Braumeister - 20L - Used

Braumeister - 20L - Used

On Sale!
In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

Condition: Used - Acceptable

This unit is used. It shows wear from use but is in acceptable condition and works properly. It may have cosmetic defects or show other signs of previous use.

Our No Hassle Return Policy is honored however this unit is not covered under our one year warranty policy.

The Braumeister is an all-in-one, electric all-grain brewing system that will ship to you free of charge from MoreBeer!. Made by our long time business associate Speidel of Germany these systems are imported and supported in the USA by MoreBeer!. The Braumeister features an automation and ease of use that is unparalleled in brewing all-grain beer at home. Plus we love the quality of beer produced on these machines. (These units come with European Plugs but be adapted or replaced by an electrician)

Advantages of the Braumeister
First the system is small in footprint and powered by electricity allowing you to brew inside, in a confined space, without the fear of carbon monoxide gas from a flame source. Secondly this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine MoreBeer! agrees.

Walking Through the Brew Process
On Brew Day you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The controller reads in C, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most typical systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. When the mash is complete, another beep will alert you to remove the entire Mash Tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the Mash with hot water or to just add water directly the wort. Push another bottom and the boil starts. You program the length of the boil. When the boil stops insert your wort chiller and cool.

To complete your brew day with some
useful brew day equipment check them out here.

What About Efficiency?
This was our main question because with the Braumeister you are skipping a traditional sparge. The continual recirculation of wort during the mash results in a satisfactory efficiency.

Disadvantages of the Braumeister
You need to have a source of 220v power and the ability to adapt to your 220v outlet. In the USA there are different styles of 220V outlets and unfortunately we will not be able to advise on how to connect it. We strongly recommend you contact an electrician who will be able to make sure you are properly set up. However while there can be an initial set up cost, in the long run you will never run out of propane or have to spend time filling tanks.

Secondly, because of size constraints of the mash tub the largest starting gravity beer you can brew is around 1.060. However, you can always add DME to the boil for an occasional big beer brew.

Buy a Braumeister for the following reasons:

  • Space is a concern.
  • You want to brew "all-grain" inside your house and have access to 220v electrical.
  • Simplicity and ease-of-use is important
  • You are particularly interested in Lager Beers and want to step mash
  • You don't make a lot of high-gravity beers, and are willing to add a little DME when you do.

Technical Specifications for 20L Braumeister:

  • Produces 25L of Wort, which is about 20L finished beer
  • 33 lbs
  • 2000 Watt built in heating capacity
  • 23 Watt pump
  • 26 inches tall
  • 16 inches in diameter
  • 13.2 lb max qty of malt
  • 230V (protection at least 10 amp)
  • These units come with European plugs, but can be adapted or replaced by an electrician


Item # BRA200-UA
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - Out Of Stock
Weight 53 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Is this plus model?
Eric Nachimovsky on Oct 17, 2019
BEST ANSWER: Hi Eric, this is not the plus model. It should also be noted that this is the pre-2015 model.
Is that the actual item pictured? If not, can you post pics of the actual item?
John M Mitchell Jr. on Oct 22, 2018
BEST ANSWER: Hi John - This should be the actual picture, as the 20L has been updated with new aesthetics.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 5 out of 5
Like new
First of all the Braumeister should be the perfect solution for easy brew days. This Braumeister was purchased used. The condition was listed as acceptable, but in my opinion, it was in like new condition. The only thing I found wrong was a slight dent in the lid. I haven't brewed in it yet, but a quick check showed all the functions worked.
February 16, 2019
over 2 years ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
February 18, 2019
Tyler W Staff