Beer Brewing Equipment & Supplies

The largest hydrometer jar we carry perfect for use with our specialty Brix hydrometers.  Especially great for winemaking where the larger diameter is nice and the sample will be returned the ferment anyways.   Approx Dimensions: 14.25" H x 2" ID

Read more less

Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is unthreaded.

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump model has 1.5" tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Inline Pump Head Food Grade up to 250° F 1.5" tri-clamp inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!    

Read more less

This is a super cool bottle for making yeast starter wort. Mix DME and water to make your wort and then boil in the microwave with the cap off. Remove from microwave, thread on the cap while still hot, and place in refrigerator. Store the wort till you need it.  When you are ready to make a starter remove from refrigerator to warm up, pour into a sanitized flask, and add your yeast. Make multiple bottles all at once at store in your refrigerator until needed.  This reagent bottle is made from durable borosilicate perfect for storing anything you need. Borosilicate is great because unlike ordinary glass it won't crack with rapid changes in temperature. KegLand Item Number: KL04022  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This cast iron wide-profile banjo burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. Adjusted for efficiency this banjo burner produces around 70,000 BTU/hr, and in full, this banjo burner mode produces 100,000 btu.  Banjo burners can often times have issues when using with low flame output.  We sourced and tested a number of different units, before settling on this one, which performs great at low output.  Uses 3/8" male flare fitting (included). Comes with steel orifice plate for regulating airflow The burner has a 9 7/8" diameter and is 14 3/4" long This banjo burner requires a propane regulator to function properly.  We recommend a Wind Guard with these units if brewing outdoors.  If using indoors, you must have proper ventilation in the form of an overhead cooking hood.

Read more less

Replacement Hardness Reagent #6 Tablets (4484-J) for the Lamotte Water Test Kit (7189-01). 

Read more less

Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Installation & Use: Place the false bottom inside the kettle Install the wire support in the channel located at the top of the kettle Place the mesh screen inside the malt pipe and attach the handle Lower the malt pipe into the kettle so it rests on the wire support Fill with strike water and heat to desired strike temperature When desired temperature is reached, add grain and stir until well mixed When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F) When you're done collecting your wort, remove the malt pipe and proceed to boil   Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain.   Kegland Part Number: KL13055

Read more less

9" float rod extension for the Blichmann AutoSparge. Made from 304 stainless.

Read more less

Upgrade standard and Plus model X-Series conicals with increased cooling performance Chill down to cold crashing temps when used with glycol and insulation; compatible with any vessel with a 4" T.C. opening Keg Connects and Floating Racking Buoy enable you to pressure transfer the clearest beer at the top of your fermenter 1.5" tri-clamp ferrule for use with additional T.C. accessories like the Pressure Fermentation Kit or Hop Bong Sanitary all stainless steel construction with 3/8" OD inlet/outlet for glycol connection Upgrade your standard model X-series conical with the ultimate in-solution chilling coil—the BrewBuilt Ludicrous Coil! Temperature control is one of the most important aspects of a healthy, happy fermentation. When your fermenting beer gets too hot, the yeast will likely impart off-flavors that can easily overwhelm the taste of your finished beer. The Ludicrous Coil offers a ludicrous amount of surface area (which means more cooling capacity) compared to other chilling coils you'll find. Not only does it manage your fermentation temperature with ease, the Ludicrous Coil has the capacity to chill beer to cold crashing temperatures when used with glycol and insulation. A truly unparalleled unit when it comes to in-solution chilling. You will also need a cold water source to provide the cooling solution. For maintaining ale temperatures, a cooler or bucker of ice water is sufficient in most cases and this method works well with the BrewBuilt Chiller Pump Kit. For maintaining lager temperatures or cold crashing, we recommend the IceMaster Max 2 Glycol Chiller and the Insulated Tubing Set. Sanitary all stainless steel construction with 3/8" OD inlet/outlet. Compatible with 3/8" ID flexible tubing & hose clamps or 9.5mm Duotight adapter. Specifications: Size Coil Height Float Tubing Length 7/14 Gal 18.5" 24" 27 Gal 24" 30" 38 Gal 33" 39"  

Read more less

Small diameter tubing intended for use with water filtration systems and RO systems 150 PSI pressure rating—well-suited to handle your mains water pressure Made from polyethylene. BPA & plasticizer free Compatible with all Duotight and Monotight fittings with 6.35mm ends This PE (polyethylene) tubing is not only BPA and plasticizer free but it's also NSF approved. Suitable for pressures up to 150 PSI so it will have no problem handling your household's mains water pressure. This type of tubing is commonly used with water filtering systems and reverse osmosis (RO) systems. Compatible with the KegLand Solenoid Valve. Can be used with the 6.35mm Duotight In-Line Regulator to drop your mains water pressure if needed. This tubing is compatible with all Duotight and Monotight fittings with 6.35mm ends. Specifications: 5/32" ID x 1/4" OD (4mm x 6.35mm) 33 ft. Roll Pressure rated to 150 PSI Made from polyethylene BPA & Plasticizer free NSF approved KegLand Part Number: KL11143

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.  

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 26"L x 18"W x 26"H, 11 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

#12 natural latex rubber stopper with 3/8 inch hole. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Top diameter 64 mm, bottom diameter 54 mm, length 27 mm

Read more less

Filter beer like the pros, only on a smaller scale. Most small breweries and wineries use a large plate filter system to achieve clear beer or wine. Now you can do the same at home. Our new plate filter has a larger surface area, which means more yeast and particulate extraction. Each filtering session requires two filter pads at a time, and each pad must be the same micron to work. The product is pushed into the housing at 5 PSI and passes on either side of the plate filter housing, then gets forced through the filter pads to the center, where it is pushed out into your awaiting collection vessel, such as a keg or tank. Includes 2 X 24" long hoses (5/16" ID x 7/16" OD) Made from ABS plastic. Temperature rated to 167°F (75°C).

Read more less

Size 1 1/2" - 1 13/16"

Read more less

Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.

Read more less

KegLand put an exceptional amount of time into the research, testing, and development of the MaltZilla, and what they came up with is a motorized grain mill unlike anything we've seen before. It features an integrated motor so you'll never have to mess with a hand crank or power drill to spin the rollers. And the rollers themselves are made with a diamond-impregnated surface that offers superior performance and longevity compared to conventional knurled steel rollers. The integrated 24V motor is powerful enough to chew through popping corn kernels with ease, and works on voltages from 12-30V DC. The higher the voltage the faster the rollers spin, although we recommend 24V for optimum speed and grist results. The unit does not come with a power supply. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug (CAN111), or with a 6 ft. long cord with Anderson plug and alligator clips (CAN102). The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery.   Knurled Steel vs. Diamond Coated Rollers Your run-of-the-mill grain mills are often manufactured with steel rollers with a knurled finish. The knurling helps grip and pull the grain through the rollers, but even the knurling on hardened steel will go blunt eventually and hinder the mill's performance. Some manufacturers attempt to solve this problem by using geared rollers to better grab the grain, or add a third roller to the mill so the first two rollers with a larger gap force the grain into the third roller. These are only workarounds to the real issue—all steel rollers will go blunt eventually, especially if used with hard grains like wheat or corn. In a commercial setting, it’s not uncommon to send the rollers off to a metalworking factory to re-sharpen and re-knurl, but this is an expensive, time-consuming hassle. Many homebrew-scale users might just end up throwing the mill away and purchasing a new one.   The MaltZilla Diamond Mill is quite a different mill design, and it’s the first in the world to use diamonds impregnated into the surface of the roller. Even after many tons of grain are processed through the mill, the diamond surface will stay just as sharp as it was on day one. The sharpness of the diamonds draws grain exceptionally well, and even when hard grains are used the diamond rollers won't dull or slip in performance.   Sheer Instead of Chop Most mills require aggressive knurling to push into the grain and “chop” the grain as it passes through a tight gap, which means your grains are often chopped in half. The MaltZilla works on a different principle and gap setting is not as critical.  The MaltZilla uses impregnated diamonds to grip the surface of the kernel and the friction of pulling the grain through the gap causes a sheering action. When set up correctly, the sheering action can leave the entire husk intact, reducing the chance of stuck sparge and improve efficiency, while still opening the husk enough that the entire contents of the kernel is available to the mashing process. The 70 mm diameter rollers are double the diameter of many other mills, which significantly improves the crush and assists in drawing the grain in more effectively.   Integrated Motor You generally would not purchase a car without an engine, so why would you purchase a grain mill without a motor? Milling grain has an optimum RPM— too slow and it will take you a long time, too fast and you will end up with excessive powder. Hand cranking can be a pain in the backside, especially with larger grain bills, and using a power drill doesn't offer much in the way of speed control and adds the potential risk of burning out your drill. The MaltZilla has an integrated motor with a very constant RPM putting out optimum RPM with an integrated gearbox. The high torque and sealed construction make it ideal for a brewing environment, as the motor is well protected from moisture and grain dust.   The motor is seamlessly integrated into the side body of the mill. Being DC, the motor is safer than higher voltage AC, especially in an environment where splashing and hose spray are commonplace. The DC motor is also reversible so the direction of spin can be changed based on the polarity. This is particularly useful for over-mount and under-mount installation.   Over-Mount and Under-Mount Installation Traditionally, homebrew mills just sit on a board where they are moved from one bucket to another. The MaltZilla has multiple different mounting configurations. It can be over-mounted to a board like most mills are, but if you want a seamless finish to your garage/brewing area, you can mount the mill under your counter where it’s concealed and out of the way. Simply lift up a small opening in the top of your benchtop, drop in your hopper, pour in grain and run the mill.  When you're done, remove the hopper and conceal the opening.   There is also a MaltZilla PPE Base Board available for over the bucket installation or designing your own mill stand.   Grain Hopper This unit does not come with a grain hopper. We recommend using a large funnel with a shortened spout, or a repurposed gallon-sized water bottle. The MaltZilla Aluminum Hopper is currently in development and available for pre-order.   Specifications: Power: 12-30V DC Anderson Connector Plug Grain Inlet ID: 2-3/16" Grain Inlet OD: 2-3/8" Weight: 11 lbs KegLand Part Number: KL15776 Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

Read more less

Never need batteries again for your High Precision Series Scale. For our MT355. Input: 120V at 60Hz Output: 9V DC at 300mA

Read more less

Plastic funnel screen for use with 21 cm, 25 cm, and 25 cm Anti-splash plastic funnels. Fits our BE489, BE493, and BE498 Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.

Read more less

Stainless steel mash paddle with 60 inch long stainless steel handle.  These paddles are built to last a life time, and are great for doughing-in to deeper mash tuns with ease! Perfect nano-brewery mash paddle. 

Read more less

The construction of braided silicone enables the tubing to handle increased pressure applications. Reinforced silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow. 3/8" inner diameter, 5/8" outer diameter Open mesh polyester braiding incorporated within the wall of silicone tubing Made from FDA-sanctioned ingredients Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C) Odorless, tasteless, and inert Working Pressure: 94 psi Burst Pressure: 275 psi Platinum cured Conforms to FDA CFR 177.2600, NSF

Read more less

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 2400W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 220V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). If you have access to 220V power, this is definitely the unit we recommend. Although 110V power is enough to get up to boil, 220V will get you there faster and provide a much more vigorous boil. Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 220V / 15A power  NEMA 6-30R plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed DigiMash Upgrade Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen    

Read more less

The Ss Grain Mill sports an all-in-one design, featuring a hi-torque DC motor combined with a leveraged gear reduction system that drives a series of billet aluminum pulleys and high inertia rollers that make easy work of the toughest wheat and rye malts — Capable of up to 350 lb/h  Differential Speed Rollers Dating back to the early days of craft brewing, feed mills were often repurposed in breweries due to the lack of availability of milling equipment designed specifically for processing malt in brewing applications.  Conversely, in a home brew settling, corona mills, and other repurposed mill designs intentioned for processing raw grain in a home kitchen were adopted for their ease and accessibility.   Naturally, if you're feeding livestock or making grits, you typically want to pulverize the grain.  However, if you're brewing beer it’s preferable to crack the endosperm in several places and then sheer off the husk, keeping it mostly intact.  This shearing and crushing action maximizes both efficiency and lautering performance, reducing or eliminating the need for rice hulls or other lautering aids. The two rollers inside the Ss Grain Mill are both driven by the onboard motor, but designed to rotate at different speeds. This key feature is at the heart of our purpose built mill designed for home and pro brewing.   Machined Fluted Stainless Steel Rollers Other mills that are designed to pulverize grain, often rely on hardened steel knurled rollers to extend their usable life.  The shearing action of the Ss Grain Mill places less stress on the roller to effectively process the grain. We settled on the more professional approach of fluting the rollers, which enhances the ability for the two rollers to engage the malt and effectively shear the husk from the endosperm.  It was also important to us that this mill be functional in either a home or pro-environment, so we decided to cast the rollers in solid 304 stainless steel, with each roller weighing a robust 7.5 lbs.   Furthermore, the profile of the rollers has been completely rethought.  Most small mills rely on a wide processing envelope and a small, 1.5-2” diameter roller.  We have emulated the design of large production mills, and increased the diameter of the roller to 4”, and narrowed the processing envelope.  This design increases the rotating mass, and stores rotational energy, which ultimately helps to smooth abrupt changes in rotational speed.  Furthermore, the entrance angle is less aggressive with a larger roller, resulting in additional mechanical advantage.   Precision Gap Adjustment Eleven points of adjustment ranging from 0.5mm to 2.0mm open up a wide range of malt products. Gap adjustments are tool-less and can be made without any disassembly, or complicated procedures.   Extruded Aluminum Chassis The two piece extruded 6061 aluminum chassis promotes structural rigidity resulting in a more precise degree of roller alignment.  This is important to retaining consistent roller gap settings from batch-to-batch. Furthermore, the two-piece construction isolates the motor and rollers in separate chambers, preventing the motor and drivetrain from accumulating dust and debris. All rotational pulleys, and rollers have their own dedicated fully sealed ball bearings for low drag and long life.   25 lb. Hopper Capacity  The Ss Mill will include a custom tooled 4mm thick ABS hopper that is both structurally strong and lightweight. Designed to hold up to 25 lbs. of grain at a time, the Ss Grain Mill has been clocked in prototype testing at processing roughly 350 lbs. per hour of barley malt.  Which is roughly a 50 lb. sack every 8 mins, making it perfect for batch sizes from 5 gallons to 5 BBLs.   Features: All-In-One Design Differential Speed Rollers Machined Fluted Stainless Steel Rollers Precision Gap Adjustment Extruded Aluminum Chassis Specs: 350 lb/h 25 lb Hopper 0.5 - 2.0mm Gap Range 18" Width x 19.5" Height x 9" Depth Plugs into standard 110 volt wall socket. Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

Read more less

The Stainless Bucket Fermentor is the perfect fermentation vessel for 2.5 to 3 gallon batches. The small design enables it to easily fit inside a refrigerated unit.   Also available in 7.5 gallon size for 5 gallon batches.   Features: 304 Stainless Steel Coned Bottom Embossed Level Markings Rotating Racking Arm Includes Ball Valve, Airlock, and Stopper Liquid Crystal Thermometer Dimensions: Height - 14.75" to top of lid (Add 6.25" for airlock and stopper) Width - 14.5" handle to handle Depth - 13.5" including valve

Read more less

Anvil Foundry Recirculation Pump Kit for 6.5 / 10.5 gal units.   Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 1/2" Hose Barb on the other end for attaching any 1/2" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Male Plug, which can connect to any H501 Series Female Socket.  It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Male Plug Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

It may just look like an oversized keg at first glance, but the 1 bbl Kegmenter can do so much more! These stainless steel vessels are perfect as a pressure fermentation vessel, storage brite tank, or even a large-batch home still. Welded tri-clamp openings offer versatility for rigging up this unit however you see fit. Large 4" tri-clamp opening at the top and two 2" tri-clamps ports at the bottom. The large 4" opening at the top makes it easy to get inside the keg for cleaning, and the 2" ports at the bottom can be fitted with valves, heating elements, or other TC accessories and fittings. The kegmenter is well suited for use as a fermenter, brite tank, or top-up barrel. The 1 bbl Kegmeneter comes with end caps and clamps to plug the bottom ports, and a pre-drilled 4" cap for the top opening with a stopper and airlock included. You also have the option to use the Ball Lock Post lid with floating dip tube, which can be used for pressure fermentations or transfers. Also a 4" x 2" TC reducer would allow for adding a Reflux or Pot Still for distillation. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Specifications: Volume: 1 bbl (31 gal) Working Pressure: 3 bar (43.5 psi) Made from stainless steel 41" H x 15.5 Ø   Kegland Part number: KL04541  

Read more less

Narrow range brix hydrometer that allows for highly accurate measurement.  These hydrometers are excellent for use in the middle and towards the end of wine fermentation.  It features a built-in thermometer and correction scale for temperature correction of the reading. Thermometer measures a range of 30-150 F (0-50 C) with 1 degree resolution.  These brix hydrometers are calibrated at 68 F (20 C).

Read more less

This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.  

Read more less

These leg extensions allow the Anvil Brewing burner to raise to a height of 24". Now easily transfer to another container, such as a carboy, with just the use of gravity. You can also set up a 2 tier brew system.

Read more less

We developed this product to relieve pressure when we transferred or filtered beer from one keg to another. This connects to the keg you are filtering into and has adjustable relief valve for letting pressure off as the keg fills up. Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about  the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure.

Read more less