Logo
 

 

MoreBeer!
BrewBuilt® AfterBurner™ | Propane Brewing Burner
BE200

BrewBuilt® AfterBurner™ | Propane Brewing Burner

THIS ITEM HAS BEEN DISCONTINUED
Lowest Price Guarantee
This item has M.A.P. pricing so you can be confident you won’t find it for less.  Learn More.
Description

Made in the USA from 304 stainless steel, the BrewBuilt AfterBurner is a very sturdy burner that will boil beer quickly and support the largest kettles with ease. Think you might someday get into all-grain brewing? The BrewBuilt Burner is designed to bolt together, via an optional connecting package, with additional BrewBuilt Burners to create your own all-stainless dream stand. Also availabe are optional handle and caster options which allow the single burner, or a connected brew stand, to be moved without straining your back. 

Amazing features for the price
This is a beefy burner that will give you peace of mind while supporting up to 25 gallons of boiling wort. Made from 304 stainless steel it will last a lifetime. The wide-profile burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. The stainless burner ring offers flame protection and includes a circular hole for lighting. The included 0-10PSI regulator offers good flame control. The height of 24" is perfect for draining directly into a carboy but is also the perfect height to not be bending over when you are adding hops or grain to a kettle. Plus it is kind of cool that the frame is cut and welded in the USA. Included directions will show you how to adjust the propane valve and air intake to achieve efficiency or speed. Adjusted for efficiency the Afterburner produces around 70,000 BTU/hr and in full AfterBurner mode it produces 100,000 BTU/hr. 

Make Your Own Three Burner Brewing System 
But perhaps the best part is how they are designed to bolt together to construct the ultimate stainless brew stand.  Order one now for extract brewing and as your hobby grows your single burner can be built into a three burner horizontal brewing stand.  Or just build a complete stainless brew stand now....for under $1000 you can have three burners, the connecting kits, a handle and casters delivered to your door!

Don't Have Much Room... They Stack!
Wait, there's more. Do you brew in a small space with very little room and don't have space to bolt together a stand? No worries, BrewBuilt burners are also designed to stack. That means you can set up a three burner all grain system in a minute and then store all three in a very small vertical space when done. 

Features:

  • All 304 Stainless Steel Construction
  • Max 100,000 BTU/hr burner
  • Modular system, upgrade down the road to a full BrewBuilt BrewSystem with additional components!
  • Stackable when not in use, saves space in the garage (aka Brewery!)
  • 0-10 PSI Adjustable Regulator
  • Wind Shield on the burner reduces issues with outdoor windy brews (does not help with leaves falling into boil kettle!)
  • Can be upgraded with wheels, handles, or mounted to other AfterBurners to make a full All Grain Brewery
  • 24" Tall, 19.5" Length and Width

NOTE: Due to the size of this item, it is not eligible for international shipping.

 
 
Item # BE200
Shipping Eligible for Free Shipping Program
Availability Item has been Discontinued
Weight 38 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
I have other Brewbuilt equipment that I love.
Nicholas P on May 24, 2021
upgrading my burners
Locke L on Dec 1, 2020
I have other Brewbuilt equipment that I love.
Nicholas P on May 24, 2021
reviews
Jon F on Feb 18, 2021
upgrading my burners
Locke L on Dec 1, 2020
attempting to build a two burner all grain build and this met my needs
James G on May 26, 2020
Fits kettle
Justin C on Apr 15, 2020
Replacing an entry-level burner, this one has more power and like that it is on raised legs.
Robert B on Feb 1, 2020
For our son-in-law
Debi B on Dec 9, 2019
this burner seems just exactly what I need...
DENNIS C. on Sep 18, 2019
why not
Diego C on Aug 28, 2019
i own 5 already
Carlo O on Apr 10, 2019
Heavy duty and works great with a 15gal kettle.
Paul H on Feb 18, 2019
Top quality /great price
Leonard M on Dec 14, 2018
have a bigger kettle
carl e on Dec 3, 2018
because its the best
kyle f on Jul 14, 2018
Nice burner for future addition to brewhouse.
mark g on Jan 26, 2018
reviews
Jon F on Feb 18, 2021
attempting to build a two burner all grain build and this met my needs
James G on May 26, 2020
Reviews

4.5 / 5.0
16 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
6
1
0
0
Rated 5 out of 5
Well worth the extra money
Used twice so far. Easy to adjust the flame. Faster smoother and more stable than the old turkey fryer burners. Looks better too
Compare the old with the new.
User submitted image
May 7, 2021
Purchased
over 3 years ago
Rated 5 out of 5
Two thumbs up
It boils fast. Love it.
June 30, 2020
Purchased
over 4 years ago
Rated 4 out of 5
great burner
awesome burner well built.
September 13, 2019
Purchased
over 5 years ago
Rated 5 out of 5
Can't Go Wrong
Just what I expected a sound investment going to add a second to handle my hot liquor pot and of course plates, handle and wheel's.
User submitted image
Added Apr 16, 2019
April 16, 2019
Purchased
over 5 years ago
Rated 3 out of 5
A bit of a disappointment...
I have no complaints about the stands themselves, but the burners on all three of the stands I received left a lot to be desired. The holes in the casting that the orifice holders thread into were improperly threaded (too large) leaving the orifice holders and air shutters loose and unable to be properly tightened. On one burner, the threads in the casting were so badly oversized that I was able to pull the entire orifice and air shutter assembly out of the casting with a gentle wiggle. On another burner, the orifice itself hadn't been tightened in the orifice holder and had fallen out. I found it rattling around inside the burner. When I checked the other two burners, I found the orifices finger loose in their holders as well. Had I fired that burner with the missing orifice, the results could have been interesting to say the least...

I thought about returning them but having already received three defective burners, I had no reason to believe the replacements would be any better, plus I wanted to BREW, so I just repaired them myself. It's a shame that the quality of these burners is so poor, but I'm really not sure where you'd find any better ones. It seems most of them are coming from China now and their quality standards just aren't up to par with US standards. However, quality and safety are two different things. I wouldn't mind a few minor imperfections in the casting, but I certainly shouldn't have to be re-engineering the critical parts of a burner just to make it safe...

I don't know if everyone else has been receiving the same burners I did or what people are doing to them to make them safe but I'd certainly recommend a close examination of the entire orifice assembly before firing one of these 10" banjo burners, regardless of where it came from. If the orifice isn't threaded snugly in the holder, and the holder isn't threaded snugly into the burner casting, then the burner is dangerous and shouldn't be used until it's repaired.
March 15, 2019
Purchased
over 5 years ago
Response from MoreFlavor
Thank you so much for your feedback. We sincerely apologize for the troubles that were experienced. We try very hard to create the best experience for our customers and provide quality products. The honest feedback provided will help us improve our products. We will look into this matter further and take steps to prevent inconveniences like these from occurring again. Cheers!
March 15, 2019
Tyler W Staff
Rated 5 out of 5
Hot and clean
Burns hot, great control. Burns clean which is quite an improvement over the bbq burners. Helps to make brewing fun again
February 15, 2019
Purchased
over 5 years ago
Rated 5 out of 5
Absolute beast of a burner ! Highly recommend this thing to anyone brewing with propane
January 4, 2019
Purchased
over 5 years ago
Rated 4 out of 5
Well built
Built quality and function of the burner is exactly what I was hoping for. However, a 10 gallon Blichmann pot will hardly even sit on the burner without having to be set dead perfect. The bars that are welded in are not long enough to reach out and securely hold the kettle. I think this is a certain design flaw without letting the customer know. These should be tested on the big 4 kettle makers during R&D.
June 15, 2018
Purchased
over 6 years ago
Rated 5 out of 5
Love it. Handles my 20 gal pot perfectly. It’s very quiet and heats up fast. Don’t bother with anything else
March 6, 2018
Purchased
over 6 years ago
Rated 4 out of 5
Better than my Blickman!!!
February 16, 2018
Purchased
over 6 years ago