Beer Brewing Equipment & Supplies

The perfect Tilt for homebrewers with stainless steel fermenters Track your fermentation progress without ever disturbing your wort! Say goodbye to pulling samples for your glass hydrometer 2 to 3x more powerful than the standard Tilt for improved signal transmission through stainless steel Slim design to easily recover the Tilt Pro Mini in small tanks with 1.5" tri-clamp dump ports When the first Tilt hydrometer was released in 2016, most of the home brew fermentation vessels on the market were either glass carboys or plastic brew buckets. Now we see more and more small-scale stainless steel. The problem is stainless isn't that great of a window when it comes to wireless data transmission. The Tilt Pro solves this problem, though it might be bigger than what you need. This is where the Tilt Pro Mini comes in with its smaller size and price and easy recovery in smaller tanks with 1.5” dump ports along with Tilt Pro features like long range (maximum allowed by FCC) and increase in sensor resolution, it takes homebrewing to a new level. The Tilt Pro Mini can be used with the same Tilt 2, Tilt Pi, and other Tilt apps and 3rd party hardware and software as the standard Tilt and Tilt Pro hydrometers. You can even use a standard Tilt and Tilt Pro Mini together if they are the same color in the Tilt 2 app, so run up to 16 different Tilts at once in the Tilt 2 app with 8 standards and 8 pro minis. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download. Specifications: Size: 1.13" Diameter x 4.51" Tall Will pass through a 1.5" Tri-Clamp drain for easy recovery Weight: 2.3 oz Specific Gravity Measurement Range (pre-calibrated): 0.9900 - 1.1200 (possible to user calibrate up to 1.2000) Specific Gravity Resolution: 0.0001 Temperature Measurement Range: 0°F - 185°F Temperature Resolution: 0.1°F Battery: User-replaceable, single use CR123A Li-MnO2 lithium battery 3.2v (max) Not compatible with rechargeable battery Wireless Range: 300 feet when floating in pint glass of water and 20 feet floating in 5-gallon stainless steel keg Approximately 2-3x standard Tilt and about 80% of Tilt Pro range

Read more less

These 10 ml glass graduated cylinders are used to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work. Around 8" tall.

Read more less

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. Primarily used with our MT140 Economy Aeration-Oxidation System, this flask also makes a great addition to any home wine lab. Uses a #5 stopper (see below) In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)

Read more less

Reinforced vinyl tubing is the ideal beer tubing option for transferring your homebrew that is below 158F, and is also great for water applications (such as to and from your wort chiller). This food grade 3/4 in ID Reinforced Vinyl Tubing is rated to 158 degrees F, and 150 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is essential when putting back pressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used.  

Read more less

A great, inexpensive beaker for lab work and taking samples with. Equipped with a pouring spout and conical shape that makes them stackable for storage. Made from polypropylene, won't crack or shatter if dropped!

Read more less

If you are looking to measure the temperature of your fermentation directly from the wort, simply install this extension probe into your RAPT Fermentation Chamber. The RAPT is designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature-controlled environment which gives you the most even temperature and most precise control of your fermenter. This 2m (6.5') Extension Probe allows you to easily measure and control the temperature from right inside your fermenter, allowing for super precise readings throughout the fermentation. This is a simple plug-and-play fitting for your RAPT. For the highest accuracy, run through a 2-point calibration in the settings menu. The probe diameter is 4 mm (0.15"). KegLand Part Number: KL22460  

Read more less

The perfect size for small batches!   This false bottom fits great inside a 5 gallon beverage container, like our Rubbermaid coolers, or any container with at least a 9" opening at the top - such as a bucket. It can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

Read more less

Replacement Sodium Hydroxide Reagent with Metal Inhibitors (4259-E) for the Lamotte Water Test Kit (7189-01). 

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

Read more less

Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 3" T.C. fittings. This can be used on the bottom of your conical for a maximized dump valve or it can be used with a FermZilla T.C. Pressure Lid with 2" x 3" reducer and sight glass to make a massive hop injector. KegLand Part Number: KL27571

Read more less

Wide diameter funnel for large volume pouring. Inner groove can be used to install a funnel screen. Smooth inner surface for easy cleaning and sanitizing. Food grade plastic BPA free Max Temp Rating: 158°F (70°C) See below for full funnel specs.

Read more less

The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit.  It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit. If you want to make whiskeys and gins we recommend checking out the Copper Pot Still! This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet.   Kegland Part number: KL16162  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Heavy Duty Glass Wine Thief -- 18" long, 1.25 inches thick, with glass "D" handle and bent to work with stacked barrels. Very sturdy and perfect for sampling for testing as well as for winery events.  Because of the larger diamter and volume, this unit will not fit into the neck of glass carboys.  

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 6" Stem here is perfect for Mash Tuns, as it will reach further into the mash to get a more representative reading. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 6" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

Reinforced silicone tubing offers higher temperature tolerances and chemical resistance while remaining flexible and easy to handle. Ideal for both cold side and hot side processes and high-pressure applications. Although braided, the tubing remains transparent to allow you to visually inspect the flow of liquids. 1/2" inner diameter 3/4" outer diameter Odorless, tasteless and inert Polyester heat resistant fiber reinforcing braid Good electrical and weatherability properties Resists UV, Ozone, gases, and moisture Working Temperature: -76°F–500°F Working Pressure: 0-150 psi KegLand Part Number: KL25300

Read more less

Rubber stopper for use with the MT140 Economy Aeration-Oxidation System. Top Outside Diameter (OD) 27mm Bottom Outside Diameter (OD) 23mm Height 25mm  

Read more less

Temperature control is a very important part of fermentation for optimal flavor and control and quality of the finished beer. With the ANVIL cooling system, you wont be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller, and if desired an insulation jacket for your carboy.   System Includes: Sanitary Stainless Steel Cooling Coil 12" Sanitary Stainless Steel Thermowell 4 Hole #7 Stopper Submersible Pump - 12V DC Max Head - 16 ft  Cooling Hose  Controller Airlock Anvil Temperature Controller  

Read more less

Replaces the circular top inlet of the MaltZilla to allow for easier adding of grains. This product is still in development. Details will be added as they become available. Hopper only. MaltZilla and Base Board sold separately.    

Read more less

This 50 mL glass graduated cylinder is lab grade, and allows you to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work. This cylinder is approximately 8.5" tall.

Read more less

A handy addition to any Home Lab, this wash bottle is great for cleaning out pipettes after use, rinsing pH electrodes and cleaning out components of your Aeration/Oxidation set. Also fun to squirt people with!

Read more less

The easiest way to power the BrewBuilt™ SlingBlade! This professionally wired watertight switch gives you a simple On/Off control of your heating element. Switches both legs of a 220V 30AMP circuit and comes with 5 ft. input and output cords with molded LP6-30P ends. It also features two handy tabs for mounting to a wall. Don't wear out your expensive plugs and sockets hot patching your 220V burner elements. Plugging your element directly into a live power outlet will cause a small spark, and when done repeatedly this can damage the plug and the socket, especially with high voltage 220V appliances. Not only is the power switch more convenient to turn your element on and off during the brew day, it will eliminate the risk of damage done by hot patching.  

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Front and back located handles with silicone grips Induction burner compatible Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are three welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.   Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.   This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.   This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.     Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.    Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.   Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.     Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!   Features: Three welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 Stainless construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading Silicone coated handles for heat protection 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting     SKU Size Kettle ID (in.) Height (in.) BE581 10 13.78 16.54 BE582 15 15.75 18.90 BE583 20 17.72 21.26 BE584 30 19.69 23.62 BE585 50 23.62 28.30   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

If you prefer a hoppy beer, you’re likely concerned with keeping the hops in your boil kettle and out of your fermenter during your home brewing. The Blichmann Hop Blocker is a handy brewing accessory that promises to keep those hops out of the fermenter and securely in the boil kettle, all without disrupting the rest of the brewing process.   Through rigorous and repetitive testing, Blichmann Engineering has determined that the 90 percent to 95 percent of the hop material is left behind when using the Blichmann Hop Blocker to transfer your brew to the fermenter. While many traditional screen filters draw from the bottom of the kettle and often plug the screen, the Hop Blocker drains the majority of the wort from the top down, enabling the hops and trub to settle undisturbed at the bottom of the kettle. The filter works on just a small portion of the wort instead of the entire thing, making it much less disruptive.   The Blichmann Hop Blocker is designed for use with pellet hops only, not with whole, loose hops, as those could clog the Hop Blocker.  

Read more less

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 1/4" or 5/16" ID tubing to 3/8" ID tubing. The 3/8" barb is slightly oversized at 10 mm (0.39"). Made from 304 stainless steel.

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the standard Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided below. Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) of your Grainfather Conical Fermenter remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about. This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket.    

Read more less

Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg. Notes: You need to wind/unwind the end of the valve to adjust the pressure. It sometimes comes threaded all the way on from the manufacturer occasionally. Wrap a towel around the end piece(about 1/4 in) and clamp down on it while twisting the wrench fitting on the bottom(closest end to the Gas In QD) to loosen it. Then finger tighten or loosen to desired pressure.

Read more less

The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.   Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.   Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.   Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.   Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.   Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs  

Read more less

Plastic funnel screen for use with 40 cm plastic funnels (BE479). Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.

Read more less

This is a 304 Grade Stainless Steel Ball Valve 1/2 BSP Female x 1/2 BSP External Welded Thread. Often used to convert a keg into boil kettle, also known as a keggle. Includes: 1 x 1/2" Ball Valve with 1/2" BSP male & female thread 1 x Recessed 1/2" Nut 1 x Silicone Washer (used on the inside of vessel)  

Read more less

Anvil Brewing Equipment brew kettles are as durable as they get, with the 5.5 gal version fitting well on a stovetop and the larger versions sitting nicely on the Anvil high performance burner. This rugged kettle is constructed from high quality materials and is designed for a lifetime of demanding use.   Standard Features Include:   -Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning. -Induction capable tri-ply clad bottom. -Internal etched level graduations in gal and liters for accurate measurements -A dual scale F/C thermometer – included standard! -Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations! -Lid conveniently rests on kettle handle -Ideal 1.2 height to diameter ratio for optimum brewing performance -Purpose built stainless steel ball valve with integral bulkhead seal is rock solid, easy to install and disassemble, and will never leak. -Dip tube drains to within 3/8” of the bottom of the kettle.   Anvil Brewing Equipment provides everything you need in a brew kettle! But if you want more, add a boil kettle strainer for the ultimate in hop and trub filtration or convert your Anvil Brew Kettle to a mash tun with our optional perforated false bottom.   SKU Size Kettle ID (in.) Height (in.) BE340 5.5 12 11.625 BE341 7.5 12.75 14 BE342 10 13.75 16.75 BE343 15 16 19 BE344 20 17.75 21.25   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Male Kent QD with 1/2" MPT on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel External pump kit for recirculating mash will improve efficiency, consistency, and clarity DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 1500W of power The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. With the Recirculation Pump Kit, you can recirculate sweet wort during the mash to improve starch conversion, maintain a consistent temperature throughout the mash, and improve the clarity. The pump can also be used to move water around your brewery if you use a secondary vessel to hold sparge water, or to transfer the wort from your kettle to your fermenter. With the optional Whirlpool Arm, you can also swap out the Recirculation Arm and use your pump kit to whirlpool after the boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. One advantage that this setup has over the BrewZilla is that the pump is external. This makes cleaning and fixing pump issues much easier, as you can quickly take apart the pump head to clean and clear out residual gunk at the end of each brew day. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  DigiBoil Features: 304 stainless steel construction 9-gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W DigiMash Stainless Steel Accessory Pack Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Recirculation Pump Kit Includes: High temp magnetic drive pump Recirculation arm with male camlock Female camlock with barb fitting 1/2" FPT x 1/2" barb fitting 1/2" MPT x 5/8" barb fitting 1/2" ball valve 5 ft. length of silicone tubing 4 x hose clamps Plumber's tape  

Read more less

Upgrade your base X2 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. Not compatible with the X2 Jacketed Uni conical or X1 Uni conicals.  

Read more less

Perfect for 5 to 20 gallon batch sizes. 3 7/8'' wide at the widest point. You will need our high-pressure, adjustable pressure regulator to operate burner. This is a ring style burner and not a jet burner. The flame distribution and control is great and not concentrated like a jet burner. Will not work with low pressure propane (house propane) or with natural gas. Ideally you want to install these about 4-6 inches below the kettle. These burners do not come with a brass jet. If you need the brass jet for attaching regulator tubing with flare outputs please purchase the H205J. If you intend on plumbing these you will need either a GSS008 or H233 to connect to your gas system. These item is not intended for indoor use.

Read more less

Hand-made by local artists right near our headquarters in Berkeley, California. This is our best thief by far and is our staff favorite.  You can just feel the quality and craftsmanship of the piece when you pick it up.  It has that kind of weight to it.  Tested in our wine room and tested in the field.  You cannot go wrong with this piece whether you are a pro wine maker or a home winemaker who makes professional quality wine. We have been selling this same thief for years now, and it's ideal for sampling wine from glass carboys or barrels. Taking a sample out of a barrel just feels right with this tool. This hand-blown glass wine thief holds approximately 50 ml of liquid -- the perfect amount for sampling and using for testing. This is the thief you dream about! Approximate dimensions 3/4 in. diameter x 1 ft. long before the bend.  

Read more less