Malt Muncher 3 Roller Grain Mill

Malt Muncher 3 Roller Grain Mill

On Sale!
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

Mill your own grains for ultimate freshness with the Malt Muncher three roller grain mill.  Includes a 12 lb hopper, adjustable rollers, and hand crank. The handle can be removed to use the mill with a drill. The MaltMuncher is backed by a one year warranty and is built to last with rollers made from cold rolled steel.  The body and hopper is made from 6061 grade aluminum. The optional PPE base board is much stronger than comparable particle board or plywood bases and makes for a secure platform to set on a bucket.

Do you love to make your own equipment?  Make an amazing motorized mill with the optional MaltMuncher high torque motor  designed to work with the Maltmuncher 3 roller grain mills.  


  • Comes with 12 lb hopper and crank handle
  • Great for use with a power drill
  • Cold rolled steel rollers sized at 5" long by 1.25" diameter
  • Adjustable rollers at both ends to move the gap from 0" - 0.063"
  • If motorized we recommend 200 rpm
  • 12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge
  • 12 mm crank shaft

Kegland Part Number: KL03261

Item # MILL710
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 12 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 67 answers
Why did you choose this?
MoreFlavor Store
Son is doing micro brewing
susan a on Dec 7, 2021
upgrade grain mill size
Tim P on Nov 18, 2021
Son is doing micro brewing
susan a on Dec 7, 2021
I wanted to upgrade from a 2 roller mill to a 3 roller.
Kraig P on Nov 23, 2021
upgrade grain mill size
Tim P on Nov 18, 2021
Great "Deal of the Day" I will be able to grind grains when I need them and to my satisfaction.
Bill Brennan on Sep 17, 2021
Recommended based on reviews
Bill W on Sep 15, 2021
Good review of product on another site, prefer 3 roller system, best price here
524 Union S on Jul 14, 2021
Price and reviews
Kenny C on Jul 14, 2021
My homebrew shops’ mill is not adjustable and I want more efficiency for my BIAB set up
John F on Jun 29, 2021
For best grind yield...
Carmen De N on Jun 7, 2021
Want to start self milling for ultimate freshness
Walter M on Apr 3, 2021
Mathew C on Mar 16, 2021
Better control
Merlin J Foard on Mar 12, 2021
It was the best price for the item. Didn't have any promo codes at the time but what can ya do?
Neil F on Feb 15, 2021
To match the motor
Christopher I on Jan 21, 2021
I will be starting to mill my own grain, instead of relying on the brew shop to grain
Patrick W on Jan 15, 2021
Quality and consistency of grind
Michael E on Jan 15, 2021
Ordered for a Christmas Present for our son's home brewery.
Diane K on Jan 14, 2021
Bought this for my husband for Christmas
Anjelica M on Dec 2, 2020
3 roller action baby!!!
stephen h on Dec 1, 2020
sold my old one when we moved
David P on Dec 1, 2020
Upgrade from a tabletop mill.
Randall C on Nov 30, 2020
Requested by recipient
Terry C on Nov 30, 2020
Good Reviews
Idalmis Reyes on Nov 28, 2020
3rd roller for more consistent milling
Dave on Nov 28, 2020
Amazing Black Friday deal!!!
John G on Nov 28, 2020
high review marks, construction and operation details, overall look
Tim U on Nov 26, 2020
Mrs. Rita T on Nov 26, 2020
need one and chose this
prof p on Nov 18, 2020
I wanted a grain mill and have read the 3 roller ones are better. This one was recommended.
Nickolas S on Nov 5, 2020
For quality malt sparging
Aaron A on Oct 27, 2020
It had the best reviews for the price, and seems like a machine that will last for many years!
Federico B on Oct 24, 2020
recommendation from a friend
Bruce K on Oct 20, 2020
I want to start milling my own grains.
Micky B. on Sep 26, 2020
Recommended by Brew club
Matthew S C on Sep 14, 2020
brian w on Aug 27, 2020
Tired of inconsistent LHBS crushes
Gregory S on Aug 26, 2020
3 rollers is better than 2
David F on Aug 25, 2020
Upgrade after old 2 roller mill wore out
joan N on Aug 17, 2020
Looks like quality product
James H on Aug 11, 2020
Well reviewed by a trusted source.
Jonathan B on Jul 31, 2020
Wanted to control the gap settings of my mill
Dedrick M on Jul 24, 2020
Good value, mostly positive reviews
J E on Jul 22, 2020
To process my own grains for cheaper brewing.
Brandon M on Jul 20, 2020
It uses bearings instead of bushings
Tom on Jun 18, 2020
to mill grain
William T on Jun 12, 2020
Buy once, cry once
John D on Jun 5, 2020
looked like it was a good quality mill
Hunter I on May 21, 2020
The 3 rollers, solid build, and great reviews
William K on May 21, 2020
I wanted a 3 roller mill to start grinding my own grain. This one got good reviews and looked like a good one for the price. Hope I'm not disappointed.
Dave G on May 17, 2020
Have had poorly milled grain in the past
Michael V on May 16, 2020
I wanted to upgrade from a 2 roller mill to a 3 roller.
Kraig P on Nov 23, 2021
Great "Deal of the Day" I will be able to grind grains when I need them and to my satisfaction.
Bill Brennan on Sep 17, 2021
Can anyone confirm if this model has ball bearings or if it has bronze bushings?
Joel Donmeyer on Dec 26, 2019
BEST ANSWER: looks like ball bearings
Does anyone have directions on setting the roller gaps?
Wayne Halozan on Jan 5, 2020
BEST ANSWER: I use the .036” setting, which is slightly smaller than 1mm. This setting gives me a nice grain crush with overall good efficiency and no problems with a stuck sparge at this setting.
Can grain be finely crushed with this mill, like flour?
Stefan Mueller on Jan 8, 2021
BEST ANSWER: No. BUt you can get a nice fine crush, about.025", or credit card width, .030. Perfect for my use. What a great mill, never will I go back to a two roller mill.
What are the vertical dimensions with the hopper attached?
Aaron Nicodemi on Mar 29, 2020
BEST ANSWER: Mounted to a 1/2 inch base, vertical height is 13 1/2” with the standard hopper and 23” with the extended hopper.
What size drill is needed?
Lenny N on Jan 14, 2020
BEST ANSWER: 1/2 " chuck - variable or low speed is recommended. Anchor down this mill very well when motorizing - the 1/2" drill has a lot of torque and could rotate the whole mill (rather than the rollers). Before motorizing, hand crank it empty to make sure the rollers are aligned then add a few oz. of grain to check it again. Then use the drill.
What size bolts are required to mount the mill to the base?
Gerald Kroupa on Feb 25, 2021
BEST ANSWER: My unit is about 18 months old and assuming they haven't changed, they are metric M6 x 1.0 bolts. The 1.0 is the pitch not the length. The length will depend on how thick of a board you use. The threads are about 3/4 inch deep into the mill. My bolts were 30mm with a 1/2 inch board and I had to use a large nut as a spacer to keep the bolt from bottoming out before it was tight, but it was what I already had at available. Drilling the 4 holes in the exact place is made easier if you do a rubbing on the mill and use it as a template to drill the holes. Good luck.
Could someone be kind enough to check the roller dimensions on this mill? (I have seen both 5" x 1.25" and 6" x 1.5") Thanks
Mike Goetzke on Jan 20, 2021
BEST ANSWER: The rollers are 1.375" x 6" long. The thread count for the bolts are not widely available and I have not been able to locate bolts to fasten the rig to a base. I would not buy this again.
I currently have the motorized MaltMuncher 2-roller model, powered by a motor (item #MILL705). If I ever want to swap out the 2-roller mill for this 3-roller version, is it a direct replacement? Specifically, is the axle/shaft of the 3-roller version at the same height and extends the same length away from the body as the 2-roller?
Daniel Cook on Oct 29, 2019
BEST ANSWER: Daniel - I would guess the driver roller is the same height, but wouldn't be offset like the two roller.

4.4 / 5.0
49 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 4 out of 5
setup fail
Well first off this thing works great if you can get it put together with zero instructions and no instructions on how to adjust the thing. Also do not wait until your brew day to put it together. I had to run to the hardware store since it did not have the hardware to mount this to the surface that is sold separately. The small rubber gasket falls off very easily.
December 20, 2021
1 month ago
Rated 5 out of 5
works great easy to adjust
only complaint is there is no assembly instructions
August 4, 2021
6 months ago
Rated 5 out of 5
Game changer
I purchased this mill after years of frustration with my BC mill. The BC served me well for 10+ years, but the rollers wore down and it would anger me more than anything else. Enter this mill. Two words: Game Changer. This mill rips through grain. Assembly was easy despite the lack of instructions; most of it was common sense. Setting the mill gap took a bit to figure out, but once I realized how the cams move the adjustable roller it made sense. The .032 setting made for a perfect crush for my eBIAB rig. I would highly recommend this mill to anyone from novice to expert.
July 27, 2021
6 months ago
Rated 5 out of 5
Works as expected. Happy
June 17, 2021
7 months ago
Rated 5 out of 5
Great Mill
Great mill! Have used it 20 times already and mills like the first time used !!! Definitely worth the money !
May 25, 2021
1 year ago
Rated 5 out of 5
Great mill
Flawless mill. Set ur gap and set to work. Also got an efficiency boost over my 2 roller mill.
April 26, 2021
10 months ago
Rated 2 out of 5
Poor crush
I bought this ‘Keg Lamd Malt Muncher 3 roller mill because I am going with BIAB and wanted to be able to do a finer crush. The dial indicates a 0.032 setting, but this wasn’t really matching up with the feeler gauge and the dials didn’t match up with each other. Tried 0.025 but it locked up. Tried 0.035 and it still locked up. Worked around 0.040, but my efficiency ended up around 68%.
No instructions came with this, so really frustrating finding adequate UTube videos to figure out how adjust the rollers of this mill.
Returning this and going for a Monster Mill.
January 28, 2021
1 year ago
Rated 5 out of 5
Forever Changed My Brew Day
Milling my own grain has completely changed the way I brew. Having the ability buy bulk grain and brew anytime I want has elevated my game. This mill is easy to assemble and easy to adjust for different mill specs. Hooks right onto my 20v dwault cordless drill for super easy milling.
December 17, 2020
1 year ago
Rated 5 out of 5
Buy this one!
Buy this one for the best grind. Cant beat the price.
October 30, 2020
1 year ago
Rated 3 out of 5
Mill is fine. Adjusting is a pain
I didn't realize you cannot make gap adjustments with the hopper on. I realize I could make a few settings and mark the adjustment wheels. If setting the gap is something you think you will do depending on your grain bill, you may want to go with a good 2 roller mill.
September 28, 2020
1 year ago