Logo
 

 

MoreBeer!
  1. Home
  2. BEER
  3. Beer Brewing Equipment
  4. Fermenting Equipment
  5. Fermenters & Accessories
Kegmenter Fermentation Keg - 7.6 gal.
FE582
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
Kegmenter Fermentation Keg - 7.6 gal.
 

Kegmenter Fermentation Keg - 7.6 gal.

On Sale!
$ 249.99
$212.49 & FREE Shipping on orders over $59.
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Want an easy-to-use, stainless vessel that ferments and carbonates? This 29L/7.6 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock.

Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid.

Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer.

Features:

  • Rated up to 2.5 BAR (36 psi)
  • 4" T.C. lid with ball lock posts
  • Floating dip tube
  • Stainless steel 1.8 mm thick

Use:

  • As a stainless steel fermenter that is easy to clean
  • Great choice for 5 gallon fermentations
  • Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg
  • Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures
  • Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130)
  • As a cellar keg for topping up barrels

 

Warning: Always depressurize keg before removing lid.

Does not include spunding valve shown in example photo. Please see FIL42A.

Kegland Part number: KL05906

Customers Also Purchased

Stainless Racking Cane - 1.5 in. T.C. (With Adjustable Lees Pin)
$79.99

Ball Lock Valve With Gauge and PRV
$42.99

Corny Keg Ball Lock Quick Disconnect (QD) Jumper Line
$17.99

Oxygen Stone - 0.5 Micron (1/4 in. Barb)
$12.99

Racking Cane Filter
$7.99

MoreFlavor!® Barrel Transfer Tool - Replacement Barrel Sealing Bung
$25.99

Scottish Export 80/- Ale | 5 Gallon Beer Recipe Kit | Extract
From $32.99 to $39.99

Rubber Stopper - #3 With Hole
$1.19

MoreBeer! Pro Tank Replacement Tri-Clamp Gasket - 4 in.
$2.99

Kegmenter Fermentation Keg - 15.3 gal.
$329.99

4 in. Tri-Clamp Lid with Ball Lock Posts, PRV & Floating Dip Tube
$54.99

Stainless Tri-Clamp - 4 in. End Cap w/ Pre Drilled Hole
$12.99

Stainless Tri-Clamp Reducer - 2 in. T.C. x 4 in. T.C.
$49.99

ForgeFit® Stainless Tri-Clamp | 4" Clamp
$14.99

ForgeFit® Tri-Clamp Gasket | EPDM | 4"
$1.99

Ball Lock QD With Pressure Gauge and Adjustable PRV
$49.99

Duotight BlowTie | Complete Kit | Diaphragm Spunding Valve | Triple Scale Pressure Gauge | 0-40 PSI | 8 mm Duotight | CM Becker Ball Lock Quick Disconnect (QD)
$34.99

ForgeFit® Tri-Clamp Gasket | Silicone | 4"
$1.99

Duotight BlowTie 2 | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight
$19.99

Floating Dip Tube Filter Attachment
$3.99

Duotight BlowTie 2 | Complete Kit | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight | CM Becker Ball Lock Quick Disconnect (QD)
$29.99

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 11 questions Browse 11 questions and 45 answers
Why did you choose this?
MoreFlavor Store
This was a good size fermenting 5 gallon batches, it would also double as a keg.
Jason B on Feb 6, 2023
SS, >5g, easy lid, pressure. Gonna be a great dry hopping vessel.
Mark P on Aug 27, 2022
This was a good size fermenting 5 gallon batches, it would also double as a keg.
Jason B on Feb 6, 2023
Combination of a few things; primary desire is a keg that can hold slightly more than 6gal; second desire is to
John M R on Sep 16, 2022
SS, >5g, easy lid, pressure. Gonna be a great dry hopping vessel.
Mark P on Aug 27, 2022
The height and versatility.
sency, j on Aug 11, 2022
Fits a small mini fridge to use as a fermentor.
Bob R on Jul 14, 2022
For stainless FV that fits in my fridge!
William on May 6, 2022
pressure fermentation, wide mouth, short
jonthan k on Feb 19, 2022
Sanitize with boiling water, easy to clean, pressure fermentation
Brett C on Dec 2, 2021
what my son wanted
Mary T B on Dec 1, 2021
Pressure fermentation has changed my life.
Murray Alan H on Nov 20, 2021
Good price, good dimensions
Jared W on Nov 11, 2021
best price for what I wanted to use it for.
Riley J F on Nov 10, 2021
this is a great alternative to glass
pierre m on Dec 3, 2020
getting a second, love my first
Jason O on Nov 9, 2020
great price for a stainless steel fermenter that can take the pressure.
Donald S on Nov 8, 2020
Price Price Price
John Morris on Oct 23, 2020
great price point for a stainless steel pressurized fermenter.
Chris E on Oct 20, 2020
To do pressurized fermentation
Greg M on Oct 20, 2020
Wanted another one to use as a keg
Joseph G on Aug 26, 2020
For pressure fermentation and I'm tired of glass carboys
Eric J G on Jul 7, 2020
Fits into a 5 cu ft upright freezer.
Tadd M on Jul 2, 2020
adjunct experiments
Reppert W on Feb 25, 2020
I would like to ferment and carb in the same vessel. I like that it is larger than a 5 gallon keg and the floating diptube is great.
Matt H on Feb 6, 2020
pressure transfer and ferment with minimal chance of leaks
Ryan on Jan 27, 2020
Christmas gift for my son
Nancy K on Dec 10, 2019
size and pressure fermentation
Keith H on Oct 10, 2019
Fermenting under pressure and pressurized transfer to kegs
David S on Jan 11, 2019
It's really cool!
Michael D on Dec 31, 2018
i want to start fermenting under pressure
Steven S on Nov 27, 2018
Fermenting in keg and closed transfers
Maxwell L on Nov 27, 2018
Ferment, pressure ferment, pressure transfer, and dispense beer all in one
Robert on Nov 26, 2018
Combination of a few things; primary desire is a keg that can hold slightly more than 6gal; second desire is to
John M R on Sep 16, 2022
The height and versatility.
sency, j on Aug 11, 2022
What would be the best way to add a thermowell to this?
Seth C on Nov 30, 2018
BEST ANSWER: I was wondering the same thing, my guess is that the easiest way is to use the alternative end-cap H691 and use a bung with a hole drilled for a thermowell. It would be nice if they offered a regular end-cap with a thermowell already welded; I tend not to trust FV surface temperature measurements and prefer in-wort reading as well.
What are the dimensions with/without disconnects?
Matthew R on Nov 25, 2018
BEST ANSWER: Hi Matthew - Our database shows dimensions as - H15.75, W15.75, L16.5 the disconnects add approximately 3/4".
Is this a full-height (skinny) 1/4 keg or the full-diameter (stubby) "pony keg"?
Kendall on Nov 21, 2018
BEST ANSWER: Hello Curtis - Our database shows this with a diameter of 15.75.
Could most people reach their arm into the 4" port to clean the inside walls?
Steven Ouzts on Jan 24, 2022
BEST ANSWER: I would say yes,I'm 185 pounds and my arm fits,
Is there anything special you have to do to clean the keg before the first use?
T Alex Glaser on Jul 3, 2020
BEST ANSWER: I have 8 of these now. I start by flushing 160F PBW through. On ALL of them. For the first time I get what looks like oil settle on top of the fill. I run the mix for a minute or 2 until no more oil forms on top. I dump the hot cleaner and flush with a light citric acid solution to neutralize. Then I follow with a 160F 10% citric acid mix to passivate for 10-15 min. Dump w/o rinse and allow to air dry fully. Just before use I soak in starsan while brewing, and dump just before pitching.
Just ordered and received this - doesn't come with a gasket for the lid. Is this correct? I would think a gasket would be required.
PAUL L S on Feb 14, 2020
BEST ANSWER: There should be a gasket. It is black rubber with some ribs that fit into the grooves on the mating flanges.
Is this really 34lbs? That seems very heavy for a keg. I'm hoping to travel internationally with it, but that would be difficult.
Keir P on May 15, 2022
BEST ANSWER: I never bothered to weigh mine when empty, but when I Googled 'what does a pony keg weigh empty' I got 25 lbs, which is also heavy for any kind of travel. That is, of course, unless you learn to stand on top of it when it's on its side and walk backwards like a lumberjack, then it would be a mode of transport by itself. Cheers!
Do the lid have a hang tab for dry hop tubes?
Thomas P on Nov 21, 2020
BEST ANSWER: They do not have a tab on the bottom of the 4" lid.
I am having trouble getting the 4" tri-clamp to fully seal under pressure. It slowly leaks and I have cranked it down tight and used keglube. Any thoughts on getting to seal tightly?
Michael F on Jan 5, 2021
BEST ANSWER: You might have a bad clamp. I have two of the kegmenters and one of the clamp will seal either, while the other doesn't work on either. I called MoreBeer and they sent me a replacement clamp that worked. With a good clamp it shouldn't be very hard to make the air tight seal.
can the floating dip tube be easily replaced with a solid one? say one from a corny keg, cut to length?
Clint R on Mar 21, 2019
BEST ANSWER: Hi Clint - Yup, that should be relatively simple as long as the replacement dip tube is cut to length and is compatible with ball lock posts.
What's the height of this?
Andrew on Nov 21, 2023
Reviews
Powered by Emplifi
4.6 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
2
0
0
Rated 5 out of 5
This is a great fermenter. If you want to make hoppy beer and do an oxygen free transfer you can't beat this fermenter. It's the perfect size to do a 5 gallon batch. Easy to clean. I don't use the floating dip tube. I replaced that with a solid tube.
August 21, 2023
Rated 5 out of 5
great
best fermenter i
ve ever had, not even close
February 14, 2022
Purchased
 over 3 years ago
Rated 4 out of 5
Works well, it's not to bad to clean out, very heavy when full.
January 24, 2022
Purchased
 over 4 years ago
Rated 5 out of 5
Pressure fermentation
It works easily. Have had no problems.
January 24, 2022
Purchased
 over 3 years ago
Rated 5 out of 5
Highly recommended!
A++ all was as described. Fast shipping. Very satisfied.
December 15, 2021
Purchased
 over 3 years ago
Rated 5 out of 5
It doesn’t leak and easy to clean
I bought this fermentation keg so I can start fermenting under pressure and so far the Keg does what it’s meant to do I thought I had a leak but it turned out to be the spunding valve not the keg, I will soon buy another one since I do 10 gallon batches.
User submitted image
User submitted image
October 3, 2021
Purchased
 over 3 years ago
Rated 3 out of 5
Lid problems.
It’s stainless and cleans easily. Would give it another star but my lid leaks even using keg lube, also the check valve seems to release on its own.
April 18, 2021
Purchased
 over 3 years ago
Rated 5 out of 5
Perfect for all my needs!!
Perfect all in one system. I will order another one. I had a slight problem with the seal. Slow leak at higher pressure.
March 15, 2021
Purchased
 over 3 years ago
Rated 5 out of 5
nice product and price
received but have not used it, what's not to like from price and reviews. storage, ferment under pressure, serve take your choice. I liked it so much I purchased a 2ND one at even a better Christmas price.
December 28, 2020
Purchased
 over 3 years ago
Rated 3 out of 5
A good value but welds not as sanitary as other kegs I own.
Seems like a great value for the price as finding these on secondary markets (10 gallon corneys I mean) is not easy.
Subtracting a star for how many welds inside that seem not to be as high quality as other kegs I own.
Also subtracting a star for the float ball appears to be connected to the dip tube with a silver solder connection. Not a sanitary weld. I'm a little disappointed there.
But again overall it's a good value if you can live with those challenges.
User submitted image
Surface roughness not as smooth as some conicals. should be ok since easy to get hand inside 2 clean
April 22, 2020
Purchased
 over 4 years ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...