Detecting your location...
SALE: UP TO 23% OFF LALLEMAND YEAST
Brewing Equipment Category
Homebrew Equipment

Brew Better Beer with Pro-Level Gear

Equip your home brewery without breaking the bank. From heavy-duty mashing kettles to precise transfer pumps, we have exactly what you need to craft the perfect pint.

  • Free Shipping on qualifying high-quality gear orders over $59.
  • Ready-to-Brew Kettles designed for immediate, highly effective brewing.
  • Fast & Efficient Cooling using our premium wort chillers to prep for yeast.
  • Effortless Liquid Transfers with our self-priming and magnetic drive pumps.
Step 1

Mash & Boil

Extract rich flavors and boil your wort using our heavy-duty standard or modified kettles and high-output burners.

Step 2

Chill & Transfer

Rapidly drop the temperature with a wort chiller, then use a magnetic drive pump to seamlessly move your beer into a fermenter.

Step 3

Ferment & Enjoy

Pitch your yeast, allow the fermentation magic to happen, and pour yourself a perfect, refreshing homemade pint.

Shop by collection
1029 products

  • Blichmann ThruMometer 3/8 in. In-line Thermometer

    Blichmann ThruMometer 3/8 in. In-line Thermometer

    18 reviews

    The Blichmann ThruMometer In-line Thermometer is a great way to know the temperature of your wort while it's being transferred. Very helpful when using a counterflow or plate chiller to read the temperature of your wort going into the fermenter. Made of heat-treated highly corrosion resistant aluminum. Reads from 58°F - 88°F, and has 3/8" in and out posts. Note- Clean with mild detergent only, using warm (no hotter than 140°F) water. Do not soak in the same bucket as other metals, as this could result in galvanic corrosion to the aluminum. After use, dry thoroughly and store in the protective plastic tube.

    $34.99

  • Sale -15% Catalyst 6.5 Gallon Tank Cover Catalyst 6.5 Gallon Tank Cover

    Catalyst Fermentation System - Tank Cover

    12 reviews

    Further improve the quality of your beer produced using the Catalyst with this custom designed cover.  Thick 600D vinyl laminated canvas covers your entire fermenter, eliminating UV exposure and any skunking that comes with it.  Reinforced cross stitching and integrated carrying straps make moving your beer easy (as easy as moving 50 lb of beer can be!).  Thick construction also acts as insulation, reducing temperature swings, and a handy quick-view flap lets you monitor fermentation without removing the jacket.

    $29.99 $25.64

  • Pump Mounting Bracket - Stainless

    Brewing Pump Mounting Bracket

    11 reviews

    Having your pump securely mounted where you want it gives you a more stable unit that is easier to control.   With this stainless mounting bracket you can mount your pump right where you want it in your brewing setup. It has two pre-drilled holes so you can attach it to a brewing stand, cart, etc. After you have secured the mounting bracket you can easily slide your pump into place and remove it when you're finished, if desired. Keep your brew system tidier during brewing by giving your pump a dedicated mount to keep it out of the way.   Fits our Chugger Pumps (H331 and H332).  

    $32.99

  • Universal Stopper #11-11.5 - With Hole - Each (Large) Universal Stopper #11-11.5 - With Hole - Each (Large)

    Universal Rubber Stopper - Size #11-11.5 (With Hole)

    Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.

    $4.99

  • Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube) Kegmenter - 50 L (4 in T.C. Lid w/ Ball Lock Posts, Floating Dip Tube)

    Kegmenter Fermentation Keg - 13.2 gal.

    4 reviews

    Want an easy-to-use, stainless vessel that ferments and carbonates? This 50L/13.2 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565

    $329.99

  • Polycarbonate Sight Glass (2 Piece Set) Polycarbonate Sight Glass (2 Piece Set)

    Polycarbonate Sight Glass - 23.5 in.

    3 reviews

    Made from polycarbonate, these simple sight gauges are easy to install and clean. It comes with a 1/2 in BSP threaded post featuring a barb with o-rings and a 23.5 in polycarbonate tube that can be cut down to size. Note: The tube may require a hose clamp to keep it fixed to the barb. Kegland Part Number: KL03742

    $14.49

  • Filter Sheets - 20 cm x 20 cm (2-3 Micron) - PLACEHOLDER

    Filter Sheets - 20 cm x 20 cm (2-3 Micron)

    3 reviews

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. 20cm x 20cm filter pads made for 20x20 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering.

    $61.99 - $799.99

  • Funnel - Vintage Shop - 25 cm (9.8) - White Plastic Funnel - Vintage Shop - 25 cm (9.8) - White Plastic

    Plastic Funnel | White | 25 cm | 10 in. | Vintage Shop

    Wide diameter funnel for large volume pouring. Inner groove can be used to install a funnel screen. Smooth inner surface for easy cleaning and sanitizing. Food grade plastic BPA free Max Temp Rating: 158°F (70°C) See below for full funnel specs.

    $10.99

  • Anvil Mash Paddle Anvil Mash Paddle

    Anvil Mash Paddle Stainless Steel - 24 in. (With Holes)

    2 reviews

    Heavy duty 16 gauge stainless steel commercial grade spoon is 21" long and will last an eternity. Twice the thickness of most imported spoons. The convenient hang hook lets you rest it on the kettle or just about anywhere.  

    $31.99

  • Blichmann Chiller Coil - 14 - 42 gal Fermenator Blichmann Chiller Coil - 14 - 42 gal Fermenator

    Blichmann Cooling Coil for 14 to 42 gal Fermenator

    12 reviews

    Use this coil to make a cooling system for your 14 to 42 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Tall Cooling Coil fits 14 to 42 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 13.5" tall x 9" diameter

    $119.99

  • Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket Distillation Lid w/ Gasket for 35L BrewZilla / DigiBoil (47mm Hole) - 6 mm Gasket

    Distillation Lid for 35L BrewZilla / DigiBoil | 6mm Gasket

    24 reviews

    Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120or DS130) to make your own easy-to-use distillery. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 12.25" in diameter. Kegland Part number: KL03483

    $38.49

  • Double Laser Infrared Thermometer Gun Double Laser Infrared Thermometer Gun

    Double Laser Infrared Thermometer Gun

    2 reviews

    Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.   KegLand Item Number: KL21883  

    $38.49

  • Blichmann 1/2" T.C. Gasket Blichmann 1/2" T.C. Gasket

    Blichmann 1/2 in. Tri-Clamp Gasket

    2 reviews

    This is a Blichmann Spare Part. 1/2" tri-clamp gasket. This is the gasket used on the Blichmann Fermenator's racking arm. Note: Each order comes with one gasket.

    $1.79

  • CoolStix 3-Hole Silicone Carboy Hood CoolStix 3-Hole Silicone Carboy Hood

    BrewBuilt® CoolStix™ Hood for Glass Carboys

    4 reviews

    Please note: This hood was designed for use with the BrewBuilt CoolStix which has been discontinued. Two of the holes are for an airlock and thermowell, but the third 1/2" hole was intended for the CoolStix and you will need to plug it or utilize it how you see fit. This silicone 3-hole carboy hood is used alongside the BrewBuilt CoolStix. The holes are for a 1/2" CoolStix, an airlock and a carboy thermowell. The holes measure 0.500", 0.413", & 0.375" Compatible with smooth neck carboys only. Does not fit Italian threaded neck carboys.

    $8.99

  • Funnel - Ferrari - 35 cm (13-3/4 in) - White Plastic

    Plastic Funnel | White | 35 cm | 13.75 in. | Ferrari

    Plastic funnel, top measures 35 cm (13-3/4 in) wide. Large funnel perfect for wine making or beer making.   Made in Italy by Ferrari.

    $21.99

  • DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER DigiBoil Complete Still Kit (35L) - Copper Pot Still Condenser - PLACEHOLDER

    35L DigiBoil Still Kit with Copper Pot Still Condenser

    1 review

    Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 35L DigiBoil Electric Kettle and the Copper Pot Still Condenser. The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. Kit Includes: 35L DigiBoil Gen 2 (110V or 220V) 110V / 15A power and plug (5 ft. cord) 220V / 15A power NEMA 6-15 plug (5 ft. cord) Copper Reflux Still Condenser w/ Barb Connections 13 mm Inlet/Outlet Barbs (0.51 in.) Distillation Lid & Gasket Set of Adjustable Lid Clamps Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).

    $389.99

  • Erlenmeyer Flask - 125mL

    Erlenmeyer Flask - 125mL

    All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. Primarily used with our MT140 Economy Aeration-Oxidation System, this flask also makes a great addition to any home wine lab. Uses a #5 stopper (see below) In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)

    $9.99

  • AlcoEngine - Copper Reflux Still w/ Barbs AlcoEngine - Copper Reflux Still w/ Barbs

    AlcoEngine Copper Reflux Still Top w/ Barb Connections

    2 reviews

    The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit. If you want to make whiskeys and gins we recommend checking out the Copper Pot Still! This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL16162

    $169.99

  • Hydrometer - Brix (9 - 21) With Correction Scale

    Brix Hydrometer (9 to 21) With Correction Scale

    2 reviews

    Precise hydrometer for measuring the sugar content and progress of fermentation in wine ferments. Comes with a thermometer/correction scale built-in. 15" total length. Please Note: Due to the large size of this hydrometer, it does not work with our standard 11" or 14" hydrometer jars. We recommend using our 500mL Graduated Cylinder (MT636D) with this hydrometer.

    $79.99

  • 1/2" Blowoff Cane - SS

    Blow Off Tube (Stainless) - 1/2 in. OD

    6 reviews

    Tired of clogged airlocks from your intense and vigorous fermentations? Simply place one end in your stopper instead of your airlock and the other end into a bucket of water or sanitizer and worry no more. Made from stainless steel, making it durable and easy to clean. Specifications: Stainless steel 1/2" outer diameter 7/16" inner diameter (approximately) 19" Tall x 7.5" Wide

    $24.99

  • FermZilla Tri-Conical - Butterfly Valve - 3 in. x 3 in. T.C. FermZilla Tri-Conical - Butterfly Valve - 3 in. x 3 in. T.C.

    FermZilla Tri-Conical Butterfly Valve - 3 in. x 3 in. T.C.

    Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 3" T.C. fittings. This can be used on the bottom of your conical for a maximized dump valve or it can be used with a FermZilla T.C. Pressure Lid with 2" x 3" reducer and sight glass to make a massive hop injector. KegLand Part Number: KL27571

    $43.99

  • Plastic Beaker - 150ml

    Plastic Beaker - 150ml

    2 reviews

    A great, inexpensive beaker for lab work and taking samples with. Equipped with a pouring spout and conical shape that makes them stackable for storage. Made from polypropylene, won't crack or shatter if dropped!

    $3.99

  • Plastic- 1/2 in. MPT x  1/4 in. Barb

    Plastic Barb - 1/4 in. x 1/2 in. MPT

    3 reviews

    Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).

    $1.99

  • Stainless - Cross - 1/2 in fpt

    Stainless Cross - 1/2 in. FPT

    4 reviews

    Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.

    $7.69

  • SS False Bottom (9 in. Diameter)

    False Bottom Stainless Steel Domed - 9 in. Diameter

    7 reviews

    The perfect size for small batches!   This false bottom fits great inside a 5 gallon beverage container, like our Rubbermaid coolers, or any container with at least a 9" opening at the top - such as a bucket. It can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

    $38.49

  • Laboratory Wash Bottle Laboratory Wash Bottle

    Laboratory Wash Bottle

    2 reviews

    A handy addition to any Home Lab, this wash bottle is great for cleaning out pipettes after use, rinsing pH electrodes and cleaning out components of your Aeration/Oxidation set. Also fun to squirt people with!

    $17.99

  • Graduated Cylinder - 10mL

    Graduated Cylinder - 10 mL

    2 reviews

    These 10 ml glass graduated cylinders are used to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work. Around 8" tall.

    $14.99

  • Tubing - Reinforced Vinyl (3/4 in) - PLACEHOLDER

    Vinyl Tubing (Reinforced) - 3/4 in.

    2 reviews

    Reinforced vinyl tubing is the ideal beer tubing option for transferring your homebrew that is below 158F, and is also great for water applications (such as to and from your wort chiller). This food grade 3/4 in ID Reinforced Vinyl Tubing is rated to 158 degrees F, and 150 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is essential when putting back pressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used.  

    $16.99 - $264.99

  • Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb Stainless - 3/8 in. BSPP Male x 10 mm Hose Barb

    Stainless Barb - 3/8 in. Male BSPP x 3/8 in.

    2 reviews

    This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

    $3.29

  • Sale -35% RAPT - 4mm - 2M Extension Probe for RAPT Fridge RAPT - 4mm - 2M Extension Probe for RAPT Fridge

    RAPT Fermentation Chamber | 6.5 ft. Extension Probe

    If you are looking to measure the temperature of your fermentation directly from the wort, simply install this extension probe into your RAPT Fermentation Chamber. The RAPT is designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature-controlled environment which gives you the most even temperature and most precise control of your fermenter. This 2m (6.5') Extension Probe allows you to easily measure and control the temperature from right inside your fermenter, allowing for super precise readings throughout the fermentation. This is a simple plug-and-play fitting for your RAPT. For the highest accuracy, run through a 2-point calibration in the settings menu. The probe diameter is 4 mm (0.15"). KegLand Part Number: KL22460  

    $3.29 $2.13

  • LaMotte Water Test Reagent - Sodium Hydroxide Reagent with Metal Inhibitors LaMotte Water Test Reagent - Sodium Hydroxide Reagent with Metal Inhibitors

    Sodium Hydroxide Reagent with Metal Inhibitors - Lamotte Water Test Reagent (4259-E)

    Replacement Sodium Hydroxide Reagent with Metal Inhibitors (4259-E) for the Lamotte Water Test Kit (7189-01). 

    $11.30

  • BrewBuilt Thermometer - 6" stem x 3" dial, 1/2" MPT BrewBuilt Thermometer - 6" stem x 3" dial, 1/2" MPT

    BrewBuilt® Thermometer | 3" Dial Face | 6" Probe

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 6" Stem here is perfect for Mash Tuns, as it will reach further into the mash to get a more representative reading. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 6" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

    $59.99

  • #5 Rubber Stopper - 2 holes #5 Rubber Stopper - 2 holes

    #5 Rubber Stopper - 2 holes

    Rubber stopper for use with the MT140 Economy Aeration-Oxidation System. Top Outside Diameter (OD) 27mm Bottom Outside Diameter (OD) 23mm Height 25mm  

    $5.99

  • GrainFather Conical - Wireless Temperature Controller

    Grainfather Conical - Wireless Temp Controller

    2 reviews

    PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the standard Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided below. Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) of your Grainfather Conical Fermenter remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about. This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket.    

    $149.99

  • BrewBuilt Kettle Gen 2 with 3 x T.C. Fittings - PLACEHOLDER BrewBuilt Kettle Gen 2 with 3 x T.C. Fittings - PLACEHOLDER

    BrewBuilt® Brewing Kettle | 1.5" Tri-Clamp | Triple Port

    1 review

    Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Front and back located handles with silicone grips Induction burner compatible Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are three welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.   Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.   This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.   This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.     Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.    Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.   Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.     Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!   Features: Three welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 Stainless construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading Silicone coated handles for heat protection 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting     SKU Size Kettle ID (in.) Height (in.) BE581 10 13.78 16.54 BE582 15 15.75 18.90 BE583 20 17.72 21.26 BE584 30 19.69 23.62 BE585 50 23.62 28.30   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

    $299.99 - $419.99

  • Glass Wine Thief - Barrel, Bent

    Glass Wine Thief - Barrel, Bent

    8 reviews

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in mid February. Heavy Duty Glass Wine Thief -- 18" long, 1.25 inches thick, with glass "D" handle and bent to work with stacked barrels. Very sturdy and perfect for sampling for testing as well as for winery events.  Because of the larger diamter and volume, this unit will not fit into the neck of glass carboys.  

    $114.99

Frequently Asked Questions

Beer Brewing Equipment Collection Article +

Home Brewing Beer Making beer at home is easy, rewarding and can lead to some amazing friendships & interactions. Like most people I started brewing at home with beer brewing kit from MoreBeer! The kit came with everything I needed to brew a batch of beer at home. Typical of most homebrewing starter kits, the equipment and beer recipe ingredients where for extract brewing. I know a lot of people that just dived right into all-grain brewing and there is nothing wrong with that approach. For myself and what I recommend to others as well is starting with extract brewing. It allows you to focus on a few steps in the brewing process as you are essentially starting from the boil. I think the old saying crawl, walk, run applies beautifully to learning to brew and most anything in life. By starting with extract you can focus on, in my opinion the two most important things in brewing; cleaning / sanitation and fermentation. Not to say can’t jump into all grain brewing and give these topics the respect they deserve. It’s just a lot easier to focus on and learn a few things at a time. After all you don’t eat an entire pizza at once, you have one slice at a time. Once you have brewed a few batches of extract beer a good natural progression is to try what they call a mini-mash. This essentially allows you get some of your sugars from mashing grains but still back it up with liquid or dried malt extract. Aside from allowing you to learn the brewing process in steps, it also allows you to upgrade your brewing system over time. Purchasing a complete all grain system can be expensive and if you’re just starting a new hobby it’s nice to spend as you go. However with systems like the RoboBrew/BrewZilla, getting started with all-grain brewing has never been more affordable and accessible.  When I started brewing these type of systems were not available though. Either way, most extract brewers move to all-grain brewing; as it allows you to take complete control over your beer recipe and intern the finished beer your making. Another topic worth mentioning is the social aspect of beer & brewing. We all know beer is a social drink, heck this country “The United States” was founded in pubs by revolutionary individuals. Sure it’s fun to sit back and enjoy a pint of a beer you made. But it’s even funnier to share a pint with friends and family. That leads to another great way to learn and improve your brewing, joining a homebrew club! For the first few years of my brewing career I brewed alone and only shared by creations with family and friends. It wasn’t until I was selling some homebrew equipment on the internet that I was directed towards joining a homebrew club. The person purchasing equipment from me asked if I was aware of the local homebrew club. It really never crossed my mind to seek out or join a club, but let me tell you; it was one of the best recommendations and things I could have ever done. Not only do you meet and network with likeminded brewers like yourself; the friendships that have come from the club have not only enriched my life it has my family as well. I know being social may not be for everyone, but meeting and speaking with other brewers is a great way to get More! out of an already amazing hobby! Regardless of your brewing path, be it extract or all grain or alone or with others; always remember to keep learning and have fun brewing, cheers!

BEER Collection Article +

What is Beer? Beer is a delicious alcoholic drink that is made by yeast, fermenting a malt sugar & water mixture that is typically flavored with hops. It has been brewed since the dawn of civilization, in fact, it’s even been credited for saving the world by some scientists and historians. The earliest evidence of beer production dates back to about 3500 BC. However, there is speculation that it was being produced as far back as 10,000 BC when humans first started farming malts. The ancient Sumerian text "The Hymn to Ninkasi" is a prayer but could also be considered the earliest written beer recipe. For thousands of years fermented malt beverages were being consumed by numerous civilizations, but none of them really resembled what we know as Beer today.  It wasn’t until 1516 AD in Bavaria when the Reinheitsgebot (Beer purity law) was adopted that it started to look, smell and taste like the alcoholic drink we all know and love today. The Reinheitsgebot is actually credited as the oldest food-quality regulation in history and is still in use to this day. It states that the only allowed ingredients in Beer are water, hops and malted barley.  Today, Beer is the third most popular drink in the world with only water and tea in front of it. Cheers to a long history, a bright future and another round of our favorite drink, BEER! Types of Beer One of the reasons it's is so popular is that there is literally something for everyone. Beer styles can range from sweet to bitter or even sour and everything in between. Beer is commonly categorized into two varieties: Ales and Lagers . An Ale is produced with a top fermenting yeast called Saccharomyces cerevisiae. This strain of yeast typically clumps together and rises towards the top of the fermenter. The recommended fermentation temperature range for ale yeast is between 15–25°C (59–77°F). Ale yeast is known for its higher ester production that is commonly described as “Fruity” and comes across as apple, pear, pineapple, etc. A Lager is cool fermented and produced with a bottom fermenting yeast called Saccharomyces pastorianus. This strain is typically fermented around 7–12°C (45–54°F) and then aged at even cooler temps for several weeks or up to several months. The original German word lager means “storehouse” representing this cold storage step, but now the term is synonymous with a beer style and not the literal interpretation. Less popular than the two previous styles, but none less delicious, is the Lambic styles of Belgium , also called “Wild” or “Mixed Fermentation” in regions outside of Belgium. These styles are fermented with a Saccharomyces strain of yeast as well as Bretttanomyces and Lactobacillus bacteria. This use of bacteria gives them a sour or “funky” taste. These three high level classifications are only the tip of the iceberg when it comes to beer styles. In fact, there is an organization called the BJCP ( Beer Judge Certification Program ) that was founded in 1985 to encourage the knowledge and understanding of the world’s diverse styles. As of their last published style guidelines, there are 34 top level styles with over 100 substyles categorized. And with how popular craft beer has become lately, this list of recognized styles will only continue to grow. Making your own Beer If you found this page and read your way down to this section you obviously love and enjoy beer. In our experience one of the most enjoyable beer is the one you made yourself. Not only is it very rewarding and enjoyable it’s super easy to get started making your own beer at home . You can start with just a few pieces of brewing starter equipment and make amazing beer. Just as types can be boiled down (pun intended) to two high level classifications, so can brewing beer. These types are called Extract Brewing and All Grain Brewing . Extract brewing is what most home brewers start with due to it requiring less equipment and fewer process steps overall. With extract brewing you primarily just need a boil kettle and a fermenter . A majority of the malt sugars you will be fermenting come from an “Extract ”, LME ( Liquid Malt Extract ) or DME ( Dried Malt Extract ) hence the name. With all grain brewing you need a few more pieces of equipment as you will be creating your own malt sugars from scratch using crushed malted grains. In most traditional all grain brewing systems you have three vessels, a HLT (Hot Liquor Tank), MT (Mash Tun) , BK (Boil Kettle) and a Fermenter. There is also a hybrid approach called BIAB (Brew In A Bag) that allows you to perform an all-grain brew in a single vessel. With extract brewing, a typical brew day takes about 2-3 hours from start to finish, whereas all grain brewing typically takes about 4-6 hours. Both types of brewing can create amazing results and have different advantages to them. To learn More! about brewing in general click the Brewing button below.

Login

Forgot your password?

Don't have an account yet?
Create account