Logo
 

 

MoreBeer!
  1. Home
  2. BEER
  3. Beer Brewing Equipment
  4. All-Grain Brewing Equipment
  5. Cooler Systems For All-Grain Brewing
Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.
AG336
Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.
Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.
Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.
 

Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.

  
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running.

The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve.

Includes:

  • Insulated beverage cooler
    • Max Volume: 14.7 Gal (56 L)
  • Stainless dome-shaped perforated false bottom
  • High temperature silicone tubing
  • Stainless 1/2" BSP ball valve

External Dimensions: Approx. 19" L x 19" W x 22" H

KegLand Part Number: KL04671

 

Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.

 

Customers Also Purchased

Stainless Elbow Barb - 3/8 in. x 1/2 in. MPT
$6.59

Fermentap Sparge Arm Assembly
$23.99

Drawstring Mesh Bag - 8 in. x 15 in.
$5.49

Stainless Barb - 1/2 in. MPT x 3/8 in. (1/4 in. ID)
$6.59

Carbonating Keg Lid | Quick Beer Carbonator | Welded Gas-In Ball Lock Body Connect | 0.5 Micron Diffusion Stone
$65.99

Hydrometer Jar - 11.5 in. with Volume Graduations
$6.59

Drawstring Mesh Bag | 29" x 29" | Food-Grade Nylon | Brew-in-a-Bag | BIAB | Fruit Pressing
$10.99

Weldless Ball Valve (Stainless)
$38.49

Mash Paddle Plastic - 28 in.
$6.09

Munich Light Malt - Viking Malt
From $2.49 to $57.99

Whirlfloc Tablets
From $0.69 to $129.99

Mash Paddle Stainless Steel - 24 in.
$14.49

ForgeFit® Stainless Tri-Clamp | 1.5" Clamp
$7.69

Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer
$4.39

Stainless Barb - 1/2 in. x 1/2 in. Male BSP
$6.59

Duotight Ball Lock QD Beverage Out | Quick Disconnect Bev Out Push-In Fitting
From $8.79 to $8.79

Yakima Chief Hops® | Simcoe® Brand YCR 14 Pellet Hops | T-90 Hop Pellets
From $2.99 to $2.99

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
Why did you choose this?
MoreFlavor Store
Looking for an insulated cooler that is larger than 10 gallons
Jason E on Jan 19, 2023
Upgrade
Ryan S on Dec 28, 2022
Looking for an insulated cooler that is larger than 10 gallons
Jason E on Jan 19, 2023
To supplement my robobrew 35L
Peyton r on Jan 14, 2023
Upgrade
Ryan S on Dec 28, 2022
Current 10 gal mash tun isn't big enough for 10 gallon batches.
Mark V on Oct 29, 2022
My husband asked for it
Katie s on Jul 13, 2022
I am doing 10 gallon batches and need a larger mash tun.
Lyle L on Jun 8, 2022
To supplement my robobrew 35L
Peyton r on Jan 14, 2023
Current 10 gal mash tun isn't big enough for 10 gallon batches.
Mark V on Oct 29, 2022
I usually take apart and clean my ball valves, and in some cases boil them. I'm curious about the ball valve setup for this mash tun. Is it installed on a bulkhead (i.e. can i remove the ball valve from the outside without unscrewing the entire assembly from the hole in the cooler)? I'm worried that repeated removal of the ball valve from the cooler itself may strip the plastic opening in a way where it starts to fail or leak. Any insights that can be shared on how this ball valve can be removed / cleaned easily are appreciated!
Chris S on Aug 4, 2022
Reviews
Powered by Emplifi
3.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
1
Rated 4 out of 5
Good value
Set up is good but you cant hold the heat. I recirculate so no issue for me. False bottom will need a little pipe under the pick up point to reduce death space.
Overall- good for the price.
September 9, 2023
Rated 1 out of 5
Heat Loss Cooler
Mashed in at 151. And within 15 minutes down to 134! This unit not insulated? Had preheated cooler prior to mashing in with 170 degree water. It is cool outside but but this unit does not seem to be as good as my previous orange cooler. Have never had this issue before.
March 19, 2023
Purchased
 over 2 years ago
Rated 5 out of 5
Easy to use/ Easy to clean
Very easy to setup, use, and clean. Very happy with this decision.
August 25, 2022
Purchased
 over 2 years ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...