Beverage Tubing - 3/16 in. ID (By the Foot)

Beverage Tubing - 3/16 in. ID (By the Foot)

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

This is premium beverage tubing that stays flexible even when cold. We use to sell a less expensive tubing but we were not satisfied with the performance on our own draft systems. We think it is definitely worth the little extra cost.

Sold by the foot. 3/16" is the best size for most beer lines under 9' in length. Ideally, 5' provides the correct restriction for serving beer in the 8-14 psi range.

Technical Specifications: 3/16" line provides 2.2 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/16" line holds 1/6 of an ounce per foot. Made from PVC. 7/16" OD

Quantity ordered will be shipped as a single uncut length. Maximum length available is 100 ft.

California Recipients: See Proposition 65 Information
Item # D1700
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 0.13LBS
Size By the Foot
Inner Diameter3/16 in.
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

4.7 / 5.0
40 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
bev tubing
Needed some new tubing to replace old discolored stuff and this did the trick. Thick walled and easy to clean.
May 28, 2015
Great serving hose
I've been using these hoses for years. Use 5 foot length for serving out of kegerator and party tap. 5 feet drops co2 level to about 4 psi perfect for pouring without foam.
May 27, 2015
no problem
This is some strong, flexible tubing.
May 10, 2015
good hose
Good hose, great price
May 8, 2015
Vinyl Taste
Just installed this type of line on a new kegerator system and this tubing causes off flavors in the beer that sits in the lines longer than an hour or so. Pouring off the first 2-3 oz resolves the issue. I have used this type of tubing in my previous kegerator with no issues but the whole length of line was stored in the refrigerator and my new kegerator has part of the tubing stored outside of the refrigerator. So not sure if this was just a bad batch of tubing that lead to off flavors or if the vinyl taste is much more noticable at temperatures outside of refrigerator temps (35-40F). Regardless this product did not work out for me and I will have to upgrade to barrier type tubing.
May 8, 2015
Small diameter but good quality
This is a smaller diameter tubing than I'm used to but the quality is good and the feel of the material is good. I just need to get smaller clamps.....
May 6, 2015
Good Tubing
What can I say, its tubing, its round, has a hole through the middle...I got a bit more than I ordered which is nice and i feel better that its food grade.
May 6, 2015
Nice tubing
I use 7-8 foot of tubing for each keg, and works great!
May 5, 2015
vinyl flavor in beer after two weeks installed
I have had a four tap kegarator for several years now and this is my 4th or 5th time replacing the lines. This is the first time I have experienced a bev line adding a plastic flavor to my beers. I find it necessary to pour off a few ounces to flush the lines of the plastic flavored beer before I can pour a clean beer. I thought this would go away pretty quickly, but after several weeks and a lot of beer being poured (the holidays just ended) I still have to do this. I would not recommend this product. There is nothing worse than having someone over to try a homebrew and having to flush the lines first, or worse having them pour an off-flavored pint before you can warn them.
January 2, 2015
Great Tubing
Great quality tubing. Easy to work with and stays flexible at near freezing temps.
May 27, 2014