MKII High Temp Magnetic Drive Pump

MKII High Temp Magnetic Drive Pump

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade polysulfone. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orienations. An optional stainless head, PMP501, can also be purchased.  


  • 110v/60hz
  • Max Head: 11.15 ft. (3.4 m)
  • Max Flow: 5 Gal/min (19L/min) 
  • 1/2 inch fittings
  • Rotatable pump head
  • Max temperature - 248 F/ 120 C
  • Water resistant (not proof!) casing
California Recipients: See Proposition 65 Information
Item # PMP500
Shipping Eligible for Free Shipping Program
Availability California - Out Of Stock
Pennsylvania - In Stock
Weight 4LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 66 answers
Why did you choose this?
MoreFlavor Store
Need a second pump
Richard S on Sep 19, 2019
Kary P on Sep 19, 2019
Need a second pump
Richard S on Sep 19, 2019
Better than my chugger pump
Scott G on Sep 19, 2019
Kary P on Sep 19, 2019
Good price and included a free stainless pump head
Joseph F on Sep 18, 2019
stainless head promotion
Jose A on Sep 18, 2019
Great deal with free SS pump head upgrade.
Tim Gavigan on Sep 18, 2019
Has threaded inlet and outlet. Low cost.
Sean J on Sep 17, 2019
Good price
JIM T on Sep 17, 2019
Email promo
Eric G on Sep 17, 2019
Great Price
Bryan T on Sep 17, 2019
Good price for a good pump
Ron L on Sep 17, 2019
Appears to be a quality budget pump. The free stainless-steel head helped...
Kolin M on Sep 17, 2019
Wort transfer
Curt Faust on Sep 16, 2019
Special offer
Dave C on Sep 16, 2019
promotional email
Jeffrey L on Sep 16, 2019
a good starter pump
Tom Y on Sep 16, 2019
Ron C on Sep 16, 2019
free steel head
James A W on Sep 16, 2019
High temp abs so head
Tom N on Sep 16, 2019
Need to push 10 gal. of beer
Chuck Edenburn on Sep 14, 2019
I'm having problems with my other pumps.
Kenneth S on Sep 14, 2019
Good inexpensive pump
Cep on Sep 14, 2019
Good reviews comes with a free steel pump head
Tom on Sep 7, 2019
Good value - intend to use on a rims system
James K on Sep 7, 2019
To recirculate wort
David B C on Aug 28, 2019
Decided it's time to get a pump to easily transfer mash and wort.
Eddie M on Aug 28, 2019
Mag Drive at a fair price
Richard A on Aug 28, 2019
Switching to pump and plate chiller rather than immersion chilling
Eric Waters on Jul 1, 2019
Need a good pump for transferring my wort though my chiller and to the fermenter.
Jason G on Jun 24, 2019
David St. P on Jun 5, 2019
Richard Hencken on May 4, 2019
Ken Davenport on May 4, 2019
Building a full mash set up
Benjamin Kirkland on May 1, 2019
Best price for best utility
Bret B on Apr 15, 2019
Good Reviews
Mark J on Apr 9, 2019
Jim K on Mar 21, 2019
International P on Mar 8, 2019
good online reviews
Jerry G on Feb 22, 2019
For pumping while cleaning
Richard S on Feb 5, 2019
Affordable first pump!
to recirculate water in mash tun when boosting temp.
John M on Jan 24, 2019
Matthew M on Jan 3, 2019
Brian F on Dec 15, 2018
Great price
Dimitri K on Dec 13, 2018
Great price found on Reddit.
Michael F on Nov 30, 2018
Speeds up transferring wort, making the brew day that much faster
Sean W on Nov 24, 2018
No more handling of hot water for me!
Mel I on Nov 17, 2018
From my research it appears to be a good, affordable brew pump
Michael S on Nov 17, 2018
price and reviews
adrian p on Nov 17, 2018
Highly rated by experienced brewers
Darrell B on Oct 16, 2018
Better than my chugger pump
Scott G on Sep 19, 2019
Good price and included a free stainless pump head
Joseph F on Sep 18, 2019
Is this powerful enough to whirlpool 5-6 gallons?
Chris Germain on Jun 8, 2018
BEST ANSWER: How vigorous do you want the whirlpool? It is not a vortex but it works. I use it for 15 gallons. Wish it was stronger but it works
Has this pump in 220v?
Lucas Elias Montibeller on Feb 5, 2018
BEST ANSWER: Unfortunately, we only stock the 110v version of this pump.
Does this pump require I port my kettle? Will it be too difficult to prime without the port?
Brad Stein on Jun 30, 2018
BEST ANSWER: Hello Brad - It is highly recommend to have a bulkhead with shut-off valves on your kettle any time using a pump. The dangers of manually priming and or using a pump around boiling liquids are far too great.
Here is what I want to do, ideas?
Submerge an immersion chiller coil into a cooler of ice water.
Outlet on BK, goes to this pump, then to chiller, then back to BK to create whirlpool.
Is this pump strong enough?
If so, it would both chill and whirlpool with one pump and line!
Steve provoncha on Apr 28, 2019
BEST ANSWER: Hi Steve, that pump should do just fine in that situation. Be sure you do a thorough cleaning and sanitizing of the inside of your immersion chiller first. Would recommend that you install high temp hoses on your chiller, most just come with standard hose since the normal use would be to run cold water through the inside.
Can I use this pump with oil instead of water or beer? Thank you!
Catherine Forest-Nault on Mar 3, 2019
BEST ANSWER: I do not see why not but remember this is not a self priming pump. Also, depending on the oil they will be thicker. It’s a very beefy pump so it will push the liquids. The head is a “o” ring and the magnetic drive is powerful as far as pumps go.
Is there a spec sheet I can view for this pump? Preferably the pump curve for this pump?
Vinward on Sep 18, 2019

4.4 / 5.0
23 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works Good, nice size.
I used it to upgrade my Mash-n-Boil, really helps with temp control.

Then for sparging, I'm putting my hot sparge water into my to be used fermenator (Conical or SS bucket) and pumping up to the top with an added hose. The lid has a right angle barb to a simple plastic Siphon Spray Wort Aerator/Jet Fly Sparge. Might upgrade that part later, but have done 2 batches like this so far and works great.

Much more fun then going up and down the latter to sparge.
User submitted image
User submitted image
June 26, 2019
3 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
July 2, 2019
Tyler W Staff
Excellent pump.
Excellent pump. Very quiet, light weight and works great. I highly recommend it.
May 4, 2019
5 months ago
Great, quiet little pump!
This pump is amazing! I use it to recirculate mash since now I do full volume mashes and I was getting cold spots. Not anymore!! I boosted my efficiency 20%! I wasn’t expecting much flow but I had to slow it down quite a bit. And it’s super quiet!! I didn’t know it was on until wort started flowing! The Prius of pumps!
It would be nice if it came with the SS head as an upgrade option, not a separate item. Now I have a polysulphone head I don’t need. It’s not quite sturdy enough to support my ball valve without tipping forward, which I’m not sure if that is common for pumps as this is my first. If you mounted it this wouldn’t be a problem. Also an on/off switch would be clutch but no worries. Definitely worth the buy.
Recirculating water
Holding the back end to prevent it tipping forward
April 4, 2019
6 months ago
Response from MoreFlavor
Thank you so much for your detailed feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
April 5, 2019
Tyler W Staff
Great pump
This pump and head has made transfer of wart easy. Mounted on aluminum plate and added switch with incinerator light. The pump runs very quit so the incinerator light is a big help. Always us a GFI Beer and electricity only mix when watching TV.
MK II pump and S.S. head
MK II pump and S.S. head
February 4, 2019
8 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
February 5, 2019
Tyler W Staff
great little pump
Perfect sparge pump. Use in place of chuggar or march.
January 28, 2019
1 year ago
An excelent product, I'm very happy with the experience
January 8, 2019
9 months ago
Great pump! replace the head
This would get 5 stars if you didn't need to upgrade the head to the stainless steel model. The plastic head does not thread properly and broke off even with a little bit of torque to put fittings on it. The pump works great and is very quiet.
December 8, 2018
10 months ago
Very happy
Pump works great, only reason I didn't give it 5 stars is I had to order the upgraded housing, based on other reviews the plastic one breaks easily and I didn't want to risk it. They need the option to just get it with the steel housing instead of swapping it out.
December 2, 2018
10 months ago
BSP vs NTS threads
I would rate it higher but the manufacturer insists on shipping it with BSP (British) threads, which won't seal properly when used with NTS (North American) fittings, used by the entire North American brewing industry. The fix is simple: Change out the head for one with NTS threads.
I contacted the Australian manufacturer and he was clear about not using NTS fittings, as they would leak and damage the threads, but the supplier insists it's OK – just put lots of tape on the threads.
Mickey Mouse solution.
November 6, 2018
11 months ago
Quiet and functional, but a bit weak
Using this for whirlpool & chilling with CFC. Seems more wet resistant than other pumps, but the flow is just barely adequate for me.
August 27, 2018
1 year ago