This classic German hop has an herbal/floral character and smooth bitterness, making it an ideal choice for brewing lagers, especially traditional pilsners. Hallertau Mittelfruh is one of the original four Noble hops, and is categorized as a "landrace" hop, meaning that it grew and adapted naturally over time in its native region. Its name is derived from the region of Hallertau, the world's largest hop growing region, and the German word mittelfrueh meaning "middle-early", referring to the early middle part of the growing season when it's ready to be harvested. The majority of its oil content comes from Humulene which provides the floral, herbal, and spicy character. Clean, crisp, and perfect for your next pilsner or hoppy lager.
Hop Statistics:
Alpha Acids: 2.0 – 5.5%
Beta Acids: 3.0 – 5.0%
Alpha-Beta Ratio: 0.40 – 1.83
Cohumulone: (% of alpha acids): 23 – 26%
Total Oils in mls per 100 grams dried: 0.7 – 1.3
Similar Hop Varieties: Liberty, German Tradition, Ultra
Due to high demand, the 5 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late October.
Amarillo® hops enjoy a special place of adoration in the hearts of brewers. Often described as a supercharged version of Cascade. Bursting with floral, tropical, and citrus (lemon, orange and grapefruit) characteristics, but it has a distinctive Orange character to it that is very different from Cascade. An excellent choice of super hoppy beer styles like Hazy IPA or West Coast IPA, Pale Ales, or Hoppy Lagers. But really, it's an excellent addition to any beer where you want citrus flavors to pop.
Hop Statistics
Alpha Acids: 8.0 – 11.0%
Beta Acids: 6.0 – 7.0%
Alpha-Beta Ratio: 1.1 – 1.8
Cohumulone: (% of alpha acids): 21 – 24%
Total Oils in mls per 100 grams dried: 1.5 – 1.9
Similar Hop Varieties: Cascade, Centennial, Simcoe®
Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC.
Tettnanger, or Tettnang, hops are a traditional German variety that is widely used in lagers. Tettnanger hops are known for their versatility, as they offer a traditional noble aroma that blends seamlessly with other hops in your brew. Expect that classic German nose of spice, earth, and a hint of floral commonly added to German Ales, Lagers, and Wheat Beers.
Hop Statistics:
Alpha Acids: 2.0 – 5.0%
Beta Acids: 3.0 – 4.5%
Alpha-Beta Ratio: .89 – 1.67
Cohumulone: (% of alpha acids): 20 – 25%
Total Oils in mls per 100 grams dried: 0.4 – 0.8
Similar Hop Varieties: Santiam, Spalt, Fuggle
1.7-2.6 °L - Viking Malt - Viking Wheat Malt is produced from spring wheat. Wheat goes through all the same process steps as done with barley malting. Anyway, some special attention is needed during the germination because the shape of wheat kernels may promote very dense bed formation. Also the fact that the root let growth is modest keeps the wheat bed very tight. Due to this the temperature of the bed tries to rise easily. Especially during summer times there should be enough cooling capacity to perform controlled germination. Kilning end temperatures are in the area of 72-80C.
Viking Malt’s Wheat Malt is well modified malt giving easiness in the brewing process. There is enough “everything” and it works well in high percentages giving its own amylase activity into the brew. The Viking Malt Wheat malt gives good flavor with low coloring values. The extract content is high.
In 2016 Viking Malt and Danish Malting Group joined forces to better serve their customers. Now the new Viking Malt is the leading malting company in Northern Europe and supply raw materials and services to the global brewing, distilling and food industries. Viking Malt has 6 malthouses in areas where our distinctive Nordic barley is sourced: in Halmstad, Sweden; Vordingborg, Denmark; Lahti, Finland; Panevezys, Lithuania and in Sierpc and Strzegom, Poland. The annual malting capacity is close to 600 kilotons.
Malt Specification:
Moisture % - max. 6.0
Extract fine % dm - min. 82.0
Color °L - 1.7-2.6
Protein % dm - max. 13.0
Sol. nitrogen mg/100 g - max. 800
Free amino nitrogen mg/l - 90-150
Viscosity mPas - max. 2.0
Diastatic power WK dm - min. 250
See the Documents tab below for Product Information and Typical Analysis.
Magnum is a great bittering hop with an aroma similar to a strong Willamette. It therefore works well with Willamette, Fuggles, and British Kent Goldings when used as an aroma hop in later boil additions. Magnum makes an incredibly useful bittering agent in just about any beer, and due to its very smooth bitterness, you can really use as much as you want.
Clean smooth bitterness with a slight floral/fruity aroma. This German variety generally has a higher AA content than US Magnum. This is the main high alpha variety grown and used in Germany. Fantastic hop to use for bittering.
Hop Statistics:
Alpha Acids: 11.0 – 16.0%
Beta Acids: 5.0 – 7.0%
Alpha-Beta Ratio: 2.2 – 3.2
Cohumulone: (% of alpha acids): 21 – 29%
Total Oils in mls per 100 grams dried: 1.6 – 2.6
Storage(% alpha acids remaining after 6 months storage at 68° F): 80 – 90%
Similar Hop Varieties: Taurus, Nugget, Columbus
A great aroma hop for German beers. Also known as Hallertauer Tradition, this hop has a super clean floral and herbal aroma which will go great in any German lager! This hop was originally bred at the Hull Hop Research Institute in Germany for it's resistance to disease, and now it is a defining hop in a number of the region's Pilsners and Hefeweizens.
Hop Statistics:
Alpha Acids: 5.0 – 7.0%
Beta Acids: 4.0 – 5.0%
Alpha-Beta Ratio: 1.0 –1.75
Cohumulone: (% of alpha acids): 26 – 29%
Total Oils in mls per 100 grams dried: 1.0 – 1.4
Storage(% alpha acids remaining after 6 months storage at 68° F): 65 – 70%
Similar Hop Varieties: Liberty, German Hallertau Mittelfrüh
This bottle brush design has stood the test of time.
This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out!
Includes circular metal loop for hanging.
Bristles are 2.75" in diameter with an overall length of 16"
A traditional German hop with a mild and pleasant character. This is grown only in the Spalt region of Germany (thus the name!) and will impart a flowery, fruity, and spicy aroma. This is generally used as an aroma hop late in the boil, and will provide a distinctly hoppy character to the beer brewed!
Hop Statistics:
Alpha Acids: 2.5 – 5.5%
Beta Acids: 3.0 – 5.0%
Alpha-Beta Ratio: 0.5 - 1.8
Cohumulone: (% of alpha acids): 20 – 25%
Total Oils in mls per 100 grams dried: 0.9 – 1.4
Storage(% alpha acids remaining after 6 months storage at 68° F): 50 – 60%
Similar Hop Varieties: Saaz, Tettnang, Spalter Select
Convenient, easy, and simple – just the way cleaning should be. Never guess about how much cleaner you should be using with Craft Meister Keg & Carboy Cleaning Tablets, the easiest way to clean your dirty gear. Just fill the dirty keg or carboy with hot water, add Tablets and let them do the work for you! Similar to laundry detergent pods and dishwasher tablets, these handy Tablets are not only easier to use than bulk powder, they may be more cost effective over time by ensuring you use the correct amount of cleaner every time. Keg & Carboy Cleaning Tablets are a mix of powerful alkaline and oxygen detergents providing a one-two punch to knock out soils and build-up. Safe for use on glass, plastic, and stainless steel. Stir lightly to dissolve tablets. Use a brush or repeat for stubborn soils. If you are looking for a cleaner that works in cold water, or where you want it to sit overnight, we recomment you check out Craftmeisters Alkaline Brewery Wash. Directions: Carboy cleaning: Fill carboy with HOT water Add 2 tablets per 3 gallons of water For heavy soils, use 1 extra tablet per carboy or soak longer (up to 24 hours) Soak for at least 60 minutes Rinse thoroughly, then sanitize Keg cleaning: Fill keg with HOT water Add 1 tablet per 3 gallons of water Soak for at least 60 minutes Rinse thoroughly, then sanitize
From the Hop Research Center in Hüll, Germany, Ariana was developed from a cross breeding of Herkules and an unspecified wild male hop. Although it has a high enough alpha acid content to be used for bittering, Ariana's oil content makes it an ideal choice for aroma additions and dry hopping. The aroma profile is dominated by sweet, tropical fruit notes of pineapple and passion fruit, along with citrus and berries. A delicious addition to your next Pale Ale, IPA, or Hazy.
Hop Statistics:
Alpha Acids: 10.0 – 13.0%
Beta Acids: 4.5 – 6.0%
Alpha-Beta Ratio: 1.66 – 2.88
Cohumulone: (% of alpha acids): 40 – 42%
Total Oils in mls per 100 grams dried: 1.6 – 2.4
The ultimate plastic pressurized conical
A best seller for a reason! Tons of features at an incredible price
Cyrstal clear super smooth PET makes fermenting and cleaning super easy
3" Butterfly valve at bottom makes removing yeast / trub easy with the 600mL collection jar
Pressurizable (with accessories) for fermentation and closed transfer to your keg
The Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top & bottom PCO1881 ports. The collection container has a 3" T.C. opening and installs on the Conical with a 3" T.C. butterfly valve. The molded 3" T.C. ferrule on the tank is a huge improvement over the Gen 2 model—eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla!
NOTE: The primary example photo shows the collection container from the Gen 3 FermZilla.
Out of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go—adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter.
Pressure Kit
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
Tri-Clamp Pressure Lid
Add a 2" T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for Ball Lock Caps, as well as undrilled ports for an optional Thermowell and Temp Twister cooling coil.
Hop Bong Pressure Pack
The ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
FermZilla Gen 3 vs Gen 3.2:
3" x 3" T.C. butterfly dump valve
3" T.C. compatible collection container
600 mL collection container w/ top & bottom PCO1881 threaded ports
What's Included:
FermZilla 55L Tank with 3" T.C. Bottom Port
3" T.C. Butterfly Valve
600 mL Collection Container with 3" T.C. Connection
Stainless Steel Stand with Swing Handles
Stainless Steel Handle Assembly
Top Lid with PRV (35 psi)
3" tri-clamp with gaskets
3-Piece Airlock
Graduation Sticker
Adhesive Thermometer
Spare Seals
Specs:
55 L (13.2 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Height in Stand - 41.5"
Height w/ Airlock - 45.1"
Tank Diameter - 13.9"
Diameter in Stand - 15.3"
Lid & Collection Container Ports - 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:
Fill the tank to the brim with water
Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.
General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.
KegLand Part number: KL25904
NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
FermZilla Tri-Conical 27L & 55L | User Guide
One of the quintessential English hops, Fuggle is prized for its earthy, floral, and understated fruit characteristics. Primarily used as an aroma hop, it will give your beer a "British" flavor that is distinct from the popular Northwestern varieties like Cascade, Centennial, Columbus or Chinook. Fuggle is generally associated with delicate and pleasant mint, grass, and floral tones. Fuggle is a fine choice when making any English Ales, including Bitter, ESB, Pale Ale, Stout, Strong Ale, Cask Ale, and many more.
Hop Statistics:
Alpha Acids: 3.5 – 6.5%
Beta Acids: 2.0 – 4.0%
Alpha-Beta Ratio: .88 – 3.25
Cohumulone: (% of alpha acids): 25 – 32%
Total Oils in mls per 100 grams dried: 0.7 – 1.2
Similar Hop Varieties: Goldings, Willamette
The stick on thermometer is great for monitoring the temperature of refrigerators, fermentation and storage areas, and other spaces. It is relatively small (4 " tall), and includes a sticky tape back to secure to a wall or other fixture. Range is -40 - 120 degrees F (-40 to 50C).
Characterized by notes of citrus, specifically orange, alongside tropical hints of mango and guava
Performs well in a wide range of beer styles and hop combinations
Aroma Profile: Berry, Citrus, Stone Fruit, Tropical, Woody
Alpha Acids: 10.0 – 14.0%
T-90 Hop Pellets
Released by the Hop Breeding Company in 2024, Krush™ HBC 586 c.v. offers a complex and punchy aromatic profile. This hop variety is characterized by notes of citrus, specifically orange, alongside tropical hints of mango and guava. Stone fruit qualities, reminiscent of peach, are also present, complemented by berry notes described as mixed berry, and a woody, resinous undertone. These characteristics are evident both on the bine and in the finished beer. Described as a fruit cocktail in cone form, Krush™ is a highly unique and versatile hop that delivers significant impact. It has become a favorite among brewers and performs well in a wide range of beer styles and hop combinations.
Originally bred in 2007 by the Hop Breeding Company experimental hop variety program, Krush™ HBC 586 went through a thorough 17-year process as an experimental variety and was officially released as a commercial hop brand in 2024.
Hop Statistics
Alpha Acids: 10.0 – 14.0%
Beta Acids: 7.0 – 9.0%
Alpha-Beta Ratio: 1.1 – 2.0
Cohumulone: (% of alpha acids): 34 – 40%
Total Oil: 0.5 – 3.0%
Krush™ is a trademark owned by Hop Breeding Company.
Welded 1.5" tri-clamp ports for a lifetime of leak-free use
Front & back positioned handles reduce the space needed to arrange multiple kettles in a horizontal system
304 stainless steel construction with mirror polish finish
Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories
Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations
The Boil Kettle comes without fittings
The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe
The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe
Add your preferred Valve Hardware Pack below under You Might Also Need or purchase your own valve & fittings separately
Designed for Brewing. Built to Last.
BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.
Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.
Configurations
The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place.
The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer.
The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer.
Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately.
This Brew Kettle has a lot to offer...
Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.
Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.
Mirror Polish Finish
The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.
Size Ratios and Stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.
Features:
Two welded T.C. couplers for a lifetime of leak free use
Front & back oriented handles with silicone coated handles for heat protection
Notched lid with silicone plug for flexibility
304 stainless steel construction for longevity
1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting
4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching
Internally etched volume markers from top to bottom for easy reading
1.2:1 Ratio is optimal for boiling evaporation rate
Lid is designed to conveniently hang from a handle
Stainless handles with stainless rivets for secure lifting
Size
Kettle ID (in.)
Height (in.)
10 Gallon
13.78
16.54
15 Gallon
15.75
18.90
20 Gallon
17.72
21.26
30 Gallon
19.69
23.62
50 Gallon
23.62
28.30
If you're looking to spice up your next batch of porter or stout, look no further than the ever-tantalizing Boadicea hops. With just enough alpha acids to provide a round bitterness, Boadicea will contribute a lovely earthiness and floral character with a hint of spice and resin. While you may instinctively reach for the British Kent Goldings (BKG) when it's time to brew an English-style pale or IPA, we highly recommend giving this humble hedgerow hop from the UK a shake. Typically added late in the boil or during dry hop. Boadicea was first bred by Peter Darby at Horticulture Research International at Wye College in Kent, England where it was hailed as the world's first hop variety to be naturally resistant to aphids.
Hop Statistics
Alpha Acids: 6.0 – 9.0%
Beta Acids: 3.0 – 4.0%
Alpha-Beta Ratio: 1.5 – 3.0
Cohumulone: (% of alpha acids): 21 – 27%
Total Oils in mls per 100 grams dried: 1.4 – 2.0
Neo1 absolutely bursts with bright lemon-citrus flavor and tropical notes. This dual-purpose hop will contribute a decent amount of bitterness when added early to mid-boil, but plays well as a late boil or dry hop addition. This neomexicanus hop is a sister of Amallia.
Hop Statistics
Alpha Acids: 6 – 9%
Beta Acids: 3 – 4%
Alpha-Beta Ratio: 1.5 - 3.0
For use with stopper and airlock on 6 gallon bucket. Comes with 1 3/8" hole which fits a #6 or universal stopper.
Please Note: Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Quickly and easily add decorative heat shrinks to wine bottles. Horizontal Heat Shrink units make it easier to center the bottle neck inside the heating element, and are safer to use due to the shielding around the heating element.
Features:
700W Heating Element
Enamel Coated Body
Height Adjustable Heating Element adapts to different bottle diameters
110V with on/off switch.
2.25 in Coil Diameter
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers.
4 Built-in pumps and digital controllers
Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet
Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet
Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
Far from your average coffeemaker, the Brazen Plus is a fully customizable unit allowing for total control over your brew.
The Brazen Plus brew system has features not found on any other consumer coffee maker. Settings are adjustable for water brewing temperature and pre-soak like found on many commercial brewers. Set your brewing temperature between 190–210°F / 90–99°C with accuracy to within 1-degree Fahrenheit. A patented feature allows temperature calibration with altitude correction. The oversized shower head and pulsed water flow ensure complete coffee bed saturation for terrific coffee extraction. Permanent filter included or use paper filters. Thermal carafe (SCA approved) with brew through lid keeps coffee hot. The Brazen Plus 3.0 is one of the very few that meet the Home Brewer certified by the Specialty Coffee Association of America to their standards.
3.0 Updates:
New Universal System Power Boards
New Program: revised Pulse Water Release Timing for better extraction
New Micro Controller: faster data refresh
Features:
Capacity: 1.2 Liter, 40oz, 8 (5oz) cups
Temperature Control: Set brewing temperature from 190–210°F (90–99°C)
Programmable Brew Start Time: Wake up to coffee with timed brew setting
Ideal Coffee Extraction: Coffee grounds are fully saturated due to oversized showerhead and pulsing of the water flow.
Elevation calibration: Adjust your brew temperature based on elevation to achieve a hot cup of coffee regardless of how far above sea level.
Thermal carafe with brew through lid keeps coffee hot (SCA approved)
Pre-soak setting allows the coffee to bloom before brewing for better flavor
Stainless steel water reservoir that’s easy to fill
Permanent gold filter included or use paper filters (10 cup for max benefit/ extraction)
Memory save: Settings remain, even if the power goes out.
Sleep mode: Saves power when not in use
5-gallon Ball Lock Keg made from beverage-grade 304 stainless steel.
Ideal for beer, cider, kombucha, cold-brew coffee or any other beverage you want to serve on draft.
Single steel handle provides easy mobility while keeping the in & out posts clear for connection.
Rubber boot bottom won't scratch up the floor of your kitchen or home bar area.
Manufactured in an ISO 9001-certified facility with robotically welded seams for superior quality.
The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve your home bar patrons on draft. These ball lock kegs are built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. The single steel handle is positioned away from the ball lock posts, so you'll never have trouble connecting or routing your draft lines. The rubber boot bottom allows you to move your kegs around without fear of scratching up your floors, which is especially nice if your kegerator setup is on hardwood floors, and they can be stacked on top of other homebrew kegs with a rubber top. Comes with a standard corny keg lid with pull ring PRV, providing both manual and automatic pressure relief.
Specifications:
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
Single Ergonomic Steel Handle
Rubber Boot Bottom
ISO9001 Quality Assurance
NSF Approved
Made from 304 Stainless Steel
25.25" H x 8.75" D
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
The Megamouth Torpedo Keg series features an extra-large lid opening for easy cleaning
Brand new, all-stainless construction ball lock keg
Stackable with ball lock quick disconnects in place
Etched In and Out labels near the keg posts for easy identification
Rolled handles for a comfortable grip
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg.
Quality First
Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer.
Cool Features
Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.
Overall for the price and quality, along with free shipping from MoreBeer!, the Torpedo Keg is an amazing value!
Specifications:
Mouth Opening: 5.8" L x 4.8" W.
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
ISO9001 Quality Assurance
Made from 304 Stainless Steel
Dimensions:
Height (in.)
Diameter (in.)
3 Gal
13.4
11.4
5 Gal
17.9
11.4
6 Gal
20.5
11.4
10 Gal
30.3
11.4
Perfect for fermenting small batches of beer, kombucha, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Includes S-shaped airlock and airlock grommet
This fermenter kit is great for those small one gallon batches. Whether you enjoy brewing small batches or want to test things on a small scale this is a great glass fermenter. This is also a great fermentation setup for making homemade kombucha!
Includes:
Glass 1 gallon jar
Screw top lid with hole and airlock grommet
S-Shaped airlock
Counter top inline keg dispenser that can serve ice cold beer from unchilled kegs Compact and portable. Use anywhere you have access to 110V power Superior cooling capacity. Chill up to 8 gallons of beer, inline, per hour! Fill the reservoir with tap water, or use a glycol solution for optimal performance NukaTap Flow Control Faucets, tap handles, and drip tray included Great for bars, restaurants that need to add capacity These style chillers are how beer is poured in most European cafes If you're looking for a home draft system, but don't have the space for a kegerator or keezer, we've got the answer! The KOMOS KRYO benchtop keg dispenser can serve ice cold beer from unchilled kegs. It's essentially an electric jockey box that chills beer inline as it passes from the keg through the internal draft coils that sit submerged in the glycol reservoir. Simply place it on your counter or benchtop, fill the reservoir with a 20% glycol solution, and hook up your keg to the draft shank bulkheads. In roughly an hour, the reservoir will have cooled down enough that you'll be ready to pour! And thanks to the compact size, the KRYO can easily be transported from your home to the next backyard BBQ, cabin trip, wedding, or virtually any gathering of thirsty people you can think of. For homebrewers this would allow you to keep your refrigerator at fermenation temperatures while always seving your beer ice cold. Glycol Reservoir Although you can fill the reservoir with water only, for optimal performance we highly recommend using a glycol/water mix so you can lower the chilling solution below freezing. You simply won't be able to get your beer as cold if using water only. The sight gauge at the front will let you know if it's time to top up the reservoir, but also functions as a drain. When it's time to move the KRYO from one location to another, drain out the glycol into a sealable container to avoid spills during transportation. The glycol reservoir provides an exceptional amount of cooling power that makes it perfect for servicing small bars or cafes, as well as home use. If you're deciding between this model and the KRYO Nomad, note that peak chilling capacity for this model is approximately 8 gallons per hour, whereas the Nomad can chill up to roughly 2 gallons per hour. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Draft Shank Bulkheads The draft shank bulkheads with beer thread allow you to choose the type of fittings and draft line that best suits your needs. We highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. These Duotight Female Beer Thread Adapters will allow you to hook up 8 mm OD EVABarrier, and also work with sanke keg couplers if you'll be dispensing commercial kegs. For homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 8 gallons of beer per hour (based on 68°F ambient) Draft shank bulkheads compatible with Duotight fittings or nut & tailpiece combos STC-1000 temperature controller (reads in °C) Reservoir volume: 4.2 gal Voltage: 110V-120V Current: 0.9A Frequency: 60Hz Dimensions: 19" x 12" x 17.5" (not including faucets / drip tray) CE Certified Reservoir Temp Controller: Follow these steps to adjust the SET temperature on the controller. If using water only, be sure to keep the reservoir temp set at or above 2°C to avoid freezing. With a 20% glycol solution, you can set the temp as low as -2°C. The reservoir volume is 4.2 gallons, so you will only need to purchase 1 gallon of glycol to make a 20% mix. Hold the 'Up" button for 3 seconds until the number is flashing While the number is flashing, press the 'Down' button to decrease the set temperature or press the 'Up' button to increase the set temperature. Wait 3 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer.
Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir. The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.
16.5" L x 16" W x 21.25" H
Nozzle diameter: 12 mm (0.472441 inch)
The Megamouth Torpedo Keg series features an extra-large lid opening for easy cleaning
Brand new, all-stainless construction ball lock keg
Stackable with ball lock quick disconnects in place
Etched In and Out labels near the keg posts for easy identification
Rolled handles for a comfortable grip
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg.
Quality First
Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer.
Cool Features
Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.
Overall for the price and quality, along with free shipping from MoreBeer!, the Torpedo Keg is an amazing value!
Specifications:
Mouth Opening: 5.8" L x 4.8" W.
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
ISO9001 Quality Assurance
Made from 304 Stainless Steel
Dimensions:
Height (in.)
Diameter (in.)
3 Gal
13.4
11.4
5 Gal
17.9
11.4
6 Gal
20.5
11.4
10 Gal
30.3
11.4
Cork up to 400 bottles per hour with the StarCap pneumatic corking machine
Air-driven semi-automatic bottle corker makes the process efficient and effortless
Compatible with all natural, agglomerated, collated, and 1+1 agglomerated corks
Air pressure regulator with manometer allows for pressure adjustments depending on the cork being used
Made in Italy by Tenco
The StarCap semi-automatic bottle corker from Tenco provides excellent corking capacity for small wineries or avid home vintners. It is pneumatically driven so you will need an air compressor to operate the corking action. Wine corks are manually inserted into the cone then, by pressing the two start buttons, the cork is inserted into the bottle neck of the wine bottle by slightly compressing the cork. The StarCap machine guarantees perfect integrity, doesn’t create seems on the surface, and doesn’t affect the material in any way.
Specifications:
Capacity: 400 bottles/hour
Power: Compressed Air
Air Connection: Push-to-connect fitting for 8mm (5/16") OD rigid tubing
Can be converted to barb with 1/4" BSPP male threaded adapter
Max Diameter: 25 mm
Max Height: 45 mm
Minimum Bottle Height: 200 mm
Max Bottle Height: 370 mm
Compatible Corks: Natural, agglomerated, collated, 1+1 agglomeration
Vacuum pump wine bottle filler with 180 bottle per hour filing capacity
Automatically starts siphon and shuts off when the bottle is filled
Oxygen is evacuated from each bottle before filling
Adjustable fill speed to match your preferred pace
Fill wine bottles directly from your fermenter, storage tank, or barrel
The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use.
110V 60 Hz 60 W
Condition: Used - Good
This unit is used. It shows wear from use but is in good condition and works perfectly. It may have cosmetic defects or show other signs of previous use.
It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit!
The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter.
The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Optional Draft Towers
Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you!
Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.
Optional Faucets
The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable.
For more info on each faucet option, check them out below the description.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 26 - 82° F temp range.
Robust MKIII CO2 Regulator included
Pre cut hole on top perfectly sized for 3" diameter tower
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Drip Tray is removable for easy cleaning
Aluminum floor panel for additional keg support
Rolling casters
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
Available Kegerator covers and "off road" casters for moving over uneven terrain.
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall
35" with Caster wheels
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
The Ercole electric capper by Ferrari is the perfect fit if you are a small microbrewery or an obsessed homebrewer who loves great equipment. Simply plug the unit in and it is ready to use. No compressor needed, which means it is completely silent! The capper is activated by pushing both drive buttons at once, which is a safety feature to keep your fingers out of the way of the capping action. Provides a perfect seal everytime. Made in Italy by Ferrari.
Instructions:
Place the bottle on the base, taking care to align the neck of the bottle and the capping head
Insert the crown cap under the head, a magnet will hold the cap in place
Put both hands on the drive buttons located at the sides
Press both drive buttons simultaneously until the cap is fully attached
As soon as the bottle is capped, release both buttons and remove the bottle
Features:
Caps bottles with max height of 15" (38cm), max diameter of 5.7" (14.5cm)
Includes two capping heads, one for standard American 26mm caps and another for European 29-31mm caps
The European capping head can also be used with smooth or finned plastic T-stoppers
Dimensions: 24.5"H x 7.5"W x 9"D
Weight: 30 lbs
110V
Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir. The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.
16.5" L x 16" W x 21.25" H
Nozzle diameter: 12 mm (0.472441 inch)
Welded legs and solid lever offer extra stability when corking wine bottles Much easier and faster to use than hand held or bench mounted models Also compatible with Belgian Corks Made in Italy by Ferrari This Italian Floor Corker gives you the leverage you need to easily compress and insert corks in your wine bottles. Much easier and faster to use than hand held or bench mounted models. Ships boxed and requires no assembly. Adjustable nut on plunger allows you to change the height of the cork in the bottle. Works well with our Belgian Corks, too! This unit comes with welded legs and solid lever. Also available in a model that can be broken down for easy storage (W540). Please Note: This corker is not suitable for use with synthetic corks, as the corker will crease the side of the cork during insertion which leads to a leak once the bottle is laid down for storage. See W408 if using synthetic corks. Min. Bottle Height: 9 in. Max. Bottle Height: 15 in. Min. Cork Size: 22x38mm Max. Cork Size: 30x45mm Height: 35.43" Length: 24.8" Width: 17.75" Weight: 17.6 lbs
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late May.
Compact chiller with commercial level cooling power
Maintain fermentation temperatures, cold-stabilize insulated tanks, or maintain storage temperatures
Position inside the winery or outside in a covered position
Fill from the exterior without the need to remove covers or panels
Program and monitor temperatures via the digital controller
Made in Germany by Kreyer
This Chilly45 unit allows you to easily cool your ferment temperatures, cold-stabilize smaller insulated tanks, or maintain a wine tank storage temperature. This unit can be used inside the winery or placed in a covered position on the outside of the winery. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment.
Ready to go - fill with water or a water/glycol solution and plug in. They are equipped with an efficient scroll-type compressor.
Note: This unit runs off 220V single phase power. It will not run off 208V.
Uses
Cooling of must for cold soaks, slow starting ferments
Stabilization of tataric crystals
Controlling fermenting temperatures
Maintaining storage temperatures in tanks/barrels (ask about our barrel snake!)
Features
Sheet metal housing, electrolitic galvanized high surface quality, powder-coated and abrasion-resistant encasing cover that is easily detachable
220v single phase 60Hz 14 amp supply voltage
1.28 tons (15,000 btu) of cooling power
30L/8G Insulated Plastic tank to hold water or glycol
Easy to fill from outside
Centrifugal recirculation pump made by Speck.
Digital Thermostat
Integrated pump pressure switch allows unit to work with digital automatic temperature controlers on multiple tanks.
NEW Micro Channel evaporator is quieter, more efficient and uses 30% less cooling gas.
High Tech, Scroll-type, efficient, low noise compressor
Non-Ferrous water circuit - No Rusting!
Outlet is 3/4" MPT, which accomodates hose fittings with gaskets, and includes a 1/2" barb fitting
29.75" Length
23.6" Width
19.68" Height
All units pass multiple tests prior to shipment
6 Month Electrical Warranty
1 Year Mechanical Warranty
CE Certified
Need a small glycol system designed for your needs? Contact Morebeer! Pro at info@morebeerpro.com or MoreWine! Pro at info@morewinepro.com
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Ratcheting basket press with wood basket
Classic design offered at an affordable price for home & professional winemakers alike
Made with pressed steel basin with an enamel coating
Wooden basket disassembles into 2 pieces for easy removal of the pressed grapes and cleaning
22-gallon capacity
Made in Italy by Marchisio
MoreWine! presents the classic, affordable wine press for the home user. Wood slats on the side with a painted base and stand.
Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism.
The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.
#45 specifications:
Basket diameter: 18 inches
Basket height: 24 inches
Basket capacity: 22 gallons
Ship weight: 189 pounds
Manufacturer: Fratelli Marchisio (Italy)
New Corny Keg ready to use right out of the box New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Lid includes a tab wth hole welded in so you can hang anything from lid (dry hop our favorite) 304 Stainless Steel and great welds, this will last a tifetime Features Low2 Keg Lid O-ring which offers a 96% reduction in oxygen ingress compared to silicone Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! Brand new 5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! Features: Ball lock 130 PSI Operating Pressure 5 Gallon (19 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel Dimensions: Height: 24.75 in. Diameter: 8.375 in. Kegland Part Number: KL0289
Vacuum bottle filler for use with wine, olive oil, or uncarbonated beer
Air is cleared from each bottle before filling, reducing oxygen exposure
Adjustable fill nozzles and support rack to fit your bottle size and fill level
Variable fill speed to match your bottling pace
High-quality 304 stainless steel construction
Made in Italy by EnoItalia
We like this robust vacuum filler from EnoItalia because it combines the low oxygen benefits of vacuum filling with the strong fill nozzles and frame of traditional Italian bottle fillers.
This high-quality vacuum filler is the ideal choice for bottling uncarbonated beer or wine with minimal oxygen exposure. Air from the bottle is automatically extracted through the filling head and then liquid is drawn through the system and into the bottle via a vacuum pump. This greatly reduces the oxygen exposure that occurs with other fillers. The support rack and fill nozzles are adjustable so you can adapt it for your bottle size and desired fill level. Fill speed can also be adjusted with the digital display and vacuum regulator, allowing you to quickly set the desired vacuum level for each product. After each bottle is filled, excess liquid is returned to the cylinder. When the cylinder fills up, the stainless steel float will rise and shut off the vacuum pump.
Designed entirely in stainless steel with high-quality components, this filler was designed to stand up to intensive, professional-level use.
This unit is only intended for use with still beverages. It is not compatible with carbonated beer, cider, or sparkling wine.
Features:
304 stainless steel construction
Digital adjustment display
1.5" tri-clamp for product aspiration and circuit emptying
DIN 15 connections for emptying filling nozzles
Adjustable support rack
Adjustable feet
Lifting handles
Capacity: 650 lt/h (171 gal/h)
Power: 110V / 60 hz
Please note: this unit comes with a bare cord. You will need an electrician to wire the appropriate plug.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Eliminate the labor-intensive, time-consuming process of removing pits from stone fruit by hand Remove pits and seeds and break down fruit into a puree in one pass Adjustable inner blades can be fine-tuned to maximize efficiency for the particular fruit you're processing Standard basket is sized for most plums, apricots, and smaller peaches Alternate baskets are available to adapt the unit to other fruits 1,200 lbs per hour processing capacity Made in Italy by EnoItalia Put the Delta Zero to the task and stop removing pits by hand! Working with stone fruit can be a daunting task for any winery, brewery, or cidery simply due to the labor-intensive, time-consuming process of removing the pit from each fruit by hand. The Delta Zero makes this process incredibly easy and efficient, with the ability to process up to 1,200 lbs of fruit per hour. As fruit feeds through the unit, the stone is removed and the fruit is broken down into a puree that is ready to use. Say goodbye to canned purees and extracts! Now you can work with fresh fruit without the headache. The Delta Zero Destoner is made from 304 stainless steel and suitable for most small productions. The machine completely separates the pulp from the inner stone and simultaneously crushes the fruit, creating a final product suitable for fermentation or making fruit juices and jams. Furthermore, the inner blades are adjustable to maximize the efficiency of the particular fruit you are processing. The standard basket has 6 mm diameter holes, which is perfect for most plums, apricots and smaller peaches. Alternate baskets with different hole sizes are also available, allowing it to be used with multiple food products including cherries, plums, apricots, elderberries, aronia, etc. See the chart below basket recommendations. For processing larger stone fruit, such as peaches, we recommend the Delta 1 Destoner Pulper . Features: 304 Stainless Steel Construction
220V / single phase / 1.5 HP Motor
5 amps
Internal basket with 6 mm holes for Apricots, Plums and Smaller Peaches
Process up to 1,200 lbs per hour
Emergency stop and CE electric panel
Dimensions: 43.3 "L x 25.6" W x 51.2 "H
Weight: 176 lbs
Diameter Recommended Use 0.6 mm Berries, apples, pomegranates, strawberries 0.8 mm Berries, apples, pomegranates, strawberries 1.2 mm Tomatoes 1.5 mm Tomatoes 2 mm Olives 3 mm Cherries 6 mm Plums, apricots, small peaches 8 mm Peaches Please note: the unit may come pre-wired with a US-style 110V plug, which will need to removed and re-wired with a 220V plug.
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Made of food grade plastic, this 12 gallon wine fermenter is great for grapes and will hold around 75 lbs of must.
Dimensions: 21” tall x 15” wide at top tapering to 12.5 at bottom.
Semi-Automatic Precision: Delivers a consistent, professional-grade seal in just 3 seconds, eliminating manual lever variability and operator error.
Universal Versatility: An adjustable platform fits standard 202 cans (12–16 oz) and can be adapted for 32 oz Crowlers or tin-plated food cans.
Durable & Safe Design: Built with rust-resistant 304 stainless steel and a low-voltage 24V DC motor for maximum safety in wet environments.
Compact Efficiency: A space-saving benchtop unit designed for easy one-person operation, making it ideal for homebrewers and nano-breweries alike.
Superior Freshness: Provides an airtight, 100% light-proof seal to prevent oxidation and keep your beverage carbonated longer than traditional bottling.
Power supply sold seprately. See below under You Might Also Need.
The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple.
Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.
The Cannular Pro guarantees a perfect, repeatable seal by automating the seaming process. By eliminating the manual lever, it removes operator variability and ensures consistent pressure for every can.
Key Features
Semi-Auto Precision: Effortless operation that delivers a uniform, professional-grade seam every time.
Universal Compatibility: Designed for all standard 202 cans, including 12 oz, 16 oz, 330 ml, and 500 ml sizes.
Adjustable Platform: Features a built-in adjustable table to accommodate various can heights—no additional spacers required.
Customizable Pressure: Easily fine-tune the platform height to ensure the ideal amount of sealing pressure for any batch.
The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminum cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon).
The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately.
Operation:
The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:
Place lid atop the can and place the can on the table spacer
Turn the platform lever clockwise to raise the can to the seamer
Press the seaming operation button then wait for the can to stop spinning
Turn the platform lever counterclockwise to lower the can
That's all there is to it!
Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.
Power:
As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans.
Why Cans?
So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!
Specifications:
Power: 250W 24V DC
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Dimensions: 16" L x 9.5" W x 21" H
Weight: 40 lbs
Splash guard not included
Max Can Height: 7.75" (197mm)
Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order.
Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and you can expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.
KegLand Part Number: KL15769
Cannular Compact Semi-Auto Canning Machine | User Guide
The HI83749 Portable Turbidity and Bentonite Check Meter ensures protein stability before bottling for great quality wine. The HI83749 measures turbidity of samples from 0.00 to 1200 NTU (Nephelometric Turbidity Units) and is USEPA compliant.
Log and transfer up to 200 measurements.
GLP (Good Laboratory Practice) feature for traceability of the calibration conditions.
Great for small & medium wineries and advanced hobbyists.
The HI83749 Portable Turbidity and Bentocheck Meter is specially designed for measurement of turbidity in wine. The instrument is based on a state-of-the-art optical system which guarantees accurate results, assures long term stability, and minimizes stray light and color interferences. It also compensates for variations in intensity of the lamp, although proper calibration ensures measurements are fully validated, comparable, and in compliance with regulatory requirements. The 25 mm round cuvettes composed of special optical glass guarantee the repeatability of turbidity measurements.
Features at-a-glance
AMCO AEPA-1 Primary Turbidity Standard - The AMCO AEPA-1 supplied standards are recognized as a primary standard by the USEPA. These non-toxic standards are made of styrene divinylbenzene polymer spheres that are uniform in size and density. The standards are reusable and stable with a long shelf life.
Calibration – A two, three, or four-point turbidity calibration can be performed by using the supplied (<0.1, 10, 100, and 500 NTU) standards. Calibration points can be modified if user-prepared standards are used.
Fast Tracker™ - For users taking measurements throughout the winemaking process, the HI83749 is equipped with Fast Tracker™ - Tag Identification System (T.I.S.) that makes data collecting and management simpler than ever. Fast Tracker™ allows winemakers to record the time and location of a specific measurement or series of measurements using iButton™ tags on specific tanks for quick and easy readings. Each iButton® tag contains a computer chip with a unique identication code encased in stainless steel.
GLP Data – The HI83749 features complete GLP (Good Laboratory Practice) functions that allow traceability of the calibration conditions. Data includes calibration points, date, and time.
Data Logging – Up to 200 measurements can be stored in the internal memory and recalled at any time.
Data Transfer – For further storage or analysis options, logged data can be downloaded to a Windows compatible PC using the RS232 or USB port and the HI92000 software.
Backlit Display – A backlit LCD display provides an easy to understand, user-friendly interface. Displayed codes guide the user step-by-step through routine operation and calibration.
Significance of Use
Unrefined wine is quite turbid and hazy from suspended solids produced during fermentation. The unrefined wine is treated with fining agents to reduce cloudiness. This cloudiness is what winemakers refer to as protein haze, or haze for short. Thaumatin-like proteins (TLPs) and chitinases are the primary grape proteins responsible for haze formation. These positively charged proteins degenerate and stick together, resulting in undesirable flocculent clouds and visible haziness.
The prevention of protein haze or deposit in bottled white wines is a universal concern and often a wine needs to be stabilized before bottling. One commonly used stabilization agent is bentonite. Bentonite is a volcanic clay earth type fining agent (like kaolin) that acts as a wine stabilizer. It improves the clarity of wine but has also negative aspects because of the volume of lees formed, reduction of tannin and color. Since there are different types and qualities of bentonite with different capacity of protein removal, it is important to make laboratory trials with the same lot and wetting degree of the bentonite as that will be used in the cellar.
Protein stabilization is normally not a problem in bottled red wines because of the relatively high concentration of phenols that binds and precipitates with the unstable proteins before bottling. Often bentonite is added to red wines at a level of about 12 g/hL (1 lb/1000 gal), reducing colloidal suspended particles thus improving membrane filterability.
Wines with low phenols contents, such as rose, light reds and whites should be checked for protein stability before bottling. Hanna offers a rapid test to verify the risk of future protein haze formation. If protein instability is detected, a next test can help defining the right amount of bentonite to be added for improving protein stability. It is important not to overdose bentonite, avoiding stripping wine flavour, body, and significant loss of color, especially in young red wines. Moreover, adding only the necessary amount of bentonite to obtain the desired protein stability results in a reduction of costs.
Winemakers can determine the initial turbidity of the unrefined wine with the HI83749 turbidity measurement instrument. After taking a turbidity reading the pre-made HI83749-20 Bentocheck Solution is added to the wine sample. A second turbidity measurement is taken. If the second turbidity reading is less than the initial turbidity reading plus 2 NTU, the wine can be considered stable. Otherwise a fining trial can be performed to determine the amount of bentonite that must be added to stabilize the wine.
Principal of Operation
To measure turbidity the HI83749 passes a light beam through the sample that is scattered in all directions. The intensity and pattern of the scattered light is affected by many variables, such as wavelength of the incident light, particle size and shape, refractive index, and color. The optical system of the HI83749 includes a tungsten filament lamp, a scattered light detector (90°) and a transmitted light detector (180°).
The HI83749 features a powerful microprocessor that calculates the NTU value from the signals that reach the two detectors. An effective algorithm is used to correct and compensate for any color interferences. The optical system and measuring technique also compensate for fluctuations in lamp intensity, minimizing the need for frequent calibration.
The HI83749-11 AMCO AEPA-1 standards ensure that measurements are traceable to primary reference materials. These standards are used for calibration and performance verification of the turbidity meter.
Supplied with Certificate of Analysis
• Lot number
• Expiration date
• Standard value @ 25 °C
• Reference meter NIST traceable
Provided storage containers
• Light tight
• Protects from accidental breakage
Can log and transfer up to 200 measurements and is equipped with Fast Tracker
Tag Identification System (TIS) that makes data collecting and management simple by recording time and location with the touch of a button, a two, three, or four- point turbidity calibration can be performed using the supplied standards, features a backlit LCD display with a user-friendly interface which has user step by step help through routine use and calibration
Instant and infinite sparkling water at your fingertips whenever you want it! Benchy connects to your household's water supply, chills, carbonates, and delivers on demand Serve up to 8 gallons of chilled, carbonated water per hour Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet See below for detailed installation video Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets. Easy Installation: Plug the Benchy into the wall Fill internal water tank Connect household water supply Connect CO2 Cylinder Pour chilled sparking water. It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down. Ensure that the unit is installed and operated according to the instruction manual which can be found below. Fully Adjustable The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water. Cooling Performance The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg. Specifications: 110V Refrigerant: r600a (80 grams) Cooling Power: 600 watts Power Consumption: 155 watts (idle power consumption less than 5 watts) Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature) Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing) Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing) Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed) Recommended Accessories: CO2 Gas Cylinder CO2 Regulator EVABarrier 4mm x 8mm Tubing PE Water Line Tubing 6.35mm Duotight In-Line Regulator (0-150 psi) Duotight Reducer - 8mm x 6.35mm 8mm Duotight Check Valve Diverter Valve (check water line connection for the size you'll need) Countertop Installation Recommended Accessories: (2) Short Shanks & Hex Nuts (2) Duotight Adapters - Beer Thread x 8mm (2) NukaTap FC Faucets& Self Closing Springs (2) Tap Handles (of your choice) Tube Cutter Faucet & Shank Wrench KegLand Part Number: KL2068
The KOMOS Cobra draft tower has a beautiful polished finish and features a built-in glycol loop for chilling. These towers are a gorgeous option for your tap room or home bar. The signature condensation on a glycol chilled draft tower will surely have your patrons thirsting for a pint! Of course, using the glycol loop is optional and isn't required to appreciate the striking design of the Cobra tower.
The towers come with female beer thread sockets and do not include shanks or faucets. We recommend the stainless Cobra Tower Shank and stainless Intertap forward-sealing faucets. When installing the shanks you will also need a tailpiece gasket to create a good seal.
For chilling the tower we highly recommend the KOMOS DraftMaster glycol chiller. This unit features a built-in submersible pump intended for pushing glycol or ice water through the Cobra tower's cooling loop. The pump can be turned on independently to circulate cooling solution constantly while you're serving from the tower, and then turned off when not in use. The DraftMaster also has 4 built-in draft coils that sit in the glycol reservoir, so you can serve from kegs at room temperature by passing the beer through the chiller on its way to your faucet.
Features:
Dual Tap
Glycol Loop
8mm OD stainless steel lines
Female Beer Thread (5/8" BSP) sockets for attaching shanks
Made from cast brass with chrome plating
Faucets and faucet shanks not included
Dimesnions:
Height: 14.16 inches from mounting plate
Width: 4.16 inches
1 inch OD
Please note: the beverage lines and glycol loop do not come marked. To identify them, blow air into the lines. If the air comes out of another line, that's the glycol loop. If the air comes out at the shank socket, it's a beverage line.
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.5 lbs
Rated to 140 degrees F
Height: 19 inches
Diameter: 10.5 inches
Completely taste and odor free
Carboys can withstand up to 15 psi of pressure with no deformation
Punted base to prevent sediment disturbances during transfer
