Logo
 

 

MoreBeer!
KegLand | Gas Board for Duotight In-Line Regulators | 4 Output
D1048

KegLand | Gas Board for Duotight In-Line Regulators | 4 Output

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there with the lowest pressure line in the right-most position. The holes for wall mounting the board and the holes for mounting the regulators are pre-drilled for easy installation. Made from food-grade polypropylene plastic.

Regulators, fittings, labels, and mounting hardware are not included.

For a fully rigged gas board, we recommend the following parts:

  • 4 x Inline Regulators
  • 8 x Rigid 8mm Joiners
  • 3 x Duotight 8mm Tee Pieces
  • 1 x Duotight 8mm Elbow

These items can be found below under You Might Also Need.

 

KegLand Part Number: KL17701

 

Item # D1048
Shipping Eligible for Free Shipping Program
Availability In Stock
Weight 2 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Why did you choose this?
MoreFlavor Store
Vary pressure for different beers, don't forget to get the fittings for the board
Justin L on Sep 10, 2022
expanding capability
Mark L on Apr 22, 2022
Vary pressure for different beers, don't forget to get the fittings for the board
Justin L on Sep 10, 2022
Force carbonate and serve in same keezer with only one gas connection
Kristoffer W on Aug 27, 2022
expanding capability
Mark L on Apr 22, 2022
More beer
Matthew B on Mar 30, 2022
Gas setup
Stephen L on Dec 30, 2021
Updating gas side to DuoTight
Joseph D on Nov 13, 2021
Force carbonate and serve in same keezer with only one gas connection
Kristoffer W on Aug 27, 2022
More beer
Matthew B on Mar 30, 2022
I currently have Bevflex 5/16 ID X 9/16 OD Beer Line Hose and Gas Line Hose (blue & Red). Will Duotight fittings work with this hose?
Steven Johnson on Jul 19, 2022
KegLand | Gas Board for Duotight In-Line Regulators | 4 Output
KegLand | Gas Board for Duotight In-Line Regulators | 4 Output
Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight
Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight
Duotight Push-In Fitting - 8 mm (5/16 in.) Tee
Duotight Push-In Fitting - 8 mm (5/16 in.) Tee
BEST ANSWER: These are made to work with 8mm EVAbarrier tubing which is a more rigid type of tubing than most beer line hoses and it has a much smaller OD than your 9/16 hose. There are DuoTight fittings that will work with (or adapt to) 1/4-inch OD tubing (0.635mm) and 3/8-inch OD tubing (9.5mm) though.
What are board dimensions?
John A. Collins on Jul 4, 2022
BEST ANSWER: 12” x 10 1/4” x 3/8”
What hardware is needed for mounting the regulators to the gas board?
Brett C on May 26, 2024
BEST ANSWER: It comes with screws to mount the regulators to the board. I use this for my kegerator and my sparkling water system and it works great and is simple.
Reviews

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
2
0
0
0
Rated 4 out of 5
Convenient for anyone who wants to customize or DIY their own board.
I recently bought a 8 tap Komos kegerator and wanted independent pressure control for each keg. Unfortunately MoreBeer doesn't sell these yet, so I pieced together (2) four output boards to make it work.

I used #6-32 x 1/2" machine screws with (2) #6 washers to mount the pressure regulators to the board. I used (4) command strips each, per board to mount the boards to the side of the kegerator. One of the boards looks like the picture in the description, while the other board has a tee fitting in leu of the elbow. I had most of the fittings on hand so it was a little cheaper than buying the preassembled board.

Dropped one star for the fact that it doesn't come with hardware to mount it. Thats just me being picky. But it would be a nice to see that as an option for this and the preassembled board(s)
January 17, 2024
Rated 4 out of 5
Convenient board to mount regulators
I finally installed a set of secondary regulators so I can have a highly carbonated saison in the same kegerator as a stout. I added a third regulator for utility (force carbonation, beer transfer, etc). This board is a simple piece of plastic. You could probably buy a plastic cutting board and drill the holes yourself. However, it was a nice convenience to have them pre-drilled and spaced perfectly for the regulators. I used stainless steel #6 3/8" screws for attaching regulators to this board and stainless steel #10 3/4" screws for attaching board to inside of my kegerator. #10 5/8" may be a little safer - long enough to hold but less chance of hitting a coil in the side of kegerator.
April 10, 2023