Logo
 
Sale & Clearance
Deal Of The Day
Kreyer Fan Unit for Rooms Up To 52,500 cu.ft.
SD110L

Kreyer Fan Unit for Rooms Up To 52,500 cu.ft.

$2,599.99
THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol that you already have instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once.

Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments.

The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Both series are fitted with stainless steel screws and show no sharp, cutting edges. Built in defrosters help ensure the system is working at optimum efficiency

The SD series has been designed especially for problematic environments such as wine-cellars with high moisture. The high-performance fans on the SD unit are lubricated for life.

Fan Unit Temp Control Upgrades:

  • 3/4 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit.  Needs to be connected to a Controller to function.  A filter is recommended to protect the solenoid.
  • 3/4 in. Solenoid Filter - protects the solenoid valve from any particulate or sediment.
  • Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve.
  • Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit.



Inlet and Outlet: 1" MPT

The SD110 is sized to:
Cool a room up to 52,500 when the ceiling and walls are very well insulated, using approximately 3.75 tons of cooling power from your chilling system. If the room is half insulated you will two SD110's and more power to cool a room this size. Please be sure to consult with our Wine Team for the proper sizing. The SD110 features 3 fans.

Shipping Limitation: This item does not qualify for free shipping.
 
Prebook Item: Please note this item is not currently in stock, but is available for Pre-Order. We do require payment in full in order to reserve stock.
 
Shipping Limitation: This item ships freight only
 
Special Order: Please note that this item is only available by Special Order during our annual PreSeason Sale, which runs from February through March each year.
 
California Recipients: See Proposition 65 Information
 
Item # SD110L
Weight 105LBS
AvailabilityIn Stock
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Reviews

There are no reviews for this item. Write Review