Free shipping on orders over $79!
Detecting your location...

Beer Brewing Equipment & Supplies

Welcome to one of the largest online shops for beer brewing equipment!  Get all of the beer making equipment you'll need to brew your own without spending a fortune with MoreBeer!’s wide selection of homebrew equipment. Our home beer making supplies are some of the highest quality available online, and they even come with free shipping when you spend $59 or more!

Our beer brewing kettles and burners are already set up for effective brewing and come in either standard or modified styles with added couplers. If you prefer to modify an existing pot instead, our weldless fitting kits will help you to do so without any complex welding. Wort chillers cool beer before you add beer yeast, while self-priming and magnetic drive beer pumps help to transfer your homemade beer from one vessel to another. From mashing to boiling to filtering, you’ll find all of the beer brewing equipment that you need for every step of the brewing process for a great low price from MoreBeer! 

 

 
Shop by collection
1058 products

  • Blichmann 1" Sanitary Bulkhead Tool Blichmann 1" Sanitary Bulkhead Tool

    Blichmann 1 in. Sanitary Bulkhead Tool

    1 review

    This is a Blichmann Spare Part. Replacement bulkhead tool for the Blichmann Fermenator. This tool is used to install the blow-off assembly.

    $5.86

  • Brew Bucket Mini - Replacement Base

    Replacement Silicone Base for the Brew Bucket Mini Fermenter

    Replacement silicone base for the Brew Bucket Mini Fermenter

    $21.95

  • Ss BrewTech - Chilling Coil Kit - 3.5 gal Brew Bucket Mini

    Chilling Coil Kit | 3.5 gal Brew Bucket Mini | Ss BrewTech

    1 review

    The Chilling Coil kit can be used to update the 3.5 gal Brew Bucket Minis for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller.  Features: 304 Stainless steel Immersion chiller coil Thick 5 mm zippered neoprene jacket FTSs designed lid included Weldless 200mm thermowell Included hose clamps (for chiller coil), 17mm stopper (for airlock) Specs: Assembled Dimensions: 17.5"H x 11.5"W x 11.5"D (on Bucket) Assembled Weight: 10lbs / 4.5kgs (on Bucket)  

    $99.95

  • Last stock! WilliamsWarn - BrewKeg25 Litre w/ Draining Sediment Bottle

    WilliamsWarn BrewKeg25 | Pressurizable Conical Fermenter | Draining Sediment Bottle | 25 L | 6.6 Gallon

    Ferment, carbonate, and serve finished beer all in one vessel Pressure ferment as high as 25 psi to reduce esters and produce clean lagers at ale fermentation temps Extra-large draining sediment bottle allows you to drop out hop matter and yeast throughout your process Avoid oxidation by skipping the kegging process entirely—simply hook up your draft system to the lid's ball lock posts! So the first thing to understand is that this is a Unitank - you will be fermenting and serving from the same vessel. The lid has an adjustable pressure relief that you can set to different pressures. More on that later while we first talk about why we are so high on these...  The #1 reason we love the BrewKeg Unitanks is that they eliminate kegging day, which saves a bunch of time. The Brewkeg25 is perfect for a 5-gallon batch, with plenty of headspace for vigorous fermentations. When fermentation is done, crank down the temp, remove the yeast/trub collection ball and start immediately drinking because the beer is already carbonated. Since this is not the standard brewing process, stop and think that over - you don't need a separate night or hours on a weekend morning to clean and keg. You are going to save 2 or more hours with every batch! Plus, you are skipping the most oxidative step in brewing of going from your fermenter to your keg. Yes, the one down side is that your fermenter is tied up as a keg but to many of us who really love brewing our own beer but are time challenged – the sacrifice is totally worth it.  Another great time saving feature is that you can skip wort cooling and 'hot pack' these kegs, literally filling them after boil at around 190°F. Stick them in your refrigerator, let them cool overnight, and pitch yeast the next day. Hot packing is gaining a lot of traction and we suggest you google the term to learn more. It’s been a standard practice in Australian homebrewing for years. We've been fermenting under pressure for years now with various pressurizable conicals, and if you want to make amazing lagers quickly you need to try it. Fermenting under pressure reduces esters and even beers fermented between 65-80°F have amazing German lager malt profiles. We've fermented a beer under pressure with WLP001 at room temp and all the tasters thought it was lager yeast. The pressure relief assembly, located in the center of the lid, is the slickest out there and adjusts from no pressure up to 25 psi. Leave it open for no pressure fermentations of ales and IPA's where you want the esters. Close it down to make amazing lagers under pressure, quickly. Features: Made from stainless steel Conical base Extra-large, easy to remove draining sediment ball 25 psi working pressure & built in relief valve 40 psi maximum pressure rating Ferments clean and clear beer from 64-82°F Beer is carbonated perfectly at the end of fermentation Beer ready to enjoy sooner Compact design fits in most kegerators Eliminates kegging Easy to clean and sanitize Dimensions: Height: 26 in. Diameter: 15.5 in. Actual Volume: 30L (7.92 gal)

    $659.99

  • Ss BrewTech - eKettle - Silicone Mat - PLACEHOLDER Ss BrewTech - eKettle - Silicone Mat - PLACEHOLDER

    eKettle | Silicone Mat | Ss BrewTech

    Replacement mat for eKettle Contoured to match the eKettle's footprint Black silicone construction Durable and easy to clean Prevents heat damage to brewing surfaces Prevents scratches from forming on the underside of the eKettle Reduces risk of burns when brewing on heat-conductive surfaces Included with eKettle purchase

    $16.95 - $21.95

  • Sale -20% Grainfather G70 V2 220V Grainfather G70 V2 220V

    Grainfather G70² | All Grain Brewing System | G70 V2 | Wireless Connectivity | 220V

    PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Thanks to the 70L (18.5 gal) capacity, homebrewers can produce more beer to share or commercial breweries now have a unit that's small enough for pilot testing. It also has a smart controller with built-in wireless connectivity and mobile app integration for step-by-step remote-controlled brewing. The G70² gives you everything you need in one compact package that can be used virtually anywhere. Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply. New Features on the G70²: The G70² features a perforated grain basket and the sight glass is now integrated into the recirculation pipework. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean. Perforated grain basket for an improved brewing experience with no top plate or additional pipework required. Integrated sight glass is now a part of the recirculation pipework for easy volume reading. 70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70² are matched by its bold, contemporary look and new smart brewing technologies. From the creators of the original award-winning all-grain brewing system, the Grainfather G70² represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 18.5 gal capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee. Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70² is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere. Features: Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 21 oz of hops and saw full flow through the pump. This is very effective. Bespoke 3.2 kWh concealed conical heating element. Make the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too. Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution. Bottom drain below the false bottom means minimal dead space. High temperature, high flow rate, food-grade pump. With an 2.1 gal per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70² unit. Convenient side entry recirculation. Rather than up and over, the G70² has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler. New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70² is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger. Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open. Automatic heat sensors and safety cut-out for dry boil protection. Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control. Glass lid with handle. Ball valve for sampling/draining. This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time. Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit. The large size means it needs to be positioned away from the G70², however this is made easy with longer silicone tubing attached as standard. Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket. Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 3.3 lbs, which also reduces pump load and blockages. Robust stainless steel body and excellent build quality. Specifications: 304 Grade stainless steel body 220 - 240V 18 Gal Capacity Max Grain Bill: 35 lbs Min Grain Bill: 18 lbs Powerful high flow pump: 15W

    $2,199.00 $1,759.20

  • Last stock! Low Pressure Propane Regulator

    Low Pressure Propane Regulator

    Low pressure propane regulator converts high pressure propane to low pressure propane. Designed for use with H212 and H209 burner only. This propane regulator does not come with the hose necessary to connect to the burner. You would need to have a professional plumber do the installation. Regulates to 11" W.C. (.4 PSI). Good to about 400,000 BTUs although we can not get an exact value from the manufacturer.

    $99.99

  • Blichmann BrewCommander - 240V Relay Module Blichmann BrewCommander - 240V Relay Module

    Blichmann BrewCommander™ Brewhouse Controller Relay Module

    The Relay Module is used to control multiple heating elements. The Relay Module will come with a jumper cable to wire between the relay module and the BrewCommander™ controller. 240v

    $218.99

  • Blichmann Power Controller - 120V Blichmann Power Controller - 120V

    Blichmann Power Controller (120V)

    1 review

    This amazing product is an ideal companion with Blichmann’s revolutionary BoilCoil™ immersion heaters, but it’ll also work with all manufacturer’s immersion heaters!  Blichmann’s unique modular power controller lets you precisely control the power of your electric heating element from 0-100% power.  Need to control more than one heating element for large kettles?  Simply add up to 4 additional relay modules and drive them all with one power controller.  Unlike cheap "dimmer switch" based power controllers, whose power output is not linear, the modular power controller is much easier to control the perfect boil intensity and heating rate.  This is accomplished using a tried and true industrial technique called Pulse Width Modulation (PWM).  Simply put, it controls the percentage of time the heater is energized over a very short 1 sec interval.  So turning the knob to “6” energizes the heater for 0.6 seconds, and turns it off for the remainder of the 1 sec interval.  This robust reliable technique is gentle on your heater, is extremely linear, and doesn’t create electrical noise like other techniques can.  See below for other great features. Precise linear control of power from 0-100% with a fast-acting intuitive power knob Industrial grade PWM control methodology is reliable, gentle to heating elements, and very linear Ideal for boil kettle and BIAB applications where temperature control is not needed, but precise power control is.  Note that this product does not read or control temperature Allows you to dial in an exact and repeatable boil off rate to hit your final boil volume batch after batch Perfect match for Blichmann’s BoilCoil™ electric heaters, but also works with any manufacturer’s immersion heater 30A 240V (7200W) single phase, and 20A 120V (2400W) models available L6-30 30A 240V or L6-20 120V with power cable “pigtails” available Have a large kettle with more than on heating element?  Up to 4 optional relay modules can be quickly installed allowing you to drive up to 5 heating elements simultaneously with one power controller Unique enclosure has provisions to route cables out of the back for table mounting, or out of the bottom for wall mounting.  Field changeable Integral DIN rail groove on the back allows connecting multiple controllers and relay modules together for wall or table mounting using readily available DIN mounting channels   Note: 240v pictured in reverse image. Power relay sold separately (not currently available in 120v). Mounting bracket sold separately (BL997).

    $262.99

  • Blichmann False bottom - 15 Gallon BoilerMaker G2 Brew Pot Blichmann False bottom - 15 Gallon BoilerMaker G2 Brew Pot

    Blichmann BoilerMaker G2 Brew Kettle - 15 gal. False Bottom

    These are designed to be used with the Blichmann BoilerMaker Brew Kettles for use in a mash tun. Will also work great if you're using whole hops in your boil kettle (for pellet hops, we recommend using the Blichmann HopBlocker). A patent pending button louver design is a hybrid of a perforated false bottom and a slotted manifold to give you the best of BOTH designs! Please Note: This False Bottom is for the BoilerMaker™ G2 15 gal Brew Pot by Blichmann Engineering™ and will not function with the G1 model.  For a 15 gal G1 BoilerMaker False Bottom, see BL313.  

    $108.99

  • Ss Brewtech - Brew Cube Ss Brewtech - Brew Cube

    Brew Cube | Ss BrewTech

    The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers. 19.75" x 19.75" x 17" Modular Design The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility. The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines. The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years. Unlimited Flexibility From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization. Pro Inspiration for the Home Brewer When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment. 3V eBrewing setup shown in example photo: (3) Brew Cubes (2) Brew Cube | Connection Bolts Brew Cube | Valve Tree 3V eController with Brew Cube eController Mount (2) eKettles InfuSsion Mash Tun RIMS (2) TC Pumps Various hose barbs, valves, silicone tubing, and fittings

    $199.95

  • Filter Sheets - Filtrox Versafix XE 64  - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 2 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 2 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 2 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3.0 Micron Mid Point: 2 Versafix XE 64 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 6.5 gal/hr (24 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    $89.99 - $264.99

  • Filter Sheets - Filtrox Versafix XE 44  - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 4 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 4 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 4 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 8.5 gal/hr (32 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

    $89.99 - $264.99

  • Smart Brew - eXact Smart Brew Starter kit - Water Test Smart Brew - eXact Smart Brew Starter kit - Water Test

    Smart Brew | eXact Smart Brew Starter kit | Water Test Kit

    The Smart Brew® Starter Kit comes prefigured with exactly what's needed to start testing your water for the perfect brew!  Each kit includes the eXact iDip® 525 photometer with the following eXact® Strips:  Total Hardness, Calcium Hardness, Total Alkalinity, pH, Chloride, and Sulfate.  Each kit is packed in a rugged and durable plastic case with secure fasteners and padded compartments. The eXact iDip® app is available to download for Free on Apple App Store and on Google Play app store on Android.  Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0.   Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each pH-II, High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99      

    $379.99

  • Quick Swivel Connector - Straight Barb Only -  9.5mm (3/8) - Duotight Compatible Quick Swivel Connector - Straight Barb Only -  9.5mm (3/8) - Duotight Compatible

    KegLand Quick Swivel Connector | 3/8" Straight Barb | 9.5 mm Duotight Compatible

    This straight barb in 3/8" (9.5mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 9.5 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31578

    $3.99

  • Stainless - Half Coupler 1 in.

    Stainless Half Coupler - 1 in.

    Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.

    $5.49

  • Stainless - 1/4 in. BSPT Elbow - Male to Female Stainless - 1/4 in. BSPT Elbow - Male to Female

    Stainless Elbow - 1/4 in. Male BSP x 1/4 in. Female BSP

    Male to female elbow. 1/4" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06613  

    $2.79

  • Stainless - 1/4 in. BSP Washer Stainless - 1/4 in. BSP Washer

    Stainless BSP Washer - 1/4 in.

    Stainless steel 1/4" BSP washer. KegLand Part Number: KL13574  

    $2.79

  • Stainless - 1 in. x 3/4 in. BSPP Coupler Stainless - 1 in. x 3/4 in. BSPP Coupler

    Stainless Coupler - 1 in. BSPP x 3/4 in. BSPP

    Stainless steel coupler or "reducing socket". 1" BSPP x 3/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10566  

    $6.59

  • Stainless - 1/2 in. x 3/8 in. BSPP Coupler Stainless - 1/2 in. x 3/8 in. BSPP Coupler

    Stainless Coupler - 1/2 in. BSPP x 3/8 in. BSPP

    Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580  

    $3.89

  • Stainless - 3/8 in. x 1/4 in. BSPP Coupler Stainless - 3/8 in. x 1/4 in. BSPP Coupler

    Stainless Coupler - 3/8 in. BSPP x 1/4 in. BSPP

    Stainless steel coupler or "reducing socket". 3/8" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10597  

    $2.79

  • Stainless - 3/8 in. BSPP Lock Nut Stainless - 3/8 in. BSPP Lock Nut

    Stainless Lock Nut - 3/8 in. BSPP

    Stainless Lock Nut. 3/8 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06514  

    $3.09

  • Ss BrewTech - Glycol Chiller - 3/8 HP Ss BrewTech - Glycol Chiller - 3/8 HP

    Glycol Chiller | 3/8hp | Ss BrewTech

    Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

    $1,499.00

  • Ss BrewTech - Glycol Chiller - 1/5 HP Ss BrewTech - Glycol Chiller - 1/5 HP

    Glycol Chiller | 1/5hp | Ss BrewTech

    The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features:  Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H  

    $999.00

  • RAPT - PC Heat Resistant Shelf Tray (60mm deep) RAPT - PC Heat Resistant Shelf Tray (60mm deep)

    RAPT Fermentation Chamber | Polycarbonate Heat Resistant Shelf Tray

    Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep. KegLand Part Number: KL25553    

    $43.99

  • Anvil Foundry Recirculation Pump Kit - 18 gal

    Anvil Foundry™ Recirculation Pump Kit - 18 gal.

    Anvil Foundry Recirculation Pump Kit for 18 gal units.   Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt

    $109.99

  • Blichmann HopRocket Draft Kit

    Blichmann HopRocket Draft kit

    This kit includes everything you need to connect your HopRocket™ to your draft system for freshly infused hop, coffee, or any flavor you may choose!

    $39.00

  • Blichmann BoilCoil - 7.5 gal / 120 v Blichmann BoilCoil - 7.5 gal / 120 v

    Blichmann BoilCoil | 7.5 Gallon | 120V

    This new Blichmann Engineering innovation redefines electric heating!  Unrivaled performance, speed, and simplicity.  Just plug in a BoilCoil™ immersion heater for immediate, high efficiency heat.  Ideal for indoor brewing and a perfect companion for your BoilerMaker­™ brew pot.  It is easily installed in your previously purchased BoilerMaker™ pot, or most other manufacturers pots by drilling two small 5/8" holes with our handy drill template.  We include a "plug and play" 12 ft factory wired cable with a molded twist-lock plug on one end, and our custom removable plug on the other end.  Hot, fast, and easy.  Just the way you like it. Features: Each BoilCoil™ is engineered to perform optimally in your BoilerMaker™ brew pot for consistent heating performance, boil quality, and boil-off rates.   Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!   Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling   The BoilCoil™ includes a "plug and play" 12 ft factory wired cable.   LESS THAN Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!).   Simple installation requires drilling only two small 5/8" holes with our handy drill template.   No risky welding or cutting massive holes in your pot to install, and features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.   The BoilCoil™ will fit in most competitive pots too!  See data tab for dimensional drawing.   Couple with the electric BrewCommander™ controller for the ultimate in temperature control.   Kettle Size: For 7.5 gal Boilermakers™ Rated Voltage (VAC): 120 v Recommended GFCI Breaker Size: 20 amp Power (W): 2000 W

    $152.99

  • Last stock! MB - Pro Sanitary Pump - 1 HP (w/ cart) and Variable Speed MB - Pro Sanitary Pump - 1 HP (w/ cart) and Variable Speed

    MB® Variable Speed Brewery Pump | Product Pump | 1.5" T.C. Connections | Mounted Control Panel | Trolley Cart | 13.2 GPM | 1 HP | 110V

    MB Variable Speed Pumps are an ideal tool in the brewhouse. These pumps feature a variable frequency drive that allows the pump to be supplied with 110V power. Using the built-in potentiometer speed control, run the pump at slow speeds for moving product with laminar flow or increase the speed to make the flow turbulent for efficient tube and pipe cleaning. This pump is designed to have very low shear loading to protect your product. Built on a robust stainless cart, with a stainless control panel, and a stainless motor guard. Moves quickly and easily around the brewhouse. The pump is also available by itself without the trolley cart and control panel (PMP650P). Features: 1.5" TC connections On/Off switch Emergency Shut Off Button Stainless Cart Stainless Motor Guard Stainless Control Panel GPM: 13.2 Max Head: 54' 1 HP Temperature Rating: 212°F Power: Input Power Required: 110-120V, 1ph, 60hz Amperage Draw: 8 amps Nema 5-15P plug  

    $2,859.99

  • Blichmann Tower of Power Communication Cable

    Blichmann Tower of Power - Communication Cable

    1 review

    This cable is designed to connect the Tower of Power Control Module to a computer. This allows you to automatically control your mash profile through your PC computer. It will remotely monitor your mash, and you can create unlimited mash profiles.

    $32.99

  • Power Adapter for MT353 Scale

    Power Adapter for MT353 Scale

    Never need batteries again for your High Precision Series Scale. For the American Weigh product AMW LB-501, our MT353. Input: 120V at 60Hz Output: 9V DC at 100mA

    $12.99

  • Tel-Tru - SD3 Digital Thermometer - 1.5" T.C. - PLACEHOLDER

    Tel-Tru SD3 Industrial Digital Thermometer | 1.5" Tri-Clamp | 3" Face

    The Tel-Tru SD3 digital thermometer is designed to deliver industry-leading value. It is rugged and dependable for use in sanitary applications, available in NPT or Tri-Clamp configurations to meet customer needs. All models are NIST traceable and include a lithium battery that lasts a minimum of 8 years.* The SD3 meets 3-A Sanitary Standard 74-07 requirements, making it suitable for commercial applications ranging from food & beverage to pharmaceutical or petrochemical, and more. Available with a 2.5" or 4.5" long probe. Heavy-duty 3" 304SS hermetically sealed case Digital sensor for maximum precision Response rate of 1 second 8-year lithium battery* Temperature Range: -67 to 302°F Accuracy: ±0.4°F High-visibility 0.4" tall LCD display 316SS probe Glass lens 1.5" TC connection Made in USA *Battery life expectancy is eight years at normal room temperature.

    $331.68

  • Quick Swivel Connector - Straight Barb Only  - 6.35mm (1/4) - Duotight Compatible Quick Swivel Connector - Straight Barb Only  - 6.35mm (1/4) - Duotight Compatible

    KegLand Quick Swivel Connector | 1/4" Straight Barb | 6.35 mm Duotight Compatible

    This straight barb in 1/4" (6.35mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 6.35 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31554

    $3.99

  • Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 2 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2" Outer Diameter - 2.43"    

    $89.99 - $549.99

  • Brass - 1/8 in. fpt x 1/4 in. mpt Bushing

    Brass - 1/8 in. FPT x 1/4 in. MPT Bushing

    Brass - 1/8'' fpt x 1/4'' mpt Bushing

    $1.99

  • Anvil O-ring Kit for Bucket Fermenter, Foundry, Crucible

    Anvil O-ring Kit for Bucket Fermenter, Foundry, Crucible

    Replacement O-rings for the Stainless Bucket Fermenter, Foundry™, and Crucible™ Valve.

    $9.99

Login

Forgot your password?

Don't have an account yet?
Create account