Plumber's tape, or PTFE thread seal tape, is used to connect NPT (national pipe thread) style threads. Use three wraps for brass and six wraps for stainless steel. 1/2'' wide x 520'' long roll.

Read more less

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 2" tri-clamp fittings Made from Silicone Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Keep an eye on your temps with the BrewBuilt tri-clamp thermometer. Perfect for stainless conical fermenters or T.C. kettles. The 3" diameter dial face is easy to read and scaled in °F and °C. The 6" probe length provides the thermometer with plenty of exposure for more accurate readings. 3" dial face 6" probe 1.5" T.C. Reads in °F and °C  

Read more less

O Ring for Beer & Gas Line QD (for H550A)

Read more less

This is a Blichmann Spare Part for the BeerGun Bottle Filler. Replacement Clip. Fits all models of the Blichmann BeerGun.

Read more less

Replacement O-ring kit for Blichmann RipTide™ pump.  

Read more less

If you're installing a stainless thermowell or Temp Twister Cooling Coil on your FermZilla, this pipe cutter will help make the process painless. This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze. Easy to use and compact so it can get into tight corners and gives you a clean pipe cut. Simply hand tighten the pipe cutter onto the mark where you want to cut the pipe. Rotate the cutter around the pipe a couple of times to create a groove all around the pipe, and then each time you rotate the cutter, tighten the blade a little. Each rotation will cut a little deeper into the pipe and the cut will be straight. Suitable for 1/8"-3/16" pipe (3-22 mm) Cuts copper, brass, aluminum, steel, and stainless steel Heavy-duty one-piece slide Polished roller for easy rotation Hardened steel cutting blade Kegland Part Number: KL14557

Read more less

BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft. When used with BrewBuilt conicals, 7 GPM is enough to coat the full interior of the fermenter, but longer CIP runs might be required to fully breakdown stubborn solid deposits.

Read more less

Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 2" tri-clamp fittings.  

Read more less

Type D Camlock Fitting. Female Camlock with 1/2" Female BSP. Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04473

Read more less

  This is a 1.5 in. TC sight gauge. It's small compact design makes it easy to put inline anywhere during the brewing process. Made from 304 stainless steel and breaks down for easy cleaning. 2.2 in. long.

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!   These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.   In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.

Read more less

Monitor fermentation activity in a stainless steel conical Check flow and liquid clarity during transfers Harvest yeast and store with end caps Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 1.5" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 1.5" tri-clamp Approximately 6.25" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Replacement seals for female camlocks. Compatible with Type B, C and D. Comes in pack of 5.

Read more less

Adapt any 2" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 2" T.C. to 1.5" T.C. 1.5" x 2" tri-clamp 3" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Replace the worn-out gaskets on your stainless quick disconnects. Temperature rated from -40° to 250°F.  

Read more less

Stainless steel splicer designed for connecting two different sizes of tubing together. The smaller barb will accept 3/16 in or 1/4 in ID tubing (typical to homebrew systems) on one side, and the larger barb will accept 5/15 in or 3/8 in ID tubing common to commercial systems. Sold individually.

Read more less

Stainless lock nut. 1/2" FPT

Read more less

Keep an eye on your temps with the BrewBuilt tri-clamp thermometer. Perfect for stainless conical fermenters or T.C. kettles. The 3" diameter dial face is easy to read and scaled in °F and °C. The 2" probe length will stay clear of other fermentation or brewing accessories. 3" dial face 2" probe 1.5" T.C. Reads in °F and °C  

Read more less

Give yourself added peace of mind by using this high temp tubing on the hot side of your brewing system.   When compared with traditional silicone, EJ Beverage High Temp tubing is less likely to kink at higher temperatures. It is made of TPE (Thermoplastic Elastomer) which is an excellent alternative to high temperature PVC and Silicone.     The advantages of this high temp tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 1/2” ID x 3/4” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 63 psi Working pressure of 21 psi  

Read more less

Type B Camlock Fitting. Female Camlock with 1/2" Male BSP. Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04480

Read more less

The BrewBuilt tri-clamp thermowell allows you to monitor temperatures with digital thermal probes. Perfect for controlling fermentation temperatures on a stainless steel conical using a digital temperature controller. Or use it with an electric boil kettle or hot liquor tank to send temp readings to a PID controller to control your heating element. 1.5" T.C. 4" probe Compatible with 1/4" Ø temp probes Made from 304 stainless steel

Read more less

Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL11921

Read more less

Stainless steel is preferred by those who know!   This heavy duty Stainless Elbow with barb is a versatile piece of hardware for your brewing setup. The 1/2" MPT threaded end attaches to a 1/2" threaded FPT fitting. The barb will accommodate 3/8" ID tubing. Use it anywhere you want tubing to come off at a 90 degree angle.

Read more less

Reinforced vinyl tubing is a great option for transferring your homebrewed beer. This food grade 3/8 in ID Reinforced Vinyl Tubing is rated to 158 degrees F, and 40 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is useful in your setup where you want extra tubing strength, but your system pressure won't exceed 250 psi.  

Read more less

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 3" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

This fitting allows you to change a 1.5 in. TC to a 1/4 in. flare. The 1/4 in. flare is compatible with a standard swivel nut for draft lines making it an easy way to transfer to kegs!

Read more less

End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. They're also great for capping butterfly valves when they won't be used for a while. Give your butterfly valve a quick spray with Alpet or Star San, then cap it off to ensure the interior space remains sanitary until the next time you use the valve. For 2" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! A single-handed connection and disconnection Single barb system which eliminates the use of hose clamps in most applications Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

For commercial brewery application with a range of 0-2.2 Bar. For homebrew fermenters, see the BrewBuilt® Spunding Valve Automatically release pressure inside your fermenter during pressure fermentations Compatible with any stainless steel pressurizable fermenter with 1.5" tri-clamp ports In-line pressure gauge for easy reference of tank pressure reads from 0-35 PSI Made from 304 stainless steel and comes fully assembled This tri-clamp spunding valve provides professional-level accuracy for fermenting under pressure. Attach to any pressurizable stainless steel conical with 1.5" TC ports and set your desired blow-off pressure. A pressure gauge sits in-line from the conical to the spunding valve so you can reference the current pressure inside your vessel at any time. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Not designed for homebrewing conicals where the maximum allowed pressure does not exceed 1 Bar.   The pressure gauge reads from 0-35 psi or 0-0.25 MPa. The spunding valve is scaled in both psi and BAR, up to 32 psi (2.2 BAR). Comes fully assembled 1.5" tri-clamp connection In-line pressure gauge Made from 304 stainless steel For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.  

Read more less

This stainless steel ball valve is the perfect match to most homebrewing kettles with a 1/2" coupler or nipple on the bottom.  The 3-piece design makes it easy to take apart and keep clean, preventing any spoilage organism from lingering between batches.  It has a 1/2" FPT inlet and outlet.

Read more less

If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valves have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The plastic handle can be rotated 180° for right or left hand operation. 1.5" tri-clamp Plastic handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Male Kent QD with 3/8" barb on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 4" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less