Logo
 
MoreBeer!
Brass Barb - 1/2 in. x 1/2 in. FPT
H422A

Brass Barb - 1/2 in. x 1/2 in. FPT

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

 
Item # H422A
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.19 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Why did you choose this?
MoreFlavor Store
Looking to use these with a plate chiller in the same purchase
Michael B on Jun 27, 2022
Looking to use these with a plate chiller in the same purchase
Michael B on Jun 27, 2022
Good evening, I want to use my 10 Gal Ss Infussion Mash Tun with recirculation. Just to be sure: To use the manifold (image 2) i have to install the bulkhead (image 3) and this supplement of image 4 on the inside part. Can I install a 1/2 FPT x 1/2 Barb (image 5) on the other side to connect the 1/2 silicone hose that comes from a pump. Or better asked: Are both threads of this bulkhead 1/2 MPT?
Stefan Mueller on Nov 29, 2020
Brass 1/2
Brass 1/2" fpt x 1/2" barb
10 gal | InfuSsion Mash Tun
10 gal | InfuSsion Mash Tun
Hose Barb | 3/8 in to 1/2 in FPT Knurl
Hose Barb | 3/8 in to 1/2 in FPT Knurl
Bulkhead | Mash Tun & Kettle Re-Circ
Bulkhead | Mash Tun & Kettle Re-Circ
Manifold | Mash Re-Circulation
Manifold | Mash Re-Circulation
BEST ANSWER: Yes, you can use the 1/2 FPT x 1/2 Barb on the outside to connect the silicone hose. However, the inner thread of the bulkhead is not the same as on the outside and the 1/2 barb won't fit there. I am also not quite sure how you are going to use the manifold while having a full tun.
Good evening, I want to use my Ss Infussion Mash Tun with recirculation. Just to be sure: To use the manifold (image 2) i have to install the supplement of image 3 on the inside part. Can I install a 1/2 FPT x 1/2 Barb (image 4) on the other side to connect the 1/2 silicone hose that comes from a pump. Or better asked: Are both threads of this bulkhead 1/2 MPT?
Stefan Mueller on Nov 29, 2020
Brass 1/2
Brass 1/2" fpt x 1/2" barb
Bulkhead | Mash Tun & Kettle Re-Circ
Bulkhead | Mash Tun & Kettle Re-Circ
Hose Barb | 3/8 in to 1/2 in FPT Knurl
Hose Barb | 3/8 in to 1/2 in FPT Knurl
Manifold | Mash Re-Circulation
Manifold | Mash Re-Circulation
BEST ANSWER: Hi Stefan,

I also have the SS brewtech infusion mashtun (20gal)... quick answer to your question is yes the bulkhead supplied with your MT is 1/2” npt so you can use standard npt fittings.

For my set up we connected a 1/2” stainless ball valve on the outside of the MT with a female cam fitting for ease of use and allows for better flow control. Inside the MT we have the hose barb fitting with fpt (the image you have attached) which connects to the Ss recirc manifold accessory. I suggest using all stainless steel fittings.

Hope this helps!
Cheers
Bryan
Reviews

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Rated 5 out of 5
Used in first mash tun
This was my out on low cost mash tun, worked awesome.
May 7, 2013