Cannular Bench Top Can Seamer

Cannular Bench Top Can Seamer

Cannular Can Seamer  
Can Fresh Aluminum Cans  
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

The Cannular is a manual can seamer that is easy to use, reliable, and beautifully simple.

Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.
The Cannular's table spacer is specifically designed to work with 500ml (16.9 oz) Can Fresh aluminum cans (CAN150).  330ml (11.2 oz) Can Fresh cans are also available (CAN133), but you will need the correct table spacer to use them with the seamer (CAN103). We have tested standard 202 cans and have been able to achieve good seals with proper adjustments.  It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised.
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:
  • Place lid atop the can and place the can on the table spacer
  • Turn the platform lever clockwise to raise the can to the seamer
  • Press the button to turn the machine on and begin spinning the can
  • Push the seaming lever away from you and hold for 1-2 seconds
  • Pull the seaming lever towards you and hold for 1-2 seconds
  • Press the button to turn off the machine and stop spinning the can
  • Turn the platform lever counterclockwise to lower the can

That's all there is to it!

The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.
As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug (CAN101), or with a 6 ft. long cord with Anderson plug and alligator clips (CAN102). The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18V cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we've found that upwards of 200 cans can be seamed on a single battery charge.  
Why Cans?
So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!
  • Power: 250W 24V DC
  • Rated Speed: 3300 RPM
  • Gearbox Ratio: 9.8 : 1
  • Dimensions: 14" L x 9" W x 19.5" H
  • Weight: 40 lbs
*Please note: the table spacer included with the Cannular is specifically designed to use Can Fresh 500ml aluminum cans, which are 167.8mm tall and 52.4mm in diameter.  See below under "You Might Also Need" for an additional table spacer that can be purchased to make the seamer compatible with 330ml cans.
**Note 2: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a .4mm (.015") actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.
For more information on can seaming, check out this site here.


California Recipients: See Proposition 65 Information
Item # CAN100
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 46LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 21 answers
Why did you choose this?
MoreFlavor Store
I hope my homebrew keeps better
Edward on Oct 7, 2019
We want to be able to put the Beers of our Brewery in Planning into the hands of our Customers.
Jason N on Aug 28, 2019
I hope my homebrew keeps better
Edward on Oct 7, 2019
Need an inexpensive can-on-demand option for our brewery taproom.
David B on Sep 18, 2019
We want to be able to put the Beers of our Brewery in Planning into the hands of our Customers.
Jason N on Aug 28, 2019
Very good price compare to other can seamer
Ron R on Jul 27, 2019
Canned homebrew baby!
Steve T on Jul 23, 2019
Best value for the money
Matt on Jul 18, 2019
good size good price
Yvan B on Jul 15, 2019
first affordable canning machine available. Looking forward to giving it a workout and seeing how it holds up.
Evan McElhinney on Jul 15, 2019
Because my wife said no
kyle m on Jul 15, 2019
Wanted to move from bottles to cans for easy transport of my beer.
John pockl on Jul 15, 2019
affordable and good quality appearance
john c on Jul 15, 2019
PRICE. I was looking at the Oktober canner for months and then saw the reviews after a google search to "go buy the oktober canner." Glad I came across it.
Adam L on Jul 15, 2019
Todd H on Jul 15, 2019
Wanted one.
Robert W on Jul 15, 2019
Needing to can my homebrews for competitions and bottle/can sharing events.
DanVic on Jul 15, 2019
Looking for an affordable canning machine.
Nicholas T on Jul 15, 2019
Wanted to can beer, good price
Neil R on Jun 22, 2019
Need an inexpensive can-on-demand option for our brewery taproom.
David B on Sep 18, 2019
Very good price compare to other can seamer
Ron R on Jul 27, 2019
What cans are able to be seamed with the Cannular seamer out of the box? The pictures and video appear to be seaming a 16oz can and no accessories are shown. Is the Cannular able to seam 12oz cans out of the box or are additional accessories needed for 12oz cans? Will MoreBeer be selling empty cans as well?
Michael Cox on May 5, 2019
BEST ANSWER: Hi Michael - 16oz cans can be seamed right out of the box. To use 12oz cans, the adapter's SKU will be CAN103. Also, MoreBeer will be carrying fresh cans, but we do not have an ETA as to when they will be available.
When is this machine going to be available?
John Milne on Jun 1, 2019
BEST ANSWER: Hi John - We do not have a guaranteed ETA as to when the can seamer will be available at this time, but an educated opinion would be sometime between July and August is when we should receive them from the supplier.
Can this do crowlers (32oz cans) as well?
Garrett Delano on Jul 6, 2019
BEST ANSWER: Hi Garrett - This unit is only compatible with 16.9oz cans. However, 12oz cans may be used with the adapter: CAN103.
Will this be available for pre-order or will we have to wait for it to be in stock?
Kevin Noall on Jun 4, 2019
BEST ANSWER: Yes, it will be available for a pre-order. Unfortunately we won't put it up for pre-sale until we get an ETA form our supplier.

3.9 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great Budget Canner with a caveat
If you buy this with the expectation of tuning it, then it is a 5 star product. It does the job wonderfully once you've tuned the rollers.

My model needed a 3/4" socket for the roller nuts. A long one is handy as the belt is somewhat in the way and you need the leverage to move it out of the way.

I ended up sourcing a similar power supply off of Amazon to save some money. I bought the Anderson cable and cut and stripped the pig tail ends to tie into this:

LETOUR LED Power Supply 24V 15A 360W

If you aren't handy then just buy their whole PSU package.

A set of feeler gauges are recommended for tuning. But as a ghetto mechanical engineer I used my calipers and post it notes to tune the spacing.

Once you get your cans sealed dip them in a bucked of sanitizer and check for bubbles. Rotate it a bit as some bubbles will escape from the outer seam. Then pull it out and if it was actively bubbling under water or foaming outside of the bucket you still have tuning to do. If not? Success.

This is a great deal even though it requires about an hours worth of work.

Also another tip- if filing with a beer gun, remember that the technique is relying on a blanket of c02 that the beer pushes out of the can when filling. When you remove the beer gun tip from the can the level drops and air is dragged into the can. So when you near the end of the fill, raise the gun so just the tip is in the beer and the displacement is less.

This is very important for canning NEIPAs. No O2.

Also when canning don't squeeze the cans while handling. If you squeeze the can before you seal it and it pops in and out you are displacing c02 and air will replace it. So handle the cans with care when moving from your filling area to the canner.
August 10, 2019
3 months ago
Can seamer.
Not bad. Set up easy, no instructions to set up for accurate seam. Had to watch the video that shows the guy using it to figure out the height adjustment. Went through 4 cans before I obtained water tight seam. No instructions = 4 stars.
Not gonna lie, first canned beer made me grin a little.
It looks like they are going to make dies for 12 cans. But for now the 16 oz is fine.
August 8, 2019
2 months ago
Doesn't work
Didn't work out of the box. Made adjustments according to the not included manual. Still doesn't work. Incapable of sealing cans.

About the only good thing about it is that its a sturdy well built machine. Just wish it actually could seal cans.
August 6, 2019
Response from MoreFlavor
Hello Joel, thank you for your review. The rollers are set and should not require any adjusting, the table, however, will come unset and will require adjusting. The table is the only element that should require tweaking for a perfect seal. We want you to be happy with your purchase, please contact our customer service team for more support, 1(800) 600-0033 or support@moreflavor.com.
August 6, 2019
Graciela Hernandez
This product is fantastic. I’ve been waiting for something like this for a while. After practicing with a few (5 or 6) cans full of water I got the seam right. You need the right speed and pressure to make a good seam but after having my beer in these cans for a couple weeks they are definitely air tight. Love it!
August 3, 2019
3 months ago
Can be great
It's a well built product but it wasn't set up to seal right out of the box so I have wasted around 30 cans getting it to work properly.
August 1, 2019
2 months ago
Great product for the money.
I did some demo cans right of the box with water to test it out. Worked perfectly out of the box. I did some can fills in a hurry also and they held their seam perfectly. Some folks report it needing lots of adjustment. I didn’t experience this. It will need to be adjusted if you try to use standard US brite 16oz cans. It comes set up for their branded 16.9oz cans which are a bit taller. This can be solved by simply adjusting the turntable height per the instructions. So far I’m very happy with this product.
Canning line build
1st canned brew.
Water test can
July 30, 2019
3 months ago
Not quite ready for prime time
Very Disappointed! And yes, I've watched every youtube video out there on these to this point and read the technical manual that MoreBeer sent out.....that said:

Out of the box, this machine needs improvement. Like others have noted, I have wasted at least 2 dozen cans. So far I have 3 cans of water and 1 can of beer to show for it. 20 wasted cans is not acceptable to me. I have adjusted, adjusted and yes, adjusted everything except the main 1 and 2 closures. I don't have feeler gauges so I am hesitant on adjusting that without them. It seems that you can put 1 can in, get a fairly good seal only to squeeze the can a bit and find liquid seeping out of the lower rim. Next can, no adjustments, works just fine. Try again, the can will either crush or repeat the unsealed seam routine. This machine is just too inconsistent to recommend. I was really looking forward to this, got in on the pre-order, waited months, the cans arrived and I had to sit on them until the machine arrived. Only to have this. I will probably use up the cans I bought but go back to bottling as it's easier at this point. And I have had my wife try the machine also, so it's not just something "I" am doing "wrong". Between the two of us, we can't seem to get the consistency needed to recommend this.

Also, the aluminum cans are kind of a joke too. The aluminum is pretty thin, i have had multiple cans get pin sized holes in them after "sealing" them. Also the lids do not have any emboss for the recycling deposit/return as commercial cans do. Not sure on the legals of this if there are any, but, an observation if nothing else.

Buyer beware is the best advice I can give at this point. I'd love for Kegland to step up a bit and either give us a better video of the adjustments or get this thing set out of the box and package it so it's ready to use when it arrives. At this point though, I'd love a refund.
July 30, 2019
3 months ago
Response from MoreFlavor
Thank you very much for your feedback! We apologize if the Cannular did not meet your expectations. Our customer service team had a chance to demo this unit and found the same thing. This unit will take tweaking and adjusting, but when set right it does the job. Our product team is currently testing other cans to see if they are compatible with the Cannular. As of right now, we only know of the CanFresh cans to work with the unit. If you'd like to set up a return, please fill out our return form or contact our customer service team, support@moreflavor.com or 1(800) 600-0033.
July 31, 2019
Graciela Hernandez
Not ready out of the box
It is requiring a lot of work to calibrate it, wasting many cans
The included plastic base is not long enough for the 16oz cant reach the die
The included plastic base is not long enough for the 16oz cant reach the die
July 29, 2019
3 months ago
Best bang for the buck canning machine!
In 10 minutes, out of the box and tried canning water. So easy to set up, this really takes the homebrew to the next level. So much more affordable than other options in the canning market.
The adjustment guide is a bit complicated and I hope to not have to adjust the machine that often. For under $600 with cans, lids , power supply.. Such a value!
User submitted image
Added Jul 24, 2019
July 24, 2019
3 months ago
Remember, you get what you pay for
Just finished canning a batch of beer with this machine. PLEASE BE AWARE....you HAVE to follow and complete the "Cannular Technical Guide" processes BEFORE canning! I felt that the machine should have been adjusted out of the box, but ended up keeping 6 out of the 20 cans that I canned. The seams were not tight, and beer was leaking from them.

Product looks great, and is made well. The 24V to 110V converter is cumbersome, and I ended up drilling the converter to the back of the machine. The motor is much louder than the Oktober. I am sure I will figure out the tolerances before my next brew, but please make sure to go through the steps prior to wasting cans
July 23, 2019
3 months ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
July 24, 2019
Tyler W Staff