Brew Better Beer with Pro-Level Gear

Stainless steel coupler or "reducing socket". 1" BSPP x 3/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10566  

Read more less

Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580  

Read more less

Stainless steel coupler or "reducing socket". 3/8" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10597  

Read more less

Stainless Lock Nut. 3/8 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06514  

Read more less

Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

Read more less

Glycol Chillers for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 4.5 gallon bath capacity Max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F

Read more less

Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep. KegLand Part Number: KL25553    

Read more less

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 73 lbs Gross weight: 88 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.0 In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

This new Blichmann Engineering innovation redefines electric heating! Unrivaled performance, speed, and simplicity. Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat. Ideal for indoor brewing and a perfect companion for your BoilerMaker­™ brew pot. It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template. We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end. Hot, fast, and easy. Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates. Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot! Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling The BoilCoil™ includes a "plug and play" 12 ft factory wired cable. LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!). Simple installation requires drilling only two small 5/8" holes with our handy drill template. No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles. The BoilCoil™ will fit in most competitive pots too! See data tab for dimensional drawing. Couple with the electric BrewCommander™ controller for the ultimate in temperature control. Kettle Size: For 7.5 gal Boilermakers™ Rated Voltage (VAC): 120 v Recommended GFCI Breaker Size: 20 amp Power (W): 2000 W

Read more less

Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 71 gal/hr (270 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

Never need batteries again for your High Precision Series Scale. For the American Weigh product AMW LB-501, our MT353. Input: 120V at 60Hz Output: 9V DC at 100mA

Read more less

The Tel-Tru SD3 digital thermometer is designed to deliver industry-leading value. It is rugged and dependable for use in sanitary applications, available in NPT or Tri-Clamp configurations to meet customer needs. All models are NIST traceable and include a lithium battery that lasts a minimum of 8 years.* The SD3 meets 3-A Sanitary Standard 74-07 requirements, making it suitable for commercial applications ranging from food & beverage to pharmaceutical or petrochemical, and more. Available with a 2.5" or 4.5" long probe. Heavy-duty 3" 304SS hermetically sealed case Digital sensor for maximum precision Response rate of 1 second 8-year lithium battery* Temperature Range: -67 to 302°F Accuracy: ±0.4°F High-visibility 0.4" tall LCD display 316SS probe Glass lens 1.5" TC connection Made in USA *Battery life expectancy is eight years at normal room temperature.

Read more less

Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Male QD 1/2" Male BSPT Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41096

Read more less

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2" Outer Diameter - 2.43"    

Read more less

Brass - 1/2" MPT x 1/8'' FPT bushing

Read more less

Brass - 1/8'' fpt x 1/4'' mpt Bushing

Read more less

Stainless steel coupler or "reducing socket". 1/2" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06415  

Read more less

Replacement O-rings for the Stainless Bucket Fermenter, Foundry™, and Crucible™ Valve.

Read more less

Replacement Temperature Sensor for Kreyer Chilly 45, Chilly Max, and MCK units.

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks. 22"L x 16"W x 22" H, 8.82 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets

Read more less

The eXact iDip® Professional Test Kit is the latest generation test kit that combines two state of the art water quality test instruments. The first is the revolutionary Level 1 NSF/ANSI-50 Certified eXact iDip® Smart Photometer System® which integrates patented 2–way wireless communication with any compatible iOS or Android smart device and has the potential to test over 40 water parameters. The second is the NEW eXact® pH+ Meter system which capitalizes on electrochemistry technology combined with Bluetooth connectivity.   Preconfigured kit comes with exactly what's needed to start testing (excluding app software). Packed in a rugged and durable plastic case with secure fasteners and padded compartments. Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0.     Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate eXact® pH+ Meter System pH, TDS, Salinity, Conductivity, and Temperature Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99    

Read more less

New and improved with the professional brewer in mind, the Tilt Pro is the bigger, badder version of the original Tilt Hydrometer. With three times the volume and weight as the original unit, the Tilt Pro's larger size allows for more than double the batter life. With preinstalled Energizer® AA lithium batteries, the Pro will stay powered for up to 5 years depending on usage. So much time you may forget your Tilt actually runs on a battery! The extra size and weight come with an added bonus: improved specific gravity stability at high krausen, so you will see a steadier read-out on your iPhone, Android, or Raspberry Pi. In addition, Tilt Pro has boosted the range with a high-gain antenna that in testing increased range by 20% vs. the original Tilt. Now you can see your Tilt through thicker heads of foam and heavier stainless steel walls. To top it off they've included the extra decimal of precision available from the sensors and to the read-out so there are now decimal degrees Fahrenheit as well as higher resolution Celsius. Specific gravity now reads out to the 10,000th place (for example 1.0000). You can now see fermentation activity dropping less than a brewer's point per day. In all they've made several adjustments we believe the craft beer professional (and serious home brewer) is sure to appreciate. Specifications: Size: 1.7" (43mm) diameter (max) by 5.4" (140mm) tall Weight: 5.4 ounces (153g) Specific Gravity Measurement Range: 0.9900 - 1.1200 Specific Gravity Resolution: 0.00001 Temperature Measurement Range: 0°F - 140°F (-17.8°C - 60°C) Note: Installed lithium batteries include a built in PTC (heat activated fuse) that will temporarily cut power if batteries exceed 140°F. Temperature resolution: 0.1°F (0.1°C) Absolute Maximum Temperature Range: -40°F to 185°F (-40°C to 85°C) Battery: User-replaceable, 2x 1.5v AA battery (Li/FeS2), widely sold as "Energizer®  AA Ultimate Lithium".

Read more less

Heavy-duty hose clamp suitable for 2-1/4" to 3-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.125 inches.

Read more less

Male 1/2" NPT threads on both sides, no space between them

Read more less

Replacement temperature probe for the RAPT Fermentation Chamber. This is the standard probe that is included with the fridge. It can also be replaced with the Extension Probe which is long enough to be fed into a fermenter's thermowell. KegLand Part Number: KL26451

Read more less

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d) Net weight: 88 lbs Gross weight: 101 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

This is the Fermentation Kit only. For the Corinical Keg check out BL27 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.

Read more less

Designed to extend an eController further alway from an eKettle. Very useful in three vessel setups. Two lengths available. L6-30 Power Plug  10 Gauge SJOOW Power Cable Temp Prob Harness

Read more less

If you want a top of the line, electric, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The RIMS-style system comes in 4 different batch sizes listed above. The system comes with 3 Boilermaker kettles (2 electric) with 240 v BoilCoils, 2 Riptide Brewing Pumps, 2 Tower of Power Controllers, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. Blichmann's BoilCoil are engineered to perform at their best in the Boilermaker kettles. They'll provide consistent heating, boil quality, and boil-off rates. The BoilCoil has an ultra low watt density making scorching impossible when used properly. Made from stainless steel and with an easily removable plug to clean. Features: 3 - Boilermaker Kettles (2 Electric) Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles   2 - 240 v BoilCoils Each BoilCoil is built for the Boilermaker kettles so you can count on consistent heating performance, boil quality, and boil-off rates. The BoilCoils have less than ultra low watt density meaning there is no chance of scorching when used properly Made from stainless steel Cleaning is easy with the removable plug The 240 v Coil includes a 12 ft cable with a molded twist lock L6-30P plug   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - BrewCommander™ Brewhouse Controllers Intuitive touchscreen interface Keypad data entry Advanced temperature control algorithm Automated step mashing with up to 5 steps and 9 profiles Boil addition times with up to 7 additions and 9 profiles Integral pump switch Lab-grade precision thermometer that is superior to RTDs Advanced customizable settings Mash step ramp rate delay HERMS / RIMS offsets Audible alarms Upgradable firmware Switchable between table and wall mounting Modular with multiple unit connections possible Optional relay modules allow control of a single kettle with up to 5 heating elements all on one controller Optional SparkBox™ Remote Ignition Module Offered in electric and gas versions   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10 gallon size - 72 in L x 24 in W x 25 in H 15/20 gallon size - 96 in L x 30 in W x 24 in H

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets the passionate homebrewer's desire for customization. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware, including heating elements, valves, thermowells, and clamps, must be purchased separately to build your desired brewing system. Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.

Read more less

The 30 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning.  From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™ false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness.  The BoilerMaker™ G2 is clearly in a class of its own.  Imported pot, assembled in USA with additional USA components.  Lifetime limited warranty. All the items you need come standard, installed, and ready to use on the G2 Brew Pot: Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this pot into a family heirloom* Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator!  All of our pots perform consistently and flawlessly with homebrewers in mind Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy. Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience Improved surface finish hides finger-prints and cleans impeccably.  Sleek brush on the outside and a silky smooth satin finish on the inside. Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports.  Much easier and more accurate than internal graduations.  It will also act as a mash manometer and warn you of impending stuck mashes! Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom! Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch. Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting. A great way to start with high-quality equipment equipped with all the options. Please Note: 30 & 55 gallon G2 Boilermakers will come equipped with G1 Lids (see image for details)

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! These systems will ship via freight with lift gate to anywhere in the contiguous United States. There is a $500 flate rate fee for shipping from the manufacturer which is already priced into the cost of the system. 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   2 - 240V BoilCoils™ Less than 30 W/in² nearly half of the typical ultra low watt density for easier cleaning and scorch free brewdays. Each BoilCoil™ is engineered to preform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates. Robust stainless steel construction. Less than ultra low watt density means NO chance of scorching when used as directed. The 240v BoilCoil™ includes a 12 ft factory wired cable with a molded twist lock L6-30P plug. Removable custom engineered plug means cleaning is a snap.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.  

Read more less

If you want a top of the line, gas-fired, 3 vessel brewing system then look no further! Blichmann has released their new horizontal brew systems complete with all of Blichmann's innovative products. The HERMS-style system comes in 5 different batch sizes listed above. The system comes with 3 Boilermaker kettles, 3 HellFire Burners, 2 Riptide Brewing Pumps, 2 Tower of Power Gas Controllers, and the Therminator Wort Chiller, all on a large custom stainless steel table with the necessary hoses and fittings. The Boilermaker kettles are all made in the US from a single piece of heavy gauge, US made stainless steel. They come with Linear Flow Valves that allow for precise control of flow and disassemble for easy cleaning. Borosilicate sight gauges are mounted to the side of each kettle. The diptubes all come with rotating racking arms to allow you to adjust them for clearer beer. The mash tun comes with the patented button louver false bottom and Blichmann's AutoSparge. The boil kettle comes with a whirlpool fitting and an adjustable viewing thermometer. The HellFire Burner is a highly efficient burner with dual mode capability and is unlike anything else on the market. This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. The Tower of Power temperature controllers give you precise control over the temperature of your mash and your boil. They come mounted to the table for your convenience. They come with a pilotless electronic ignition control system that will instantly relight your burner if blown out by wine, and will automatically shut down if a flame is not detected within 10 seconds. Also offers a Class A precision RTD temperature sensor, all in a compact, brushed stainless enclosure. Features: 3 - Boilermaker Kettles Made in the US with US made heavy gauge 304 stainless steel Includes Linear Flow Valves to allow for precise control and easy cleaning Rivet free handles, rugged cool touch grips, oriented for easy carrying Borosilicate glass level gauge Rotating racking arm diptubes Blichmann provides a limited lifetime warranty on the kettles 5 gallon size includes 3 - 10 gallon kettles 10 gallon size includes 2 - 15 gallon kettles and a 20 gallon boil kettle 15 gallon size includes 2 - 20 gallon kettles and a 30 gallon boil kettle 20 gallon size includes 3 - 30 gallon kettles 3 - HellFire Propane Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting)  Patent pending clip-on heat shield Adjustable kettle retaining bars Non-rusting, fume free heavy gauge stainless frame   2 - Riptide Brewing Pumps Ultra quiet construction Tri clamp fittings for easy cleaning and connecting/disconnecting Linear Flow Valves   2 - Tower of Power Gas Temperature Controllers PID Temperature Control On/Off/Auto mode selector Class A precision RTD temperature sensor Controllers come mounted to the table for ease of use Compact, brushed stainless enclosure   Heavy Duty Custom Table 14 gauge 304 stainless steel construction Made in the USA Drip ledge to keep your floor clean Built-in junction boxes Heavy duty caster make it easy to move around Lower shelf storage Table dimensions: 5/10 gallon size - 72 in L x 24 in W x 28 in H 15/20 gallon - 90 in L x 26 in W x 24 in H This gas system comes ready to use with Propane. To use with Natural Gas, see the conversion kit listed below in the "You Might Also Need" section. Please Note: This system requires one 120v 15 Amp GFCI outlet.

Read more less

Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo

Read more less