Kent Fittings - Shut-Off Male Quick Disconnect (QD) x Soda Bottle Cap

Kent Fittings - Shut-Off Male Quick Disconnect (QD) x Soda Bottle Cap

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

Use this cap to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories.

TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install our H481 Kent Shut-Off Female QD w/ 1/4 in Barb. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.

* A single-handed connection and disconnection

* Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material

* Easy installation into your home brewery

* KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i.

Item # H480
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.10 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
I have been using 4 of these regularly for the alst 3 years. 2 of the 4 recently started to leak under pressure. I wish they'd last longer but 3 years for a plastic doodad seems OK.
Norman A on Nov 29, 2018
I have been using 4 of these regularly for the alst 3 years. 2 of the 4 recently started to leak under pressure. I wish they'd last longer but 3 years for a plastic doodad seems OK.
Norman A on Nov 29, 2018

3.3 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 2 out of 5
Replace the washers
Just wanted to add my experience with these caps. The washers truly suck. It is frustratingly difficult to get a good seal every time I do a refill. The washers are just too big and will hang on the threads nearly every time. You have to push them down snugly to get a seal. That sometimes takes several tries.
Now looking for a washer replacement.
My experience with MoreBeer has generally been very good. This is a surprising disappointment.
July 26, 2020
over 3 years ago
Rated 4 out of 5
You need to replace the washers but then they are great
The title kind of says it. I was very frustrated trying to get these to seal till I discovered that cam-lok washers, of which I had a lot of spares, fit and work like a charm. Others have had good luck with EZ cap washers. Either way the ones that come with it suck and I wouldn't even bother trying to use them.

With original washer one star with a replacement five stars
March 12, 2018
over 6 years ago
Rated 4 out of 5
Like A Charm!
I have lots of experience at bottle conditioning beer but none at kegging or force carbonation so I can't really make a qualified comparison between this product and the corney keg adaptations. However, I'm very happy with this gadget! I took Dan's advice and included a pack of EZ Caps on my order along with two cap and female QD sets plus two more caps. The seals included with the cap proved to be ineffective on the first try so I switched to the EZ Caps - problem solved. Good call Dan! I've found that either type of seal will fall right out of the cap and on to whatever lies below, so I just make sure that I'm ready for that. I got the second female QD so that I could put a short piece of tubing on it and use it to flush the male QDs on the caps. The quarter turn required is just too easy! I can't imagine a ball lock connection being any easier unless you like leaving the hose connected to the bottle while your shaking things up. I thought about going with a ball lock system for that reason but I would have wanted an additional pressure gauge between the check valve on the reg. and the corney keg coupling in order to monitor the pressure on the bottle end of the system while shaking it up. So far, I like being able to shake two bottles at the same time while adding intermittent shots of CO2 until they won't accept any more. I can spend the pressure gauge money on more caps! My reg. is set at 40 psi. and these shut-offs don't seem to be leaking at all. This makes for smooth sailing when switching the hose from bottle to bottle. The EZ Caps seem to be holding pressure as well so I've been leaving them on till I'm ready to drink my soda. I'm keeping insulated glasses in the freezer, drinks, caps, bottles and a funnel in the fridge. When I fill the glass I immediately refill the bottle with the same kind of drink replace the same cap and recharge. This way I don't have to spend quite as much time cleaning bottles, caps and funnels. I would have given this product a solid five stars were it not for having to replace the seals in the caps.
June 20, 2016
Rated 3 out of 5
Replace the washers for 5 star review
These work well if you replace the washers with EZ Cap, Grolsch style washers as the supplied washers are too soft and have too large an internal diameter to seal with most plastic bottles.
If you do so, then these are an economical way to carbonate multiple bottles at whatever pressure you want. One cap per bottle for beer or if you use it for water, you can force carb at 30 psi, shake the bottle and then place a regular cap on and it's much cheaper than Sodastream.
June 15, 2015
Rated 4 out of 5
Love these
Been using these for about 6 months to make soda water in 1 liter bottles. Instant gratification and much cheaper that a sodastream.
I have found that you need to be careful about the seating of the gaskets - they tend to shift and bunch. It would be nice to be able to purchase spare gaskets here.
June 5, 2014
Rated 3 out of 5
Leaks like a sieve
I was thrilled to find an alternative to the ball lock screw-on cap version. However, be aware that this one doesn't seal with all bottles. Some won't seal at all and others need to be tightened beyond normal human ability (but are most homebrewers merely normal humans?).

May 9, 2013