Brew Better Beer with Pro-Level Gear

Measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work.

Read more less

Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06620  

Read more less

Stainless steel 1/2" BSP washer. KegLand Part Number: KL03698  

Read more less

1/2" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06408  

Read more less

Replacement Heavy Duty Wire Shelf for the RAPT Fermentation Chamber. Weight Rating: 132 lbs (60 kg) Dimensions: 17.7" W x 16.1" D x 1.1" H (450mm x 410mm x 30mm) KegLand Part Number: KL15844

Read more less

This is the Cornical Keg only. For the Fermentation Kit check out BL279 or for the complete kit check out BL275. The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure. It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria. Features: Ferment, carbonate, and serve all from a single vessel Sanitary sample valve with rotating racking arm Keg can be used as a fermentor or a serving keg Cleaning made easy with a removable bottom 1.5 in. butterfly dump valve Rated up to 50 psi Made from sanitary stainless steel Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.

Read more less

A replacement gasket that fits between the lid and the cone of the Blichmann Fermenator Conical.

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter. The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required. The GCA connects to the Grainfather App so you can control your fermentation temperature on the go. Included in the GCA Kit: GCA Controller Heating Pad (12V 30W) 5m Cooling Coil Hose Rubber Bung Velcro Hook Strip x 4 Hose Clamps x 2 Rubber Bung Stoppers x 4

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The original all-in-one brewery still made in Germany! 5" touchscreen is easy to use and guides you through the brewing process Brew all-grain beer inside your home—no gas burner needed Built-in cooling jacket eliminates the need for awkward wort chillers 2R interior stainless finish with electropolished heating coil The "Mercedes®" of brewing systems. When you want the best, this is it. Never ceasing to improve upon the original Braumeister design, Speidel has taken this unit a step further with the new 5" touch screen control panel. The new automatic control system brews with your custom recipes and guides you through the brewing process. Now with integrated WiFi and bluetooth as standard, recipes and software updates can be synced automatically. Speidel Braumeister continues to be the all-in-one brewing system for brewers that demand the highest quality. The Braumeister is the original all-in-one, electric all-grain brewing system. Designed and patented in Germany over a decade ago, it has since been copied around the world. Still made in Germany today by Speidel, a 5th generation German stainless steel manufacturer, the Braumeister is the Mercedes® of brewing systems. Speidel made a decision to not try and compete on price with the rest of the all-in-one machines that are made in China. They actually went the opposite direction improving upon the Braumeister many times. They've improved the control screen, added dimpled jackets to eliminate wort chillers, improved the programming and functionality, and created an online myspeidel.com control center along with multiple other small refinements. They also created a host of optional equipment to further enhance your brewing. If you appreciate really well-made equipment, the Braumeister is for you. It is the best of the best. The welded on dimpled jacket eliminates the need for a separate wort chiller and also opens the door for using the Braumeister as a temperature controlled fermenter—see the video below. These jackets have 1" male threading, and aside from cooling, a Dump Valve tap has been added to the base of the unit to make emptying and cleaning that much easier. Advantages of the Braumeister First, the system has a small footprint and is powered by electricity, allowing you to brew inside, in a confined space, without the inherent dangers of using an open flame. Secondly, this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built-in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine, MoreBeer! agrees. Unlike other brew systems that have the temp probe located at the bottom, the Braumeister's temperature sensor was installed inside the middle bar. This means that the temperature is measured directly in the malt and is even more accurate in combination with the new software adjustments. Walking Through the Brew Process On Brew Day, you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The water resistant touchscreen controller reads in °C or °F, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature, a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most all-in-one systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. At any time, you can pause the pump from the controller screen. Speidel upgraded their pump to be detachable for easy cleaning and maintenance between batches. When the mash is complete, another beep will alert you to remove the entire mash tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the mash with hot water or to just add water directly the wort. Push another button and the boil starts and will run for however long you program it. When the boil stops, begin chilling your wort. Features: Brew in the tightest of spaces, anywhere in your home with a small footprint of counter space Easy to handle brewing and cleaning, malt pipe slides up with little effort Patented malt pipe technology. Wort is internally pumped from the bottom to the top for effective and gentle recirculation. No pipes are awkwardly mounted to the side of the kettle Clean, contactless cooling by running cold water through the welded-on cooling jacket. No need for sanitizing and storing a separate immersion wort chiller The pump is accessible beneath the unit and can be detached for cleaning and maintenance Braumeister stays up-to-date with regular software updates via an integrated WiFi module myspeidel.com syncs with the digital controller on your Braumeister Enter a recipe in myspeidel.com, choose a recipe from the community of other users, or design a recipe in Beersmith and import it to myspeidel.com and it will come up automatically on your Braumeister's touchscreen controller Edit your recipe on the fly in the touchscreen controller and it will automatically update on myspeidel.com When the brew day is over, ferment your beer inside the Braumeister, using the cooling jacket to control the fermentation temp Technical Specifications for 20L Braumeister: 110V - comes with a NEMA 5-20 plug. You may need to install the corresponding wall socket or use an adapter. Produces 23L of wort, which is about 20L of finished beer Controllers can store up to ten recipes for easy repeat brewing! 2,000-watt built-in heating capacity 23-watt pump 110V, 50-60Hz, 18.2A Max Grain Capacity: 13.2 lbs Max Fill Level: 25L (Upper Marking on Center Rod) 23.6" H x 15.7" Ø 33 lbs  

Read more less

Adjustable propane regulator up to 30 psi. 3/8-in Flare Swivel Connector. For Bayou Classic Banjo Cookers, and Single & Jet Cookers.  

Read more less

The 10 gallon BoilerMaker™ G2 is a no compromise premium brew pot packed with standard features like a patent pending linear flow drain valve that can be oriented in any direction and disassembles in seconds for cleaning.  This US made single piece construction pot carries a lifetime limited warranty.  From the sleek easy to clean surface finish, to the cool touch custom molded grips, durable easy to read level gauge, snap-in drain tube, the informative BrewMometer™ and broad suite of accessories like our patented Button Louver™false bottom, patented HopBlocker™ and AutoSparge™, this pot defines awesomeness.  The BoilerMaker™ G2 is clearly in a class of its own. All the items you need come standard, installed, and ready to use on the G2 10 gallon brew pot: Heavy gauge, 304 single piece, deep drawn, weld-free American made construction will turn this 10 gallon pot into a family heirloom* Blichmann Engineering was the innovator of the 1.2 height to diameter ratio not the imitator!  All of our pots perform consistently and flawlessly with homebrewers in mind Patent pending parabolic valve provides linear flow for unparalleled flow control. Built in 90 degree outlet can be oriented at any angle to make hose routing simple and kink free.Cool touch silicone grip makes handling under fire easy. Fixed angle BrewMometer™ with their unique patented brewing dialface - the ultimate in brewing convenience Improved surface finish hides finger-prints and cleans impeccably.  Sleek brush on the outside and a silky smooth satin finish on the inside. Standard heavy-duty borosilicate glass level gauge never clouds or scratch. Features rugged stainless steel guard with engraved volume graduations, cleaning brush and clean-out ports.  Much easier and more accurate than internal graduations.  It will also act as a mash manometer and warn you of impending stuck mashes! Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of bottom! Handle orientation that makes carrying easier and lid storage on the pot handle. Cool touch high impact glass filled nylon handles are durable, comfortable, and cool to the touch. Stepped bottom on pot supports mash screen and virtually eliminates sidewall shunting. A great way to start with high-quality equipment equipped with all the options.

Read more less

This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478

Read more less

Replacement 25 mL Plastic Test Tube with Cap for the Lamotte Water Test Kit (7189-01). 

Read more less

Refill for Chromotagraphy kit. 25 Sheets.

Read more less

Stainless Nipple - 1/4" x Close Overall length - 7/8"

Read more less

Designed to work with the FTSs Touch to heat fermenting wort in colder climates. Includes XT30 Connector - Will not work with legacy FTSs controllers.

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 84 lbs Gross weight: 98 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

This silicone gasket is for Ss InfuSsion 20 gal false bottoms. Does not fit on Norcal false bottoms.

Read more less

This bushing can be used to install a weldless brewmometer into a 1/2" NPT fitting. It can also be used with Blichmann Tower of Power temperature sensors. To install the thermometer into a female NPT fitting, place the o-ring and washer on the thermometer as indicated by the directions, then thread the adapter bushing onto the thermometer. Apply plumber's tape (H900) to the external NPT threads of the bushing. Tape is not required on the thermometer's threads due to it using the o-ring. Simply thread the thermometer into the bushing with the o-ring and washer in place. Caution: Once installed, the bushing can not be removed. Avoid overtightening, as it may damage the components.

Read more less

Brass - 3/8" MPT x 1/2" Barb

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06439  

Read more less

The Milwaukee MW151 MAX 3-in-1 PRO pH/ORP/Temp Bench Logging Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail.  The logging feature allows log-on-demand and log-on-stability features that ensure all readings are accurate and not entered incorrectly. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean.  From brewers and wine makers to hydroponic growers, labs and water treatment, the MW151 MAX is your Bench Logging Meter for fast, accurate readings. Accuracy People choose the MW151 MAX 3-in-1 PRO pH/ORP/Temp Portable Logging Meter to improve the accuracy of their testing program. With up to 5 point calibration and 7 standard buffer choices (2 custom buffers also), the meter can be quickly calibrated to a higher accuracy compared with one or two point calibration. The MW151 MAX meter is accurate to ± 0.002 pH. 8 x more accurate than some alternative meters. The meter comes with a refillable, glass, double junction pH electrode and MA831R temperature sensor allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC). The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C (+/-0.8°F). Low Maitenance The MW151 MAX pH/OPR/Temp Bench Logging Meter comes with the Milwaukee glass, double junction MA917B/1 pH electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking, hydroponics, laboratories and many other applications.  Features: Fast easy-to-read results with large duel level digital LCD readout. Extreme accuracy to ±0.002 pH | +/- 1 mV OPR | +/- 0.4°C (+/-0.8°F).  Extended pH range (-2.00 pH to 20.00 pH / -2.000 to 20.000 pH). Lightweight, sleek design with small benchtop footprint. Simple easy-to-use logging and USB download functions, manual or on stability up to 1,000 logs. Electrode diagnostics feature checks and displays the condition of the pH electrode.  Easy measurement: just place the electode and temperature probe in the sample, gently stir and wait for the reading to stabilize. Simple push button, automatic up to 5 point calibration for increased accuracy. Up to 7 Standard calibration solutions (1.68, 4.01, 6.86,7.01, 9.18, 10.01 and 12.45) and 2 custom choices. Refillable, glass, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage. Built-in rechargeable battery with 8 hours battery life (battery included). Selectable Auto-off feature.  Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages. Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out). 3 feet probe cables for extra flexibility when testing. Care and Use pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. Sensing Bulb The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. Reference Junction The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function. You can extend the life of your pH electrode in the following ways. Storage To minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. Cleaning and Maitenance Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also: Inspect the electotrode for damage or scratches, if present replace the electrode. Inspect the cable.  The connection cable and insulation must be intact. Connectors should be clean and dry. Rinse off salt deposits with water or DI water. Calibration The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage. Specifications: pH Range: -2.00 to 20.00 pH / -2.000 to 20.000 pH ORP Range: ±2000.0 mV Temp. Range: -20.0 to 120.00°C (-4.0 to 248.0°F) Resolution: 0.01 pH / .001 pH Resolution: 0.1mV Resolution: 0.1°C / 0.1°F) Accuracy: ±0.01 pH / ±0.002 pH @ 25°C / 77°F Accuracy: ±1mV Accuracy: ±0.4°C |±0.8°F pH Calibration: up to 5 point automatic pH calibration | 7 standard buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) and two custom buffers Temperature Compensation: Automatic, -20.0 to 120.0°C (-4.0 to 248.0°F) or manual pH electrode: MA917B/1 glass, double junction pH electrode (supplied) Temperature probe: MA831R (included) Logging: Maximum 1,000 samples (stored in up to 100 lots) / on demand, 200 samples on stability, 200 samples/ Interval logging, 1000 logs PC Connectivity: 1 USB Port, 1 micro USB port Power supply: 12VDC, 5 VDC USB Adapter (included) Battery life: Approx. 8 hours of use Auto-off: Selectable 5, 10, 30, 60 min. or off Environment: 0 to 50°C / 32 to 122°F; max RH 95% Dimensions: 230 x 160 x 95 mm (9.0 x 6.3 x 3.7 inches) Weight: 0.9 kg / 2.0 lbs.    

Read more less

Stainless Nipple - 3/4" x Close

Read more less

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 1" Outer Diameter - 1.33"   Please Note: Made to Order lengths have a lead time of approximately 2 weeks.    

Read more less

This is a Blichmann Spare Part. This is a direct replacement for the original regulator that comes with the Blichmann Floor Standing Burner (BL21).

Read more less

Stainless steel reducing bush. 3/8" BSP x 1/4" BSP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06552  

Read more less

This elbow barb makes it easier to route lines and avoid kinks in your tubing. Commonly used for pump inlet/outlets, fermenter blowoffs, or gravity fed transfer lines. Quick Swivel Nut sold separately. Specs: 1/2" (13mm) OD x 1/2" Quick Swivel Nut compatible end Stainless steel KegLand Part Number: KL31660

Read more less

Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 1/4" to 5/16" ID tubing. Made from 304 stainless steel.

Read more less

When you want to customize your own setup, it’s good to have the right fitting on hand.   This stainless steel compression fitting gives you the versatility to put your setup together in the way that works best for you.   304-Type Stainless Steel compression fitting.   1/2" Comp. x 1/2" FPT

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points High-quality, stainless steel table with rolling casters saves space in your brewery and can be easily moved whenever needed The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is compact enough to ride shotgun on the included stainless steel work table. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Stainless Steel Work Table The heavy-duty stainless steel work table is the final piece that makes this the Ultimate Chilling Package. Saddle up the X3 Conical and IceMaster Chiller to reduce the footprint of your brewery. And with the swivel rolling casters installed, you'll have easy mobility to move your setup if ever needed.  Please Note: Avoid moving the table while the Conical is resting on top or in use. This can lead to injury or damage to the conical and surrounding area. The table cannot accommodate the 25 or 38 gal X3 conicals.

Read more less

Technology. The industrial revolution, the auto, the tv, the computer, the smart phone... the Vortex Funnel. You too can now be an early adopter and enjoy fast transferring.   

Read more less

Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann, the first pump designed specifically for homebrewing. We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features.  First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference.  Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter.  And to top it all off we like the mounting base and the extra long 3 m cord. 3 m gets the plug connection a few meters away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice.  Oh, and we almost forgot the power switch which is always a nice feature on something electric!    All in all this is a no brainer upgrade for the difference in cost.     Features: Strong rare earth magnets and a curved blade impeller provide 22 L/M and up to 6.5M of pressure head! Tri-Clamp head disassembles easily for cleaning 1/2" NPT inlet and outlet Motor is enclosed in a splash proof and super quiet case Rotatable stainless steel head Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation Linear flow valve provided for excellent flow control Power switch on base 3 m long power cord with 230V plug

Read more less

The Command Stand™ offers the ultimate in brewing flexibility! It's unique, modular design gives you the ability to customize your stand with just the components you need, and add more when you want to. Every base Command Stand™ includes all the hardware needed to mount a Riptide™ Brewing Pump and BrewCommander™ Brewhouse Controller. For a complete list of compatible components check out the list below!   Plus, no mounting modifications to the stand are necessary to add on additional components later.   Base Stand features include: Conveniently mount one or two gas or electric controllers, with backwards compatibility for Tower of Power™ Controllers. Pre-Drilled mounting holes for mounting a wide selection of our brewing components. Gloss black powder coated tower and stainless-steel legs will look beautiful for years. Convenient Cable routing feature. Compatible With These Blichmann Products: Flow Control Manifold BrewCommander™ Brewhouse Controller RipTide™ Brewing Pump Therminator™ RIMS-Rocket™ HopRocket™ Power Controller Stand only, accessories not included.  

Read more less

This is a super cool bottle for making yeast starter wort. Mix DME and water to make your wort and then boil in the microwave with the cap off. Remove from microwave, thread on the cap while still hot, and place in refrigerator. Store the wort till you need it.  When you are ready to make a starter remove from refrigerator to warm up, pour into a sanitized flask, and add your yeast. Make multiple bottles all at once at store in your refrigerator until needed.  This reagent bottle is made from durable borosilicate perfect for storing anything you need. Borosilicate is great because unlike ordinary glass it won't crack with rapid changes in temperature. KegLand Item Number: KL04015

Read more less