Logo
 
MoreBeer!
Mighty Mill 2 Roller Grain Mill | Stainless Steel Knurled Rollers | Adjustable Gap Setting | 7 lb Hopper Capacity | Metal Base Included
MILL352

Mighty Mill 2 Roller Grain Mill | Stainless Steel Knurled Rollers | Adjustable Gap Setting | 7 lb Hopper Capacity | Metal Base Included

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

  • Mill your own grains on brew day for increased freshness and higher efficiency!
  • Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts
  • Gap settings are etched into the mill body for easy reference
  • 304 stainless steel knurled rollers efficiently pull grain through while leaving hull intact to form an excellent filter bed for sparging
  • 2 roller mills are great "first mills" for homebrewers expanding their brew kit. Economical and gets the job done!
  • Included crank handle can be detached to power the driven roller with an electric drill or motor
  • Comes with metal base featuring guides on both sides to help secure the mill when placed over a bucket

Milling trouble never hangs around when it hears this Mighty sound! The Mighty Mill will be a superhero in your brewery while still being one of the most affordable full grain mill setups. Featuring 304 stainless steel knurled rollers, 7-pound aluminum hopper, with base board and mounting hardware included. Easily operate via the crank handle, or remove the crank and rotate the driven roller with an electric drill. The adjustable rollers can be set in a gap range from 0.025" to 0.1", allowing you to fine tune your crush based on the grain and personal preference.

  • 7 lb aluminum hopper
  • Smooth grip crank handle
  • Adaptable for use with power drill
  • 304 knurled steel rollers
  • Adjustable gap setting from 0.025" to 0.1"
  • Metal base board sits comfortably on 5- or 6.5-gallon plastic buckets

Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

 

Item # MILL352
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 10 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
Why did you choose this?
MoreFlavor Store
Good reviews, metal base.
Chris R on Feb 24, 2023
I don’t have one yet and its affordable
Jonathan L on Dec 5, 2022
Good reviews, metal base.
Chris R on Feb 24, 2023
Affordable and good reviews
William George on Dec 20, 2022
I don’t have one yet and its affordable
Jonathan L on Dec 5, 2022
metal base plate sold me
Peyton B on Nov 28, 2022
good price for its features
I believe my 20 year old grain mill has done its duty...this one seemed to be the most cost effective and with good reviews.
Anthony L on Aug 9, 2022
fits my bucket and good reviews for a basic 2 roller mill
Kevin Anthony B on Jul 28, 2022
Seems like a fair deal on a 2 roller mill.
Bryan C on Jun 23, 2022
to crush grain
jim on Jun 17, 2022
to improve brew house efficiency
Rich D on May 27, 2022
I chose this so I could start milling my own grains.
Brian B on May 12, 2022
great word of mouth recommendations
michael w on Apr 28, 2022
Try mill my own grain
Ronald R on Apr 12, 2022
reviews
milt d on Mar 24, 2022
Good reviews and low price
Chris H on Mar 23, 2022
Cost and quality
Good recommendation, like the metal base idea.
Michael Hudson on Feb 8, 2022
construction and materials
Dereck G on Jan 22, 2022
cheapest with base board
John B on Dec 31, 2021
Need a mill for all grain
Patrick M on Dec 24, 2021
Price, adjustable settings
David on Dec 11, 2021
Cost and reviews
Scott Neils on Dec 10, 2021
PRICE
Thomas on Nov 29, 2021
For home brewing
Rene R on Nov 22, 2021
Price and features
Charles J B on Nov 3, 2021
Getting into all grain brewing.
Kyle M on Oct 30, 2021
Gift
Karla H on Oct 29, 2021
Seems a good way to start
Charlie on Oct 15, 2021
compair prices vs other brands
Paul W on Apr 13, 2021
Mill adjustment markings and seems like good quality.
Chad Chyreck on Apr 1, 2021
Need a mill and I didn't want to break the bank.
Brian W on Mar 18, 2021
price!
john k on Mar 9, 2021
Affordable and good reviews
William George on Dec 20, 2022
metal base plate sold me
Peyton B on Nov 28, 2022
are the shafts supported by ball bearings or bushings?
Ethan Verburg on Sep 29, 2021
BEST ANSWER: Bushings
I just received my 2 roller mill. Is only one roller supposed to move when you turn the handle?
Adrian Northam on Mar 31, 2023
BEST ANSWER: Yes. Once the grain starts going through both rollers will turn. If it were a three roller two rollers would turn. If you have a drill take the handle off and chuck the drill onto it. Works much better and faster.
Reviews

4.2 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
3
1
0
2
Rated 1 out of 5
This thing is absolute trash!!!
November 11, 2023
Rated 1 out of 5
Very Disappointed
This is not my first mill but I wanted a smaller more portable one so I waited until this was on sale and bought it. This thing is bad enough that it makes me not want to brew...I noticed when I got it that the settings were far enough off from either side that you could see it by eye and the drive roller was not concentric. I figured I could set it with a gauge and not worry about it. Finally got around to using it today and I got languaged by my kids. A lot. I absolutely can not get this thing to feed unless I open it so far that 1/2 my grain isn't crushed. If I close it far enough to crush grain, it won't feed unless I bang it up and down on my bucket. Took me 20 minutes to get 10 lbs of grain crushed. Now I'm a few days out of the return window....I feel like this thing is a total waste of money.
August 5, 2023
Rated 3 out of 5
A little disappointed in the quality
The first thing I noticed out of the shipping container is that the knurled portion of the driven roller is not concentric with the end shafts. When I spin the driven roller, the roll end nearest the drive shaft moves from .026" gap to a .016" gap (.010" variation, or TIR for the machinists out there). I know this is a fairly low cost mill, but I would have expected a little better quality than this.
Just received the mill today, so I have not use it yet. Not sure how this defect will impact performance.
February 17, 2023
Purchased
1 year ago
Response from MoreFlavor
So sorry to hear about your experience. Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. We try very hard to create the best experience for our customers and provide quality products. For any questions or concerns you can reach out to our customer service team by scrolling to the bottom, right-side of our web page and following the appropriate link. We are here to help. Cheers!
February 23, 2023
Lizzy
Rated 5 out of 5
First time using the grain mill was great. Easy to set up and crushed the grain as expected! Better results than buying crushed grain from supplier
Mighty Mill 2 roller worked great!
July 11, 2022
Purchased
1 year ago
Rated 5 out of 5
Very happy
I've milled up about 50lbs of grains with this so far and it's worked perfectly. it's very easy to adjust and works great with a drill.
June 30, 2022
Purchased
1 year ago
Rated 4 out of 5
its a working mill
my first run was not that good, it would not feed the grain to the rollers, my advice is once you get it assembled push the flats next to the rollors as far as you can to widen the gap, mine are just missing the rollers
after doing this i have done a few more batches and had no issues at all, i would recommend after bending the flaps by the rollors
June 11, 2022
Purchased
1 year ago
Rated 5 out of 5
It has worked as advertised for my first brew.
April 25, 2022
Purchased
1 year ago
Rated 4 out of 5
Works really well
While the grain doesn't all feed down in it's own (I have to move it around for it to fall into the rollers on occasion), overall this mills the grain well and improved the effeciency of my mash. No reason for complaint at this price point.
February 7, 2022
Purchased
over 2 years ago
Rated 5 out of 5
heavy duty metal base
I choose this mill over the others because I like the metal base that it has rather than the wood or composite material that others have. The base is a nice solid gage metal. I have only milled up about 10 lbs so far and it seems to work well. If you can catch it on sale its a little less expensive than some of the others also.
December 27, 2021
Purchased
over 2 years ago
Rated 5 out of 5
Great first mill, especially for the price
Pros:
Great first mill, especially for the price. Love the adjustable feature with easy gap markings since I use various thickness of grain combinations. I adjust for varying grain thickness. For example, I crush fat Maris Otter and thin wheat differently but just crack the husk without destroying too many of the hulls.
Cons:
1) The settings often drift due to screw tensioning loosening so you will need to look at the dials every 5 minutes or so. Or if you ever want to set just one specific gap, semi-perm blue locktight on adjustment screw will work.
2) Hopper edges are super sharp and the hopper rubber gasket protection falls off and stays off, so you will want to find a way to glue the gasket on.
Worth somewhat more than the price.
December 24, 2021
Purchased
over 2 years ago