Immersion Wort Chiller - 25 ft. x 3/8 in.

Immersion Wort Chiller - 25 ft. x 3/8 in.

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

In a traditional wort chiller, the coils rest on the bottom of the pot and the hot wort on top takes a very long time to reach them, making the entire process time consuming and inefficient. Our original, simple innovation for the Immersion Wort Chiller from MoreBeer! is to move the coils right to the top where the majority of the heat is. This promises to give you the fastest heat exchange possible, to cool your wort down more efficiently and to get your brew into the fermenter as quickly and cleanly as possible. There is also no need to stir during chilling which reduces contamination and allows your trub and spent hops to settle to the bottom of your kettle. 

Some other key differences of our wort chillers. We solder the copper tubes together at the top of the chiller, out of wort, so that the whole unit retains its shape. Other chillers use hose clamps which is a less permanent, but much cheaper, solution.  The connection feeds on our chillers our bent out down at an angle so that if there is any dripping at the copper/vinyl connection point it drips out of the kettle and not back into your beer. Also works perfect with a kettle that features a notched lid. Made in the USA in our metal shop.  

25 feet of 3/8 inch copper tubing
8 feet of vinyl tubing at both the in and the out
Female garden hose fitting is included for easy adaptation to a garden hose.
10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.



This chiller also comes in a water efficient version that uses less water.

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Item # WC20
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 5LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Right size
Murry E. G on Aug 28, 2019
Made in USA
James Gordon W on Jun 14, 2019
Right size
Murry E. G on Aug 28, 2019
To fit my 10 gallon boil kettle
Brandon W on Jun 28, 2019
Made in USA
James Gordon W on Jun 14, 2019
Best fit for Robobrew and could also use as prechiller
Kenneth M on Apr 27, 2019
first chiller thought being elevated would decrease cooling time.
Patrick L A on Apr 10, 2019
Christmas Gift
Rosemary M on Dec 14, 2018
Derek J F on Nov 27, 2018
Saw online that this is a useful item to have for making beer
Lee S on Oct 8, 2018
I want a faster chill
John E on Jun 6, 2018
Because shipping is fast and free. The design seems innovative and I trust more beer .com
Tab h on Jun 1, 2018
Philip K on May 31, 2018
Needed it to cool wort
Kirk M on May 19, 2018
To fit my 10 gallon boil kettle
Brandon W on Jun 28, 2019
Best fit for Robobrew and could also use as prechiller
Kenneth M on Apr 27, 2019

4.4 / 5.0
35 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good after leaks were fixed
Test for leaks before using! I thankfully set this up prior to needing to chill the wort, and three connections sprayed water everywhere. If your unit is like mine, you'll want to really tighten the clamps connecting the tubes to the chiller, and maybe even add clamps there as well. I used the faucet adapter for the source connection, and the washer that came with mine just isn't tall enough to create a tight fit with the adapter. I had to rip the washer out of my garden hose hand sprayer and double that up to the washer in this chiller's source connecter to fix that leak.

Once the leaks were fixed, it worked well.

I would also recommend bending the unit so it will be submerged in your boil. With ~5 gallons in my 8.5 gallon kettle, a lot of the chiller was taller than the top of the liquid. It still only took ~30 minutes to cool to ~80° F. It bends easily.
October 8, 2019
built a recirculating pump in to the system,
Works great with my recirc. pump use ice chest to function as a holding tank for ice water that I run through the chiller.
July 7, 2019
4 months ago
Good value
Second one I've owned. Both leak where the tubing connects and I had to tighten the clamps it comes with as well as add others to stop it. Takes some adjusting to get thr coils high enough to cool the upper portion of the wort otherwise it'll only cool the bottom. Effective/good value for the price.
May 3, 2019
6 months ago
Works great
Did exactly what it advertised to do. Cooled the wort down in a timely manner and what was nice no leaks which always makes the day better.
April 30, 2019
6 months ago
Effective little chiller
Did exactly what I expected it to do. Within a half hour was at pitching temp. No mess great design cleans up easily. Hassle free. Just buy it!!!
June 21, 2018
1 year ago
Does what it needs to do
Works grate for my 5gall batch
February 6, 2018
1 year ago
Old faithful
Still have this but bought the plate chiller, it worked very well for me before its retirement
January 24, 2018
1 year ago
Best value
Just used this to cool 5 1/2 gallons of wort. It was a little sort for my 14 gallon pot but I just stretched the bottom down a little and it now fits my taller pot. I changed the water in line to compression fittings to prevent any leaks. It cooled my wort from 200 down to 75 in about 20 minutes. It probably would have been quicker if I stirred the wort while cooling. No more messing with ice or adding cold water.
January 17, 2016
A good chiller for the price
This is probably the best chiller you are going to find in this price range. It works as you would expect and does a fine job. Probably not the choice for 10 gallons but for 5 it will do the job.
May 13, 2015
I used to let the batch sit in the kettle overnight to cool. Now I can finish, pitch, & clean up all in one session. Makes life with the wife much easier.

This one is good both indoors and out.
May 6, 2015