Logo
 

 

MoreBeer!
Conical Lid Gasket - 14 gal.
CONP826

Conical Lid Gasket - 14 gal.

THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

This replacement lid gasket is for the 14 gallon MoreBeer! Stainless Steel Conical Fermenter that was discontinued in 2020.

 

Item # CONP826
Shipping Eligible for Free Shipping Program
Availability Out Of Stock
Weight 0.40 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
These are the weak link of my conical and they come from PA so they're a necessary evil.
Mark Fogg 151 on Nov 18, 2022
old gasket is starting to fail
Dale M on Oct 9, 2020
These are the weak link of my conical and they come from PA so they're a necessary evil.
Mark Fogg 151 on Nov 18, 2022
Because they break frequently and are a proprietary part which requires you to buy them vs buying a new fermenter which I’m considering
Josh V on Jan 26, 2021
old gasket is starting to fail
Dale M on Oct 9, 2020
Our fermentor gets a lot of use and we run through a couple of o-rings a year. Wish they lasted a little longer, but they get the job done on our pilot system
Christopher H on Jul 22, 2020
The original gasket failed at the seam!
RICHARD GUTTCHEN on Jul 18, 2019
parts
William J R on May 9, 2019
One one came apart at the seam.
Robert M on Jan 29, 2019
replacement
Art D on Jan 15, 2019
Because the other 2 I have are torn
Kevin C on Oct 1, 2018
Want to have a spare in case my primary gasket breaks mid-brew.
Christopher H on Aug 30, 2018
Because they break frequently and are a proprietary part which requires you to buy them vs buying a new fermenter which I’m considering
Josh V on Jan 26, 2021
Our fermentor gets a lot of use and we run through a couple of o-rings a year. Wish they lasted a little longer, but they get the job done on our pilot system
Christopher H on Jul 22, 2020
Reviews

3.0 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
1
0
4
Rated 5 out of 5
Replacement Gasket
Just purchased it to have a spare. So far, it's done a great job being a spare.
July 15, 2022
Purchased
over 2 years ago
Rated 5 out of 5
Perfect Fit
I had an early model conical fermenter from MoreBeer. Customer service was able to find my original order and track down the correct replacement gasket. It fit perfectly!
October 29, 2020
Purchased
over 4 years ago
Rated 5 out of 5
Does the job
I've had to replace one of these in the 5+ years I've been using my 2 conicals. I find I easily get an airtight seal.
September 12, 2020
Purchased
over 4 years ago
Rated 3 out of 5
To be fair...
I have made dozens of beers over several years in my 14g, but this lid and gasket are the weakest link. I also use my conical to Brite during cold crash and it requires Jedi skills and lots of probe lube etc to get a true airtight seal. I have glued and fixed two of these now and I'm about to order a third. I love this conical, but the clamp and gaskets are a bummer.
Also, I have mostly stuck with the original gasket because the second one I bought was substantially larger, meaning it more easily gapped out when attempting to seal the lead. These gaskets need to be tight fitting.
February 15, 2019
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
February 18, 2019
Tyler W Staff
Rated 1 out of 5
comes apart at the seam
I LOOOVE my MoreBeer conical and I hate to pile on about these gaskets, but I've had the exact same problem. Bought my Ultimate Heated and Cooled Conical in Sept '15, for a timeline. And it's a real problem because once the integrity of the seal is bad on either side of the gasket, it becomes unusable. The seal tears/comes apart at the glued seam particularly on the thinner side (lid up). If there is a glue that works for these, I'd love to know about it. Within two to three batches, they give out. I'm being very gentle and careful. If these gaskets can't be cleaned in normal PBW and sanitized in StarSan, they are of no value to anybody. I'm on my third gasket in two months.
November 30, 2015
Response from MoreFlavor
I used light sand paper. cleaned with rubbing alcohol and let dry. then applied a tiny bit of super glue and held the two ends together for about 5minutes. Worked well for me and the connection has held up well over 15 batches since I made this repair. Good luck with your repair attempts!
December 14, 2017
Nathan D
Response from MoreFlavor
I used light sand paper. cleaned with rubbing alcohol and let dry. then applied a tiny bit of super glue and held the two ends together for about 5minutes. Worked well for me and the connection has held up well over 15 batches since I made this repair. Good luck with your repair attempts!
December 22, 2017
Nathan D
Rated 1 out of 5
Defective and don't last
As everyone else says here and on the 7 gallon and 29 gallon, these are either a bad or defective design. Mine lasted 8 months.

Warranty did not cover it as I purchased a fews month before I started to use the fermenter. Even with the warranty (which I will make sure I use this time around!!!) it really sucks because they won't pay shipping for warranty items. That means I get to pay a whooping $35 dollars each time I need to get it replaced.

I sure wish I looked more into other conical design. Problem is not many others are heated/cooled. I really hope MoreBeer addresses this issue and their higher then competition shipping to Canada prices.
October 11, 2014
Rated 1 out of 5
Breaks too easily
I have to agree with Timothy M on his post. I am on my second gasket. The first one broke at the glued seam. The second one now has a split about 1.5 inches in length where it goes over the flange for the lid.
This gasket needs a redesign at $25.00 a pop.
I now need to order a third one.
February 12, 2014
Response from MoreFlavor
Use a cyanoacrylate glue to adhere the ends back together. I've had to do that a couple of times, at least. Brewed hundreds of gallons over the past few years and have not had to replace the gasket...although I will on my next order. Always good to have a spare. ;-) Hope this helps.
December 14, 2017
Jeff M
Response from MoreFlavor
Use a cyanoacrylate glue to adhere the ends back together. I've had to do that a couple of times, at least. Brewed hundreds of gallons over the past few years and have not had to replace the gasket...although I will on my next order. Always good to have a spare. ;-) Hope this helps.
December 22, 2017
Jeff M
Rated 5 out of 5
Works great
I ordered this yesterday and it arrived today. It is a high quality seal. Nice and soft. It fit my old style 12.5 gallon conical perfectly. It is much better than the original and 100 times better than the McGiver solution I came up with when I discovered the old one was leaking. I can see the splice in the seal but again it is much better than the original was and the fermenter is sealed perfectly with no signs of leakage. If it fails I will update this review.
October 23, 2013
Rated 1 out of 5
Breaks too easily
The gasket is glued together, and after a few batches it comes apart at the seam. I have tried a number of adhesives to repair it but none seem to hold. At $25 a pop, you would think they could build something better. After going through 2 of them in less than a year, I'm back to using the original white one that I used before the $200+ upgrade kit, and the seal on that is hit or miss with the domed lid.
September 25, 2013