Motorized Mighty Mill | 3 Roller Grain Mill | Heavy Duty Gear Reduction Motor | Stainless Steel Knurled Rollers | Adjustable Gap Setting | 7 lb Hopper Capacity | Welded Stainless Steel Stand | Grain Bucket w/ Handle

Motorized Mighty Mill | 3 Roller Grain Mill | Heavy Duty Gear Reduction Motor | Stainless Steel Knurled Rollers | Adjustable Gap Setting | 7 lb Hopper Capacity | Welded Stainless Steel Stand | Grain Bucket w/ Handle

Item currently out of stock

  • Mill your own grains on brew day for increased freshness and higher efficiency!
  • The Motorized Mighty Mill will make quick work of your grain at 6 lbs / minute so you can get your brew day started in no time!
  • Durable polypropylene base board is fastened to a welded stainless stand that sits just above the included bucket to keep grain dust contained
  • Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts
  • Gap settings are etched into the mill body for easy reference
  • 304 stainless steel knurled rollers efficiently pull grain through while leaving hull intact to form an excellent filter bed for sparging
  • 3 roller mills are more effective at cracking the husk of the grain and offer better crushing performance in a single pass
  • 2 driven rollers further improve performance as both top rollers grab grain and pull it into the gap
  • Comes with metal base featuring guides on both sides to help secure the mill when placed over a bucket

Upgrade your home brewery with a complete, fully motorized malt mill that crushed 6 lbs a minute! Freshness matters and nothing is as fresh as milling grains the day they will be mashed. The Mighty Mill makes it easy with its built-in heavy-duty drive motor. Turn the mill on, load your malted grains in the hopper, and enjoy the action and aroma of milling your own malt.

The Mighty Mill will be a superhero in your brewery while still being one of the most afordable full grain mill setups. Featuring 304 stainless steel knurled rollers, 7-pound aluminum hopper, with base board and mounting hardware included. The adjustable rollers can be set in a gap range from 0.025" to 0.1", allowing you to fine tune your crush based on the grain and personal preference.

The super convenient stainless stand with highly durable polypropylene base board allows for a collection bucket to be slid directly underneath. The precise fit between the bucket and stand is designed to contain grain dust. The bucket features a handle for easily pouring malt into your mash tun and will hold up to 25 lbs of milled grain. 

The Mighty Mill utilizes stainless steel rollers for longevity. The gap can be adjusted on both ends for an even crack. The drive is a heavy-duty motor with gear reduction that has plenty of torque for start-up.



  • Fully motorized with heavy-duty gear reduction motor
  • 3 Roller Mighty Mill with 7 lb hopper
  • Mills 6 lbs per minute
  • Easy 5-minute assembly
  • Durable PPE baseboard
  • Stainless steel frame
  • Included grain bucket with handle for easy pouring
  • 304 knurled stainless steel rollers
  • Adjustable gap setting from 0.025" to 0.1"

Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.


Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
Do you know the dimensions of the table?
Keith A Green on Aug 12, 2023

2.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 2 out of 5
Needs a better motor
My mini-drill outpaces this motor. Took me 1 hour to mill an entire grain bill. The torque on this motor couldn't help but getting stuck (even at the widest gap setting) if you add any more than just a handful of grain into the hopper. Considering returning the mill altogether. Especially at the price point, and the competition is shown to be much better.
September 23, 2023
Response from MoreFlavor
Thank you for your review. We believe that you received a bad motor with your mill. Our latest shipment contained a couple of bad apples that snuck past us. We now have more stringent pre-shipment testing procedures in place and can trust that if we replace your motor your mill will start working as well as we hope.

Please reach out to our customer service team, and we will be happy to help you out!
October 13, 2023
Malcolm Lieban