Logo
 
Sale & Clearance
Deal Of The Day
Gas Manifold - 3 Way (Brass)
D1805
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16", standard for gas line in the beer industry.
California Recipients: See Proposition 65 Information
 
Item # D1805
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 1LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Reviews

4.3 / 5.0
18 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
12
1
4
1
0
Works great.
Basic setup but works great. No leaks! I would totally buy this again! Simple but exactly what I need.
February 16, 2016
Great quality, functions flawlessly.
I first bought the 2-way manifold and quickly realized I needed to upgrade to 3 and drilled another hole in my fridge for a third tap. I use this in conjunction with a few sets of: 'Beer & Gas Tubing Quick Disconnect - In-line W/ Shut-off'. It's great, I can swiftly connect and dispense any number of kegs up to three with a single tank as long as they're dispensed with the same pressure, which so far hasn't been an issue.

It's solid & heavy, leak free, compact and does the job.
May 30, 2015
Cheap solution to single regulator
I don't know how the check valves should function but when I connect a new keg (0 psi), gas and sometimes liquid is sucked up through the other lines that are connected. I now close the other valves when connecting a new keg and this of course solves the problem.
April 13, 2015
Manifold
I just bought these manifold for use in my new 3 kegs system, its really good, becouse you can split up the gas conectors, being a affordable choice.
May 22, 2014
Great Manifold!
I hooked this up inside my kegerator and have 2 air lines going to the kegs and one line set up for my counter pressure bottle filler. Sweet!
May 22, 2014
i use this thing way more than i thought i would
i'm sure there are cheaper options i could jerry rig myself if i wanted to, but i never knew how much i would be switching gas lines to my 3 kegs on and off. this makes it super easy and i'm confident these will always hold a gas-tight seal when off.
May 16, 2014
Very well built.
Nice and sturdy construction. Manifolds close and seal completely. Very satisfied.
May 7, 2014
Finally, organized gas lines! Decent quality product
I bought this manifold last year. It worked great for a while, but then an internal seal in one of the valves failed, and the valve developed a serious leak. I ended up having to replace that valve. I wish the original valves were of higher quality.
May 1, 2014
One of the Tees had a crack in it upon arrival
When I hooked this up to my co2 regulator I discovered that one of the T blocks had a crack in it where it had been over tightened.For the price I paid I would think it would have been leak tested before shipping. It is not worth my time to send it back so I guess I will just eat it.
December 19, 2013
Good manifold, but, leak test before using.
I bought this for my keezer project. I hooked it up to two kegs, a 1/4 and a 1/6. We went through these pretty quick and I connected two more kegs of the same sizes. Within a week of connecting the new kegs, my CO2 tank was empty. I knew I had to have a leak. After refilling my CO2, I started troubleshooting to find the leak. I placed the manifold into a bucket of water and found numerous leaks between the pre-assembled joints. I had to rebuild the whole manifold. I mistakenly tightened a couple of joints too tight and cracked a couple of the brass blocks; which I just ordered. Be careful if you when tightening if you have leaks. I found the leaks by setting my regulator to 20 psi.
August 27, 2013