Logo
 
MoreBeer!
BrewBuilt X-Series Uni Rotating Racking Arm | 1.5" T.C.
CONP322

BrewBuilt X-Series Uni Rotating Racking Arm | 1.5" T.C.

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

No one likes leaving beer behind. Make sure you get as much out of your fermenter as possible with this rotating racking arm for the BrewBuilt X-Series Uni. This will allow you to access the beer that is below the level of the racking port and features an extended position indicator that tells you where the arm is angled and can be used to rotate the arm. A solid upgrade for the X-Series base unit, or a traditional option for Plus and Pro users over the floating racking tube included with the Pressure Pack.

  • 1.5" tri-clamp
  • Arm position indicator
  • Made from 304 stainless steel

For racking arm with clamp and gasket, click here.

 

Item # CONP322
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - Out Of Stock
Weight 0.50 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions
Why did you choose this?
MoreFlavor Store
My old one has threads and I have to disassemble it every time.
Stephen W on Mar 11, 2022
My old one has threads and I have to disassemble it every time.
Stephen W on Mar 11, 2022
This racking arm fits well with the 3pc 1.5" Stainless Ball Valve
tristen c on Dec 10, 2021
This racking arm fits well with the 3pc 1.5" Stainless Ball Valve
tristen c on Dec 10, 2021
Will this work in the sample port?
scott swartz on Dec 14, 2021
What is the OD of the pickup tube?
Jeffrey B Thompson on Mar 21, 2024
Reviews

2.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
2
1
Rated 5 out of 5
I CRACKED THE CODE!
As others have said, this doesn't fit the lowest horizontal port on the X2. But it DOES fit the ports just above that which is at a better height in the cone anyways. I'm really not sure what the lower port is for so moving forward I'm just going to cap it.

So I have the included TC port on the left, racking arm and butterfly on the right, and a blank cap over the lower port. Then coming out of the bottom I'm using a 2" 90 to the included 2" butterfly valve.

It really is a great racking arm - the indicator is the biggest and most useful I've seen.

Cheers! Dan from Hops & Gnarly on YT
November 6, 2023
Rated 2 out of 5
Doesn't fit the X2 either
I was hoping this might be a better fit for the new X2 conicals, since they have horizontal ports in the cone. Unfortunately, at least for the 7 gallon version, it's not. The pickup tube is too long. While you can get it in there, it's pretty much picking up from the bottom of the cone. And it cannot be rotated because it gets caught on the walls of the fermenter. Additionally, the arm on the outside is too long for the 7 gallon X2 and will get jammed on the legs.

I'm giving it 2 stars because I was able to trim the pickup tube and arm with my Dremel to get it to work. It's also half the price of the next cheapest tri-clamp racking arm I could find. So if you don't mind cutting it up, it's a pretty good deal.
April 17, 2023
Rated 2 out of 5
Angle of the dangle
The angle is wrong for a conical. It should be more of a bend to reach farther down the conical. I will have to mandrel bend this tubing at a machine shop to be happy with it.
April 3, 2022
Purchased
over 2 years ago
Rated 1 out of 5
It is a poor design - not bent to the proper angle. Since it mounts on the racking port that is angled upward it ends up less than half an inch lower than the mounting port, leaving 8 inches or so of inaccessible wort even when pointed directly down.
February 20, 2022
Purchased
over 2 years ago