BrewZilla All Grain Brewing System With Pump - 35L/9.25G (110V)

BrewZilla All Grain Brewing System With Pump - 35L/9.25G (110V)

On Sale!
Brewzilla Accessories  
Additional Accessories  
In Stock
60 day no hassle return policy. Details

If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the BrewZilla is a complete turn key solution. The BrewZilla is an all-in-one electric brewery that has built-in elements for heating and boiling, programmable mash schedule and delayed start, a built-in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere. 

The V3.1.1 unit features an upgraded main circuit board that changes how the automatic step mashing functions. Now when moving from step to step, the timer for each step will not begin counting down until the programmed temperature is reached. This means more accurate mash schedules than ever before! The new board also introduces boil addition timers so you'll never miss the mark for hop additions.

To get the Wort Chiller Connection Kit for free, add the item to your cart along with the BrewZilla and use code ZILLAKIT at checkout. 

New accessory! Check out the BrewZilla Whirlpool Arm, which uses the unit's internal pump to recirculate and spin the wort, improving hop extraction and chill times. No more stirring!

Automatic Step Mashing & Delayed Start! 
One of the coolest features of the BrewZilla is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the "S1-S6" button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the unit will sound an alarm and hold the last set temperature.

The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the BrewZilla ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.

Great Components
The built-in magnetic drive pump easily recirculates the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the same tubing to transfer your wort to your fermenter. As with any mash, be sure to stir your grain very thoroughly after mashing-in so you start out with an even temperature throughout the grain bed.

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

We highly recommend adding the optional BrewZilla Neoprene Jacket to help reduce heating times and maintain a more vigorous boil. The extra thick neoprene jacket is custom designed to insulate the entire kettle portion of the BrewZilla while staying out of the way of the ball valve and handles. The jacket can help you acheive up to 10% faster heat up times and cut heat loss from the boiler in half.

The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it out and tabs at the base so you can set the malt pipe over the kettle to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.  

What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the BrewZilla is the ultimate value. The cost is half of the next comparable system with programmable mash steps and nearly the same as buying converted coolers and a kettle. We've brewed on all the systems and we can truly say the BrewZilla is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2' of silicone tubing for the sparge.

Use the Pump for More Than Just Recirculation!
One of the surprisingly handy features of the BrewZilla is that the recirculation pipe features a female camlock. This allows you to hook up other accessories and use the unit's pump for more than just recirculating wort. With a male camlock and silicone tubing, for example, you can use the internal pump to push wort through a plate chiller or counterflow chiller. Check out our selection of camlock fittings here


  • Gen 3.1.1
  • Stainless steel construction
  • 9 gallon total capacity with a finished beer output of 5-6 gallons
  • Digital temperature controller
  • Automatic step mashing with 6 programmable stages
  • 110V power and plug
  • Dual heating elements for total control (1000 watts and 500 watts)
  • Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
  • Immersion wort chiller included
  • Stainless steel malt pipe/basket
  • Stamped in volume markers
  • Glass lid
  • Magnetic drive pump for recirculation
  • Recirculation arm
  • Bottom handle for easy lifting and pouring
  • Upgraded rocker switches
  • Rubber feet
  • Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
  • 32.75 in H (with recirculation arm) x 12.5 in D
  • Recommended max. grain bill - 18 lbs
  • Recommended min. grain bill - 8 lbs

You Will Need:

  • 2' of H985 1/2" ID Silicone tubing for sparging and draining.
  • To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).

Note: The manual references an element for a different market.  This unit comes with two heating elements for a total of 1,500 watts.

Kegland Part Number: KL05838


Item # AG475A3
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 30 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 18 questions Browse 18 questions and 111 answers
Why did you choose this?
MoreFlavor Store
I liked it
William m on Sep 22, 2020
Good reviews
james H on Sep 14, 2020
I liked it
William m on Sep 22, 2020
Great value for the price
Heather S on Sep 22, 2020
Good reviews
james H on Sep 14, 2020
all in one, all grain upgrade
DAVID T on Sep 14, 2020
Roger T on Sep 11, 2020
Have the previous version, without pump. It's great.
Rainer B on Sep 8, 2020
To check the quality of the product
Angelica Moreno on Aug 31, 2020
A friend owns one. It’s very easy
Ryan S on Aug 27, 2020
Did the math on upgrading my existing propane to do all grain and add capacity and this is less expensive and cheaper to run long term.
Andrew J on Aug 26, 2020
Interested in moving to simpler brewing system
Larry K on Aug 17, 2020
Reviews and comparisons showed performance is on par, even better in some aspects, than the grainfather. Also at a more affordable price!
Maxwell G on Aug 16, 2020
Wanted to simplify my brew day and have more control over mash temperature.
Joshua H on Aug 14, 2020
I'm looking to shorten my brew day as well the ability to brew inside
Clinton on Aug 11, 2020
Looked at different ones and liked the attachments for distilling also , parts seem to be readily available through more beer
Gary Sanger on Aug 11, 2020
I wanted to graduate from extract brewing into all grain brewing using an all in one electric system and after months of research I decided that the balance of features price and footprint were right for me.
Rodolfo C on Aug 6, 2020
Can brew indoors in my apartment and don't have to change my outlets
Mary C on Jun 24, 2020
I've been brewing extract for a few years and finally decided to go to all grain. All in one electric systems seemed like a no brainer!
Joseph D on Jun 24, 2020
Have always wanted to upgrade from manual mashing
Clifton C N on Jun 23, 2020
best value for the koney
Chad N on Jun 14, 2020
Cost and quality for all grain brewing
Joshua C on Jun 12, 2020
Read many reviews on various sites.
Michael on Jun 11, 2020
Started in all grain as BIAB but limited by equipment size (was extract brewing previously). This appears to satisfy all needs for brewing batches of quality all-grain beers.
Steve H on Jun 3, 2020
The latest version of a popular brew system.
Christopher J K on Jun 2, 2020
Has everything I need in a compact unit at a decent price. I use my Digiboil for sparge water.
Carl Brevelle on May 25, 2020
The reviews
Adam W on May 19, 2020
Sounds like an easy less cluttered way to brew the small 5 gallon batches
KEVIN M on May 16, 2020
Annie T on May 14, 2020
good deal
david r on May 6, 2020
Kim R L on Apr 25, 2020
Ratings show good value for money
John S on Apr 21, 2020
Switching from gas to electric, youtube recommended
Jackie A on Apr 6, 2020
Best option to price
Valued C on Mar 26, 2020
I liked the built in pump which lets me pump thru cooler or into fermenter.
Kenneth J on Mar 13, 2020
Friend recommended
Jeff C on Mar 10, 2020
good reviews
Robert M on Mar 5, 2020
9 Gal compared to 7 of the Mash and Boil.
Sean B on Feb 28, 2020
To go auto
Tim A B on Feb 14, 2020
Move to electric brewing
Thomas H on Jan 30, 2020
The great reviews and videos on this system
Timothy E on Jan 23, 2020
cheaper then the grainfather, heats faster, seems to do what I need for less
JASON ANDREW C on Jan 13, 2020
Online reviews
Lesley S on Dec 27, 2019
I have watched many youtubes video about this system and I think it would be best for my style of brewing , making it easer with better quility beer, and faster, with less equipment.
RICHARD T on Dec 24, 2019
Purchased on recommendation from sales rep. Looks like a great entry-level solution
Whit W on Dec 9, 2019
Looking to get started in All Grain with an all in one system, liked reviews.
Mark E on Dec 4, 2019
I’ve used it before and liked it a lot. Easy to use system.
Robert P on Dec 4, 2019
Owned one and love it. Gave to a friend and ordered another. Easy to use. Cheaper than Grainfather but similar capabilities.
Kathleen P on Dec 4, 2019
Greene, L on Dec 4, 2019
Because it is awesome!
Mark D on Dec 3, 2019
looking for a good all-in-one
jeffrey r on Dec 3, 2019
I read good reviews and I live in an apartment with limited space.
Kenan A on Dec 3, 2019
Great value for the price
Heather S on Sep 22, 2020
all in one, all grain upgrade
DAVID T on Sep 14, 2020
To sparge do you need to heat secondary water and pour over the raised grains?
Kenneth A on Feb 26, 2018
BEST ANSWER: Yes, that's exactly what you do. I own the version 2 and it's quite easy
How does it keep the trub out of the drain?
Kenneth A on Feb 26, 2018
BEST ANSWER: There's a removeable screen/false bottom that you put in first before the grain basket that keeps everything out of the drain as well as the recirculation pump. Very easy to clean at the end of brewing as well.
Does this need to be vented for steam if used in the basement?
Steve Seithel on Feb 11, 2019
BEST ANSWER: Guess it depends on the size of the basement. You will be boiling off upto a gallon of water. I use it in a closed garage and have not had any issues with condensation, granted it is more ventilated than a basement. I would brew in a basement.
My Robobrew only gets as high as 212 degrees, anyone else have that issue?
Chris Padilla on Apr 18, 2019
BEST ANSWER: Chris. I assume you are setting the temp to something like 220 or higher (I usually set mine to 240) but are noticing the temp of the boiling liquid wort only gets up to 212 degrees fahrenheit, correct? (Or is the issue that the set temp only goes up to 212? I'm assuming it's the former.) The boiling point of water is 212 deg fahrenheit. Under normal circumstances, you wouldn't see your wort boiling at a higher temp unless you were brewing way below sea level (unlikely although I once enjoyed an IPA made with seaweed in it) or you have enough sugar in the wort to make candy - which probably wouldn't make a very good beer. At any rate, if your wort is boiling at 212, it's probably time to pour a glass of your last batch and RDWHAHB. Cheers!
What is the height of the kettle when measured from the top of the false bottom to the rim?
ANDREW EVANS on Apr 21, 2018
BEST ANSWER: 17" from the top of the false bottom to the rim. The false bottom is 1 1/2" tall making the total depth of the kettle 18 1/2". The malt pipe (the insert basket for the grains) is about 15 1/2" tall measured from the inside.
Is there any kind of Flow control on the pump or is it just on/off?
William J Leeper on Apr 2, 2018
BEST ANSWER: The pump on the Robobrew does not have flow control.
would this be good for biab?
Phillip Johnston on Aug 25, 2018
BEST ANSWER: It replaces the need for a BIAB. The inside cylinder is the "Bag." Go ahead, you won't regret this purchse.
Anyone knows the box size from Robobrew v3?
Aimbere Moura on Jan 29, 2019
BEST ANSWER: Hi Aimbere - By "box size" would you be referring to the controller module?
Can you whirlpool with the included pump?
Jay Penneau on Jun 15, 2018
BEST ANSWER: Probably. You would have to hold the silicone tub by hand to keep it pointed the right direction. Or rig a clamp of some sort.
Does this come with the silicone tubing for the recirculation arm or does it need to be purchased as an add on? Online reviews in user groups says its included, but here it says it needs to be purchased as an add on. Thanks
brian terwilliger on Feb 26, 2018
BEST ANSWER: This does not include the tubing.

You will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950 hose clamps and (1) brass hose by thread adaptor (H508).
Does anyone know the actual watt density of the heating elements?
Kyle on Jul 8, 2020
BEST ANSWER: We do not have specifics on the watt density of these burners. However we can note that the elements do not have direct contact with the wort and we have never experienced any scorching or other problems associated with high watt density.
For the 110V US version, what amp rating cb does it require? Wondering if 15a is enough. The manual is for the higher wattage European version, and doesn't specify for US...thanks in advance.
Christian Whitlock on May 7, 2020
BEST ANSWER: 15 amps is the perfect amount to run this unit. If you're getting at least 100v at the outlet, measured with a multimeter, you will have exactly 1500 watts of power for the elements.
Can you do half size (2.5 gallon) batches?
Gary on May 4, 2020
BEST ANSWER: You can do half size batches in this machine with two drawbacks. For the mash you will need to use more water to make sure your grains are covered all the way. Pretty much you are adding your full bre-boil volume into the kettle instead of mashing with less and adding sparge water. Also if you opt for the chiller it might not have enough coils submerged in your wort to operate at maximum efficiency. Aside from that it will work and you'll be able to make some great half batches. Cheers!
What is boil off rate? 1 gallon per 60 or 90 minutes like the mash and boil?
Craig neuberger on Apr 10, 2018
BEST ANSWER: Depending on batch size its around 1/2 gallon per 60 mins
Hello, I have the v3 and looking for the gasket that is located where the pipe fits into the female camlock. Does anyone know I can buy one? Thank you LJ
LJ on Apr 2, 2018
BEST ANSWER: I believe this is what your looking for.
Replacement O-Ring for BrewZilla / DigiBoil Ball Valve
Replacement O-Ring for BrewZilla / DigiBoil Ball Valve
Is there a warranty?
Isaac Ramsey on Mar 5, 2018
BEST ANSWER: Yes, there is a one year wear and tear warranty on the product.

4.5 / 5.0
64 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Love my BrewZilla 35L
Kudos to MoreBeer for a very quick delivery - only 2 days after I placed the order.

Setup was easy after watching the video on kegland.com website (https://www.kegland.com.au/media/pdf/BrewZilla%2035L%20-%20Instruction%20Manual.pdf).

Completed my first brew in the new BrewZilla without any issues. Brewed a German Altbier and hit my target numbers spot-on. Previously used BIAB, and with the new setup my efficiency improved to 72%. Also it knocked-off about an hour from my brew session compared to my BIAB process. Cleanup was a big improvement as I used the pump to circulate water & sanitizer through the system.

Overall, very happy with my purchase.
September 15, 2020
3 weeks ago
Made well as described
Am still reading about and writing my own procedure to follow to not miss a step, I made wine for 25 year and never had a spoiled batch due to proper sanitizing. I have watched all videos with reference to BrewZilla All Grain Brewing System With Pump - 35L/9.25G (110V) that I purchased.
User submitted image
Added Sep 2, 2020
September 2, 2020
1 month ago
Just alright
No instructions, slow and weak. Takes a lot of adjusting to reach target gravity.
August 17, 2020
1 month ago
Accidentally dropped it off the table and still works!
Sturdy, robust and simple design. My Brewzilla fell off the table with 7 gal of wort. How?... I had just inserted the chiller, connected the hoses, ran cool water... minutes later, lost concentration and pulled the hose which pulled down my Brewzilla off the garage table. Broke the circulation arm, pushed slightly in the ball valve and left another dent in the handle area. I was distraught!!. I cleaned everything dried the equipment and connected it back to the wall. The display and heaters still worked!!!. Inevitably something had to give in, so I only had to replace the circulation arm. I’m very happy with this equipment.
Additionally, I have made 7 batches filling it up a previous night and using the timer to raise to Mash temperature in the morning in time for when I get out of bed to pour in the grain.
Great system, I definitely recommend it.
July 11, 2020
Works Good
Only brewed one batch so far. Things went real smooth no complications. Batch is fermenting at the moment will keg in about a week. Efficiency was better than expected, exceeded the recipe expectations. I'm pleased so far. Only thing I can complain about is there was no manual. not a big problem because there is a pdf copy on this site and plenty of youtube videos but still a hard copy of my own would be nice.
July 7, 2020
3 months ago
Dollar for dollar the Brewzilla is the best option out there for an all in one system
Easy to use, fits exactly what I need in my normal brew days. I will admit there were a couple of minor issues when I first received the Brewzilla, one of the knobs on the lid was not able to be attached and the metal ring in the lid was dented slightly but MoreBeer sent out replacement parts very quickly so no big deal at all. The ability to easily and efficiently step mash is awesome! I wish the control panel was mounted higher, but again no big deal. I also purchased the insulating wrap and whirlpool arm which I recommend. Cleanup is a breeze as is transferring your wort from the Brewzilla to your fermenter by using the pump. It would be difficult for me to be happier with my purchase, and the price is right to boot!
User submitted image
Added Jun 27, 2020
June 27, 2020
3 months ago
Does what it's supposed to do.
The device itself does what it is supposed to do. The electrical elements heat faster than I expected. However, the wort chiller isn't the best and even when using the ice bath method requires a long time...30 min?.. to chill down. The documentation, user manual, was not included with my system. Even when I found a PDF document online, I was not impressed. The document is a non-linear jumble of assembly instructions, part descriptions, and operational instructions. Without Youtube videos, I would have been completely lost on how to use this system.
Switched on for the first time
Switched on for the first time
June 15, 2020
3 months ago
New Brewzilla v3.1.1
I received the new v3.1.1. It arrived in great shape and fairly quickly. I just finished brewing my first brew and things went very smoothly.

If is an interesting learning curve coming from coolers and brew kettles, etc.. I am impressed with the process and ease of use.
June 7, 2020
4 months ago
Love it!
Wow, this is so awesome! I love that it's an automatic system with everything in one unit. It makes brewing so much easier and clean up as well.
March 27, 2020
6 months ago
It works, just...
The first BrewZilla arrived with large dents (yes, multiple) on the outside. You wouldn’t buy a brand new car dented, so I returned it. Customer service was good and painless, but it did take awhile for the new one to ship. The new one arrived with what are probably manufacturing dents on the “mash pipe” (we’ll call this the “mash basket” because the instructions refer to two things as the “mash pipe,” more on that later). The stainless steel is thin, more than likely to reduce weight (and cost). The dents were small, won’t be seen or affect anything.

Looking at this thing, it looks premium. Feeling this thing, you start to wonder. The lightweight is great though. It made things easier when I wanted to lift the whole unit with 6.25 gallons getting ready to boil. Assembly was a little confusing. Seems like the instructions went from English to Chinese and back to English, but you can figure it out. Main issue with the instructions was the order for the mash screens. The tube that screws into the bottom screen of the mash basket is referred to as the mash pipe, while the mash basket is also referred to the mash pipe (at least how I read it). The screw on handles for the lid unscrewed when I only picked up one of them (physics, amiright?). The fittings seem to be just under half an inch. My old half-inch tubing was too large for them, which made for an aggressive trip to homebrew shop. Three-eights seemed to fit well.

Brew day went well though. Used the Neoprene jacket, which was a pain to get on (the Velcro takes place under the pump tube—have someone nearby to help). Took about 1.5 hours to get 7.5 Gal from 68F to 170F. Pumped out 2+ gallons for sparging and mashed in w/ 14lbs for grain. I recirculated the entire time to see how the pump did. Had no clogs or hangups. When it came time to sparge, I found that pulling the mash basket up and, just after the feet pass the rests, rotating it into place was the easiest and smoothest way to get it to sit. The top mash screen worked well to spread the sparge water evenly. Started the boil with ~6.25 Gal wort. I shut the 1000W off and lost boil. I switched to the 1000W burner only and it was still not a good rolling boil, so I would turn the 500W on and off as needed. I did not use the immersion chiller as I have a plate chiller from my previous setup. I would recommend ordering some stainless steel worm hose clamps for the tubing. All in all, from Mash In to Cleaned Up was only 4 hours.

Overall, the system worked. The beer is bubbling away right now and I’m looking forward to getting it in the keg. I had helped a friend brew with the Mash and Boil, which got me on this all-in-one kick in the first place. I really like the way it worked but wanted some extra space to do some bigger beers. This system has a lot of bells and whistles with programmability I haven’t begun to dissect, but I keep getting emails to review it. So, here you go!
Mash out / Sparge time
March 20, 2020
6 months ago