Maybe it’s user error but I’ve spent hours troubleshooting and wasted about 2 gallons of beer along the way.
April 16, 2022
Purchased
over 2 years ago
Rated 5 out of 5
Great quality with everything in the box
Great value as it includes all the needed connections in the box. Easy to connect to my tap and worked perfectly on my bottles and 64oz growler
Package
Device and connectors
March 29, 2022
Purchased
over 2 years ago
Rated 5 out of 5
Best options good price
Best simple to used counter pressure bottle filler
Great quality and features. Best part comes with several connection options included
February 10, 2022
Purchased
over 2 years ago