Bucket Blaster - Keg and Carboy Washer

Bucket Blaster - Keg and Carboy Washer

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

  • Quickly clean kegs and fermenters while you tend to other tasks
  • High flow rate pump provides a powerful blast that coats the inside of the vessel
  • Use it for cleaning or sanitizing with your favorite solutions
  • 15L bucket provides a much larger reservoir compared to other models
  • Everything included in the system neatly fits inside the bucket for easy storage

The Bucket Blaster is a convenient and effective system for cleaning and sanitizing kegs, carboys, and other brewing vessels. The beauty of the Bucket Blaster is that you can set it and forget it. Simply set up the keg washer basin with your cleaner or sanitizer, set your vessel over the jet nozzle, power up the pump and let the Bucket Blaster do the work while you tend to other tasks. Perfect for homebrew kegs, carboys, FermZillas, or bucket fermenters.

This unit comes with a 15L (3.9 gal) bucket, which doubles as a storage container when you are not using the system. Other keg washers come with a very small reservoir that make it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. The Bucket Blaster's large 15L reservoir makes it much less likely for you to spill liquid on the floor, and since it can hold more cleaning solution, each cleaning cycle will be that much more effective.


  • Submersible Pump - 2,000 L/hr
  • 15L Bucket
  • Powerful Jet Nozzle
  • 9.5 mm EVABarrier Tubing
  • Gray and Black Ball Lock Disconnects
  • Duotight fittings for all connections

Kegland Part Number: KL15905



Item # KEG304
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 7 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 15 questions Browse 15 questions and 43 answers
Why did you choose this?
MoreFlavor Store
Washing kegs by hand isn’t an suitable option for my back
Cody S on Feb 20, 2023
it was requested as a gift
Patricia F on Dec 17, 2022
Washing kegs by hand isn’t an suitable option for my back
Cody S on Feb 20, 2023
Wash kegs
Rob S on Jan 5, 2023
it was requested as a gift
Patricia F on Dec 17, 2022
Christmas Gift
Judith W on Dec 14, 2022
Set it and forget it cleaning setup!
Jonathan L on Dec 5, 2022
Everyone needs one.
Todd Saunders on Nov 29, 2022
Clean faster
SeanRobert J on Nov 29, 2022
I want to minimize my time cleaning
Big Al on Nov 29, 2022
Larger capacity than Mark 2, and a bit cheaper. I've also become fond of Kegland's DuiTight system.
Raymond Paul L on Nov 8, 2022
Just got kegs will need it
Valued C on Oct 21, 2022
I need it to wash my kegs and carboys.
Anthony L on Sep 27, 2022
Nancy G on Aug 24, 2022
Easy cleaning
Santiago W on Jul 30, 2022
Been kegging for a while, and this will make cleaning easier
Cody E S on Jul 18, 2022
didn't want to clean my kegs by hand anymore
Jake M on Jul 7, 2022
reasonable price for a keg washer. Kegland makes good products.
Matthew K on Jun 9, 2022
My husband wants to make keg cleaning easier.
Kelly C on Jun 2, 2022
To clean easier
Maury K S on May 26, 2022
I have 6 kegs
Bryan m on May 25, 2022
read the good reviews
Maryann H on May 24, 2022
Great ratings. Easy kegging prep
Shawn on May 9, 2022
I want to spend less time cleaning kegs.
Michael Hudson on May 7, 2022
Washing kegs manually is a major pain
DarthTexan on May 4, 2022
I am lazy
Wendell Daugherty on Apr 11, 2022
To clean nitro kegs for a cafe
Ravenswood B on Mar 18, 2022
cleaning solution volume and storing ability
Brian O on Mar 18, 2022
hope it makes keg cleaning easier
Stephen Goadhouse on Mar 16, 2022
to make keg cleaning faster
Corey W on Mar 10, 2022
Tired of manually cleaning kegs and fermenters. Giving this a try.
Vic J on Mar 9, 2022
Help save my back.
Don Tupper on Mar 5, 2022
Friend recommended
Randy W on Feb 25, 2022
Saw a demo of it on YouTube and think it what I was looking for.
John W on Feb 22, 2022
Johnny R on Feb 9, 2022
don't have one, price was inexpensive
Robert on Feb 7, 2022
to wash kegs
Alejandro R on Feb 4, 2022
Looks like it'll work, and it's cheaper than driving around trying to put all the components together separately
RevGIII on Jan 22, 2022
I need to clean kegs.....
Joseph N on Jan 11, 2022
To clean our kegs in our new Kegorator
Brittany A on Dec 29, 2021
keg cleaning
Valued C on Dec 22, 2021
Price and being universal for cleaning other things.
Ken Z on Dec 2, 2021
My husband wants it for Xmas
Jessica B on Dec 1, 2021
On a gift list
Erlene R on Nov 30, 2021
Want it
Mark b on Nov 25, 2021
Reviews are good and it looks like it will reduce clean up time.
Carol B on Nov 25, 2021
Recommended from a fellow brewer.
Stephanie S on Nov 24, 2021
What son requested
Lorraine M on Nov 24, 2021
reviews and videos showing how to use
john w on Nov 24, 2021
Looks easy to use.
John M on Nov 23, 2021
It look like a good product
Gregory S on Nov 23, 2021
Help with clean up time
Christopher B on Nov 21, 2021
Wash kegs
Rob S on Jan 5, 2023
Christmas Gift
Judith W on Dec 14, 2022
What is the pumps max operating temperature? How hot can my cleaning solution be?
Kevin Frantz on Aug 5, 2020
BEST ANSWER: I don't know what temperature the pump is rated for, but I've been using 150 degree solution with no Ill affect.
Will a 1/2” NPT fitting work on the spray end of this?
William Haumann on Aug 21, 2020
BEST ANSWER: Yes. I just received this and the CIP ball I had purchased fits directly on the end of the threaded tube (long nipple). Since that's PVC and the CIP fitting is stainless, I'm not sure if I'll apply any pipe tape to it. I'll do a test run in the next day or so. Since I'll be using it to clean out some sanke keg fermenters to use on Saturday.
Do the pumps in the Bucket Blaster have a warranty? I bought two, one in April and another one in May, so I could have one for cleaner and one for sanitizer. One pump has already failed. When they are working, they are great for cleaning and sanitizing both kegs and carboys.
C Stewart on Nov 3, 2021
BEST ANSWER: These pumps are covered by our standard 1 year wear and tear warranty. Please visit our webpage, scroll to the bottom, and click the "Return an Item" link. Our customer service team will be happy to work with you to sort it out. Cheers!
Can this be changed to PIN keg fittings?
Cory Barrow on Aug 5, 2020
BEST ANSWER: Yes it can! All you need is the plastic Pinlock QDs and it will setup exactly the same way.
Could someone recommend the fittings to be able to clean a kegerator lines?
Dmytro Dobrovolskyi on Nov 22, 2021
BEST ANSWER: I am not sure if MoreBeer sells them, but you could get a ball lock to ball lock jumper for the lines and get a simple PVC 1/2" cap from a hardware store to block the center pipe.
Does this system work with KOMOS type curved top kegs?
Joe Keesling on Aug 9, 2020
BEST ANSWER: It's not nearly as steady without a ring around the top of the keg. With small kegs, I manage fine. With a 5-gallon keg, I think some sort of support is necessary. I have a convenient spot outside my garage where the brick walls form an inside corner where I can prop up my one troublesome keg.

I also prefer to use two buckets. A standard 5-gallon bucket for washing and a second for rinsing. That way, I can just lift out the frame, pump, and keg altogether and move them to the other bucket. A big labor savings when cleaning multiple kegs. Also, the PBW tends to foam, so the added capacity of the larger bucket helps contain it.
What is the diameter of the frame?
Branden Borden on Aug 18, 2020
BEST ANSWER: The metal frame is about 10 inches at widest point. The bucket is between 11 1/4 and 11 1/2 inches.
What material is the stand made of and is it foodsafe? What are the dimensions?
Christopher Pritchett on Nov 30, 2022
Will a single handle corny keg work with this product?
Andrew Rae on Feb 3, 2021
BEST ANSWER: It's definitely trickier with single handle kegs, but it can work. The stand is designed in such a way that with some effort, you can often find a way to sit the keg in a spot where the handle is mostly clear of the stand and the keg will sit on its own, but it's not ideal. But more commonly, I put the washer in a corner and that way, an ill-fitting keg can lean into the corner for support. The downside to
that is that since the water orifice is a single hole, the evenness of the spray coverage is somewhat dependent upon the keg being mostly vertical.
I see a previous post where it is explained that this could be converted from ball to pin lock fittings. Is it possible to equip this with MFL fittings as I have several of pin and several ball lock cornies?
Chris Davinroy on Nov 1, 2020
BEST ANSWER: I believe you can. You may need to supply a couple of barbed MFL fittings and the ball/pin lock fittings. The unit comes with the duo-type push on fittings that connect directly to the barbed ball lock fittings. There’s a collar that you can depress to release and replace with pin lock barbed fitting. I’m not sure how long the duo-type connector will last with repeated replacement. The barbed MFL fitting may be a better option.
What is the voltage of the pump? I would need it 220V
Michelangelo Goracci on Mar 24, 2024
BEST ANSWER: 120v only on my bucket blaster kit JR-2000 / KL 15936 submersible pump. The sticker on the pump does not show a /220v option, and there is no waterproof switch on the outside. If only those guys down-under in the Land of Kegs had a 220v submersible option.
can this be used with the AG529 Low Volume CIP spinning spray rotor? or the BE519 Flexi Arm? Since all 3 are from Kegland will the connecting ends work together?
Michael P Chiodo on Jan 28, 2024
Bucket Blaster - Keg and Carboy Washer
Bucket Blaster - Keg and Carboy Washer
BrewZilla Low Volume CIP Spinning Spray Rotor | Clean-In-Place Spray Head | Only Requires 3 GPM Flow Rate!
BrewZilla Low Volume CIP Spinning Spray Rotor | Clean-In-Place Spray Head | Only Requires 3 GPM Flow Rate!
Stainless Flexi Arm |  Flexible Recirculation Arm for BrewZilla | 31.5
Stainless Flexi Arm | Flexible Recirculation Arm for BrewZilla | 31.5" Long | 1/2" Hex Nut
BEST ANSWER: Yes, the CIP does fit. However, the end that attaches to the Brewzilla leaks badly, no amount of teflon tape will stop it from leaking. I recommend getting a second recirculating arm (AG475H) and attaching the CIP to it.
What's the burst/temperature rating of the EVA barrier tubing? Thinking about using this with an upgraded pump
Matthew Reardon on Aug 7, 2021
BEST ANSWER: Enter Temperature range of -40 to 125° F
Use this size for gas line applications. Also used for long draw beer lines over 25'.
Technical Specifications: 5/16" line provides .40 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 5/16" line holds 1/2 of an ounce per foot. PVC Free an answer to this question.
can you provide 220v pump instead of 110v?
david Vepkhvadze on May 28, 2021
BEST ANSWER: We can only offer this kit in the 110v version at this time and cannot make any substitutions to the hardware included. We apologize for the inconvenience.
What's the temperature rating for the pump? Can I buy the set without the pump and use my riptide pump?
Timothy Chilcoat on Aug 13, 2020
BEST ANSWER: The kit is only sold as a complete set and the pump cannot be removed. The pump can be operated safely with fluid at 150 degrees fahrenheit or less indefinitely; momentary exposure to 190 degrees will not cause lasting damage, but continual operation at that temperature may.

4.4 / 5.0
48 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 2 out of 5
Works When it Works
I would not buy this again.

It's a very cheap pond pump with a 1/2" pipe screwed into it, combined with a stainless wire frame and a bucket, plus some tubes and fittings. The pipe shoots liquid straight up at the keg bottom, and the tubes shoot liquid through the gas posts and tubes.

I used my pump a few times (maybe 5 kegs), and it died. I used it with warm water and a combination of sodium percarbonate and washing soda. Nothing harsh. It gave out. I have heard from others with the same problem, and Kegland does not have direct warranty service in the US.

These pumps cannot be repaired. They are sealed with epoxy.

The Bucket Blaster does not do a good job of keeping kegs vertical. They tend to lean, so the liquid shoots off to the side of the kegs. It is also too narrow for wide Megamouth Torpedo kegs to sit on without some risk of sliding off.

I generally got good results, but I had to wipe a yeast ring off the inside of a keg, which was what I bought the machine to do. The yeast was not dried on.
October 30, 2023
Rated 4 out of 5
Good over all product.
It has made cleaning kegs so much easier. Assembly was no problem at all.
February 6, 2023
1 year ago
Rated 5 out of 5
Don’t hesitate, just buy it!
Dang guys, this device beats the heck out of the mark II and this thing will last a lifetime. The price point is spot on as well!
December 20, 2022
1 year ago
Rated 4 out of 5
Well Blast my Bucket
This thing works like a charm. just two small things. Be careful when you screw the white pipe into the pump. The fitting on the pump cracked with just the slightest bit of torque. Since this ends up being under the water line it still works but I hope it lasts. Also its easy to king the hoses going to the kegs as its a bit of a tight space to fit the connections while balancing on the frame and fitting within the bucket. But man this thing really works. I dig it.
December 13, 2022
1 year ago
Rated 5 out of 5
Solid product; more capacity than the Mark II keg & carboy washer and reasonably decent pressure from the pump.
November 22, 2022
1 year ago
Rated 5 out of 5
Blaster cleans carboys, kegs, and fermenters effortlessly!
I've typically simply soaked my carboys, kegs and fermenters in PBW overnight or longer to get them clean. I can't believe I waited so long and wasted so much money on PBW & Star San over the years!

This Keg Blaster/Washer is awesome! It cleaned my 7.9Gal Fast Fermenter effortlessly in only a few hours. I've never seen it so clean! I can see my reflection in the corny kegs they are so clean!

I highly recommend the Keg Blaster. It's not a "Nice to have..." its a "Need/Must have!"
October 8, 2022
1 year ago
Rated 5 out of 5
Couldn't be happier
It was easy to set up and use. No problems. No complaints. Completely happy.
August 24, 2022
1 year ago
Rated 3 out of 5
Works good, but not perfectly
Bucket Blaster does a good job cleaning lightly soiled equipment like Corny kegs, but struggles with tougher jobs like fermenter crud rings. I put a 60 liter Fermzilla on it for a couple hours using PBW and it never got completely clean. It does a great job of sanitizing, but be sure to use a low-foam product like SaniClean or it'll make a mess. Despite the warts, it beats the heck out of doing things by hand and it saves time.
August 15, 2022
1 year ago
Rated 5 out of 5
Bucket Blaster worked great
The Kegland Keg and Carboy Washer worked great for cleaning my 6.5-7.0 Gallon Glass Carboys. I don't have kegs. There was no problem with fitting the neck mounted carboy handles through the top of the rack. Since I don't have kegs I was able to simply screw the pipe directly into the pump without using the other fittings and hoses. While no instructions come in the box there are complete instructions in PDF format at the Kegland website.
July 22, 2022
1 year ago
Rated 5 out of 5
It saves on water and cleaning chemicals since you only need to mix up a few gallons to blast multiple kegs or fermentors. I have also found it to be very versatile and it gets used in all sorts of regular cleaning tasks. With the addition of a ball lock coupler and PVC cap I use it to clean the beer lines for my kegerator and jockey box. I also cut out a small piece of plywood so I can blast growlers.
Simple growler stand.
Simple growler stand.
July 1, 2022